FC6: No display on screen; Savage Video Card

Hi List,

I just installed FC6 on my old computer. everything was fine until I rebooted computer. I
did install in graphic mode. My S3 Savage4 video card (32MB RAM) and Benq FP767-12 LCD
Monitor were correctly identified. However on boot display is going blank.

I tried Xorg -configure, which generated attached file, however did not resolve issue. 
Attached below are Xorg.conf and Xorg.0.log: (last few lines).
Please let me know if any one wnat to see full log file.
I would appreciate help from list.

Thanks...

Rajesh
====================================
xorg.conf:
----------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "unix/:7100"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "vnc"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "xtrap"
	Load  "dri"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  340   270	# mm
	Identifier   "Monitor0"
	VendorName   "BNQ"
	ModelName    "BenQ FP767-12"
 ### Comment all HorizSync and VertSync values to use DDC:
	HorizSync    31.0 - 83.0
	VertRefresh  56.0 - 76.0
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
        ### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "HWCursor"           	# [<bool>]
        #Option     "SWCursor"           	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "UseBIOS"            	# [<bool>]
        #Option     "LCDClock"           	# <freq>
        #Option     "ShadowStatus"       	# [<bool>]
        #Option     "CrtOnly"            	# [<bool>]
        #Option     "TvOn"               	# [<bool>]
        #Option     "PAL"                	# [<bool>]
        #Option     "ForceInit"          	# [<bool>]
        #Option     "Overlay"            	# [<str>]
        #Option     "TransparencyKey"    	# [<str>]
        #Option     "ForceInit"          	# [<bool>]
        #Option     "DisableXVMC"        	# [<bool>]
        #Option     "DisableTile"        	# [<bool>]
        #Option     "DisableCOB"         	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "BCIforXv"           	# [<bool>]
        #Option     "DVI"                	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "DmaType"            	# [<str>]
        #Option     "DmaMode"            	# [<str>]
        #Option     "AGPMode"            	# <i>
        #Option     "AGPSize"            	# <i>
	Identifier  "Card0"
	Driver      "savage"
	VendorName  "S3 Inc."
	BoardName   "Savage 4"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
====================================
Xorg.0.log: (last few lines)
-----------------------------

(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) SAVAGE(0): [drm] removed 1 reserved context for kernel
(II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xcfc4c000 at 0xb7f67000
FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.