1:44 p.m.
I know the default answer, don't double nat, but in this case what I'm
doing is that I have a wireless travel router with WISP and I am using it
to create my own private & secured network behind a public network.
Web browsing works fine but when I try to perform a "dnf update" I get a
"Error: Failed to synchronize cache for repo 'updates'."
Since it's simple download, i,e, not a complicated connection like a VPN. I
don't know why it wouldn't work, but it apparently does not.
Ideas?
Thanks,
Richard
2:41 p.m.
On 07/03/2018 11:44 AM, Richard Shaw wrote:
I know the default answer, don't double nat, but in this case
what I'm
doing is that I have a wireless travel router with WISP and I am using
it to create my own private & secured network behind a public network.
Web browsing works fine but when I try to perform a "dnf update" I get a
"Error: Failed to synchronize cache for repo 'updates'."
Since it's simple download, i,e, not a complicated connection like a
VPN. I don't know why it wouldn't work, but it apparently does not.
A) Are you using a proxy? If so, have you added the appropriate config
lines to /etc/dnf/dnf.conf (proxy IP, username, password)?
B) Have you tried "dnf clean all" before trying the upgrade? You may
have some bad cached data.
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- The trouble with troubleshooting is that trouble sometimes -
- shoots back. -
----------------------------------------------------------------------
3:07 p.m.
On Tue, Jul 3, 2018 at 2:58 PM Rick Stevens <ricks(a)alldigital.com> wrote:
On 07/03/2018 11:44 AM, Richard Shaw wrote:
> I know the default answer, don't double nat, but in this case what I'm
> doing is that I have a wireless travel router with WISP and I am using
> it to create my own private & secured network behind a public network.
>
> Web browsing works fine but when I try to perform a "dnf update" I get a
> "Error: Failed to synchronize cache for repo 'updates'."
>
> Since it's simple download, i,e, not a complicated connection like a
> VPN. I don't know why it wouldn't work, but it apparently does not.
A) Are you using a proxy? If so, have you added the appropriate config
lines to /etc/dnf/dnf.conf (proxy IP, username, password)?
Need to double check that, I did setup a squid proxy on my desktop but I'm
not sure if I have the laptop setup to use it or not... Good idea.
B) Have you tried "dnf clean all" before trying the
upgrade? You may
have some bad cached data.
Nope, as soon as I switched back to my home network it worked fine. I think
(A) may be the problem.
Thanks,
Richard
9:04 p.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On Tue, Jul 3, 2018 at 3:07 PM Richard Shaw <hobbes1069(a)gmail.com> wrote:
On Tue, Jul 3, 2018 at 2:58 PM Rick Stevens
<ricks(a)alldigital.com> wrote:
> On 07/03/2018 11:44 AM, Richard Shaw wrote:
> > I know the default answer, don't double nat, but in this case what I'm
> > doing is that I have a wireless travel router with WISP and I am using
> > it to create my own private & secured network behind a public network.
> > > Web browsing works fine but when I try to perform a
"dnf update" I get a
> > "Error: Failed to synchronize cache for repo 'updates'."
> > > Since it's simple download, i,e, not a
complicated connection like a
> > VPN. I don't know why it wouldn't work, but it apparently does not.
> A) Are you using a proxy? If so, have you added the
appropriate config
> lines to /etc/dnf/dnf.conf (proxy IP, username, password)?
Need to double check that, I did setup a squid proxy on my desktop but I'm
not sure if I have the laptop setup to use it or not... Good idea.
Just to confirm, I did have the laptop setup to use the squid proxy on my
desktop so that was indeed the cause of the problem.
Thanks,
Richard
11:34 a.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On 07/03/2018 07:04 PM, Richard Shaw wrote:
On Tue, Jul 3, 2018 at 3:07 PM Richard Shaw <hobbes1069(a)gmail.com
<mailto:hobbes1069@gmail.com>> wrote:
On Tue, Jul 3, 2018 at 2:58 PM Rick Stevens <ricks(a)alldigital.com
<mailto:ricks@alldigital.com>> wrote:
On 07/03/2018 11:44 AM, Richard Shaw wrote:
> I know the default answer, don't double nat, but in this case
what I'm
> doing is that I have a wireless travel router with WISP and I
am using
> it to create my own private & secured network behind a public
network.
>
> Web browsing works fine but when I try to perform a "dnf
update" I get a
> "Error: Failed to synchronize cache for repo 'updates'."
>
> Since it's simple download, i,e, not a complicated connection
like a
> VPN. I don't know why it wouldn't work, but it apparently does
not.
A) Are you using a proxy? If so, have you added the appropriate
config
lines to /etc/dnf/dnf.conf (proxy IP, username, password)?
Need to double check that, I did setup a squid proxy on my desktop
but I'm not sure if I have the laptop setup to use it or not... Good
idea.
Just to confirm, I did have the laptop setup to use the squid proxy on
my desktop so that was indeed the cause of the problem.
Glad you got that sorted out.
Just for the sake of completeness on the thread, how did you resolve it?
Did you add the lines to dnf.conf to access your proxy properly?
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- If Windows isn't a virus, then it sure as hell is a carrier! -
----------------------------------------------------------------------
12:59 p.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On Thu, Jul 5, 2018 at 11:35 AM Rick Stevens <ricks(a)alldigital.com> wrote:
On 07/03/2018 07:04 PM, Richard Shaw wrote:
> Just to confirm, I did have the laptop setup to use the squid proxy on
> my desktop so that was indeed the cause of the problem.
Glad you got that sorted out.
Just for the sake of completeness on the thread, how did you resolve it?
Did you add the lines to dnf.conf to access your proxy properly?
There's not a good way... Ideally DNF would skip the proxy if not available
but there doesn't appear to be an option for that so I just comment out the
proxy option in /etc/dnf/dnf.conf when I'm outside of my home network.
Thanks,
Richard
1:46 p.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On 07/05/2018 10:59 AM, Richard Shaw wrote:
On Thu, Jul 5, 2018 at 11:35 AM Rick Stevens
<ricks(a)alldigital.com
<mailto:ricks@alldigital.com>> wrote:
On 07/03/2018 07:04 PM, Richard Shaw wrote:
> Just to confirm, I did have the laptop setup to use the squid proxy on
> my desktop so that was indeed the cause of the problem.
Glad you got that sorted out.
Just for the sake of completeness on the thread, how did you resolve it?
Did you add the lines to dnf.conf to access your proxy properly?
There's not a good way... Ideally DNF would skip the proxy if not
available but there doesn't appear to be an option for that so I just
comment out the proxy option in /etc/dnf/dnf.conf when I'm outside of my
home network.
Ah. Well, you could create a second conf file, say
/etc/dnf/dnf-noproxy.conf
that doesn't have the proxy lines and use:
dnf -c /etc/dnf/dnf-noproxy.conf [options] <command>
to use it outside your network. Inside your network, the standard
dnf [options] <command>
would use the default conf file (with the proxy lines).
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- Vegetarian: Old Indian word for "lousy hunter" -
----------------------------------------------------------------------
2:09 p.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On 07/05/2018 11:46 AM, Rick Stevens wrote:
that doesn't have the proxy lines and use:
dnf -c /etc/dnf/dnf-noproxy.conf [options] <command>
to use it outside your network.
If you're going to be using that fairly often, add this to .bashrc:
alias dnp=dnf -c /etc/dnf/dnf-noproxy.conf
That way you won't have to remember the exact path to the config file.
3:44 p.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On 07/05/2018 12:09 PM, Joe Zeff wrote:
On 07/05/2018 11:46 AM, Rick Stevens wrote:
> that doesn't have the proxy lines and use:
>
> dnf -c /etc/dnf/dnf-noproxy.conf [options] <command>
>
> to use it outside your network.
If you're going to be using that fairly often, add this to .bashrc:
alias dnp=dnf -c /etc/dnf/dnf-noproxy.conf
That way you won't have to remember the exact path to the config file.
Good point, Joe.
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- "How does that damned three seashell thing work?" -
- -- Sylvester Stallone, "Demolition Man" -
----------------------------------------------------------------------
7:15 p.m.
New subject: Can't perform update when double nat'ing [SOLVED}
On 07/05/2018 10:59 AM, Richard Shaw wrote:
There's not a good way... Ideally DNF would skip the proxy if not
available but there doesn't appear to be an option for that so I just
comment out the proxy option in /etc/dnf/dnf.conf when I'm outside of my
home network.
Yes, I would love to have it work that way. I've been considering how
hard it would be to make a dnf plugin to do that.
2130
days inactive
2133
days old
9 comments
4 participants
participants (4)
-
Joe Zeff -
Richard Shaw -
Rick Stevens -
Samuel Sieb