11:15 a.m.
[first time went without a subject somehow...]
Hi,
Anyone still using mrtg these days? I'm trying to set up mrtg on my
fedora25 system connected to a cable modem (35Mbit up, 5Mbit down) on
one side and a gigabit ethernet on the other and can't figure out how
to reflect that in the config file.
Maybe you have an idea for monitoring utilization using another method?
I'm trying to set it up to determine utilization, so it's important to
define the upper bound for both upload and download. Is this possible?
If I recall, isn't there a way to define input max and output max?
I've run the following cfgmaker command:
# cfgmaker --ifref=descr --ifdesc=alias -zero-speed=5000000
mysnmppass(a)orion.example.com
Here is the ifconfig output for my system. I've also included the
generated cfgmaker output (with 'example' as my domain) below. I don't
understand why it's defined eth0 and eth1 as 125MBit when it's
connected to a bridge on a gigabit network, and why it's chosen
625kbit for br0 when I've tried to define it as 5Mbit.
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 68.111.193.42 netmask 255.255.255.248 broadcast 68.111.193.47
inet6 fe80::ec4:7aff:fea9:18de prefixlen 64 scopeid 0x20<link>
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
RX packets 5891321629 bytes 2564661840218 (2.3 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3670532823 bytes 22827372375556 (20.7 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
br0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 68.111.193.44 netmask 255.255.255.248 broadcast 68.111.193.47
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
RX packets 6303244831 bytes 2755299573703 (2.5 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18098110833 bytes 24060466118480 (21.8 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb120000-fb13ffff
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::ec4:7aff:fea9:18df prefixlen 64 scopeid 0x20<link>
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
RX packets 22104249713 bytes 13271044125506 (12.0 TiB)
RX errors 0 dropped 0 overruns 44 frame 0
TX packets 16730830652 bytes 3413227489426 (3.1 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb100000-fb11ffff
eth1:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.6.1 netmask 255.255.255.0 broadcast 192.168.6.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.101 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 55198240 bytes 9250184967 (8.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 55198240 bytes 9250184967 (8.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:63:b9:2a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:fe35:dd67 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:35:dd:67 txqueuelen 1000 (Ethernet)
RX packets 174594324 bytes 160713095174 (149.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 200965168 bytes 104887504535 (97.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:fe35:dd66 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:35:dd:66 txqueuelen 1000 (Ethernet)
RX packets 16552006 bytes 139318192739 (129.7 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 30615686 bytes 3092083364 (2.8 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Here is the mrtg.cfg with the disabled interfaces and unnecessary HTML
removed. I've also included the cfgmaker snmp info below.
EnableIPv6: no
Target[orion.example.com_eth0]: \eth0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_eth0]: MRTG_INT_IP="No Ip"
MRTG_INT_DESCR="eth0"
MaxBytes[orion.example.com_eth0]: 125000000
Title[orion.example.com_eth0]: eth0 -- orion.inside.example.com
PageTop[orion.example.com_eth0]: <h1>eth0 -- orion.inside.example.com</h1>
Target[orion.example.com_eth1]: \eth1:mysnmppass@orion.example.com:
SetEnv[orion.example.com_eth1]: MRTG_INT_IP="192.168.6.1"
MRTG_INT_DESCR="eth1"
MaxBytes[orion.example.com_eth1]: 125000000
Title[orion.example.com_eth1]: eth1 -- orion.inside.example.com
PageTop[orion.example.com_eth1]: <h1>eth1 -- orion.inside.example.com</h1>
Target[orion.example.com_br0]: \br0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_br0]: MRTG_INT_IP="68.111.193.42"
MRTG_INT_DESCR="br0"
MaxBytes[orion.example.com_br0]: 625000
Title[orion.example.com_br0]: br0 -- orion.inside.example.com
PageTop[orion.example.com_br0]: <h1>br0 -- orion.inside.example.com</h1>
Target[orion.example.com_vnet0]: \vnet0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_vnet0]: MRTG_INT_IP="No Ip"
MRTG_INT_DESCR="vnet0"
MaxBytes[orion.example.com_vnet0]: 1250000
Title[orion.example.com_vnet0]: vnet0 -- orion.inside.example.com
PageTop[orion.example.com_vnet0]: <h1>vnet0 -- orion.inside.example.com</h1>
Target[orion.example.com_vnet1]: \vnet1:mysnmppass@orion.example.com:
SetEnv[orion.example.com_vnet1]: MRTG_INT_IP="No Ip"
MRTG_INT_DESCR="vnet1"
MaxBytes[orion.example.com_vnet1]: 1250000
Title[orion.example.com_vnet1]: vnet1 -- orion.inside.example.com
PageTop[orion.example.com_vnet1]: <h1>vnet1 -- orion.inside.example.com</h1>
--base: Get Device Info on mysnmppass(a)orion.example.com:
--base: Vendor Id: Unknown Vendor - 1.3.6.1.4.1.8072.3.2.10
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifIndex = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifIndex = 2
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifIndex = 3
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifIndex = 4
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifIndex = 5
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifIndex = 6
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifIndex = 7
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifIndex = 8
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifIndex = 9
--base: Walking ifType
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifType = 24
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifType = 131
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifType = 6
--base: Walking ifAdminStatus
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifAdminStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifAdminStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifAdminStatus = 1
--base: Walking ifOperStatus
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifOperStatus = 1
--base: Walking ifMtu
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifMtu = 65536
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifMtu = 1332
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifMtu = 1500
--base: Walking ifSpeed
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifSpeed = 1000000000
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifSpeed = 1000000000
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifSpeed = 10000000
9:11 a.m.
On 06/07/2017 09:15 AM, Alex wrote:
[first time went without a subject somehow...]
Hi,
Anyone still using mrtg these days? I'm trying to set up mrtg on my
fedora25 system connected to a cable modem (35Mbit up, 5Mbit down) on
one side and a gigabit ethernet on the other and can't figure out how
to reflect that in the config file.
Maybe you have an idea for monitoring utilization using another method?
I'm trying to set it up to determine utilization, so it's important to
define the upper bound for both upload and download. Is this possible?
If I recall, isn't there a way to define input max and output max?
I've run the following cfgmaker command:
# cfgmaker --ifref=descr --ifdesc=alias -zero-speed=5000000
mysnmppass(a)orion.example.com
Here is the ifconfig output for my system. I've also included the
generated cfgmaker output (with 'example' as my domain) below. I don't
understand why it's defined eth0 and eth1 as 125MBit when it's
connected to a bridge on a gigabit network, and why it's chosen
625kbit for br0 when I've tried to define it as 5Mbit.
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 68.111.193.42 netmask 255.255.255.248 broadcast 68.111.193.47
inet6 fe80::ec4:7aff:fea9:18de prefixlen 64 scopeid 0x20<link>
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
RX packets 5891321629 bytes 2564661840218 (2.3 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3670532823 bytes 22827372375556 (20.7 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
br0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 68.111.193.44 netmask 255.255.255.248 broadcast 68.111.193.47
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 0c:c4:7a:a9:18:de txqueuelen 1000 (Ethernet)
RX packets 6303244831 bytes 2755299573703 (2.5 TiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18098110833 bytes 24060466118480 (21.8 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb120000-fb13ffff
eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::ec4:7aff:fea9:18df prefixlen 64 scopeid 0x20<link>
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
RX packets 22104249713 bytes 13271044125506 (12.0 TiB)
RX errors 0 dropped 0 overruns 44 frame 0
TX packets 16730830652 bytes 3413227489426 (3.1 TiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfb100000-fb11ffff
eth1:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.6.1 netmask 255.255.255.0 broadcast 192.168.6.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
eth1:3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.101 netmask 255.255.255.0 broadcast 192.168.1.255
ether 0c:c4:7a:a9:18:df txqueuelen 1000 (Ethernet)
device memory 0xfb100000-fb11ffff
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 55198240 bytes 9250184967 (8.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 55198240 bytes 9250184967 (8.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255
ether 52:54:00:63:b9:2a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:fe35:dd67 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:35:dd:67 txqueuelen 1000 (Ethernet)
RX packets 174594324 bytes 160713095174 (149.6 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 200965168 bytes 104887504535 (97.6 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::fc54:ff:fe35:dd66 prefixlen 64 scopeid 0x20<link>
ether fe:54:00:35:dd:66 txqueuelen 1000 (Ethernet)
RX packets 16552006 bytes 139318192739 (129.7 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 30615686 bytes 3092083364 (2.8 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Here is the mrtg.cfg with the disabled interfaces and unnecessary HTML
removed. I've also included the cfgmaker snmp info below.
EnableIPv6: no
Target[orion.example.com_eth0]: \eth0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_eth0]: MRTG_INT_IP="No Ip"
MRTG_INT_DESCR="eth0"
MaxBytes[orion.example.com_eth0]: 125000000
Title[orion.example.com_eth0]: eth0 -- orion.inside.example.com
PageTop[orion.example.com_eth0]: <h1>eth0 -- orion.inside.example.com</h1>
Target[orion.example.com_eth1]: \eth1:mysnmppass@orion.example.com:
SetEnv[orion.example.com_eth1]: MRTG_INT_IP="192.168.6.1"
MRTG_INT_DESCR="eth1"
MaxBytes[orion.example.com_eth1]: 125000000
Title[orion.example.com_eth1]: eth1 -- orion.inside.example.com
PageTop[orion.example.com_eth1]: <h1>eth1 -- orion.inside.example.com</h1>
Target[orion.example.com_br0]: \br0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_br0]: MRTG_INT_IP="68.111.193.42"
MRTG_INT_DESCR="br0"
MaxBytes[orion.example.com_br0]: 625000
Title[orion.example.com_br0]: br0 -- orion.inside.example.com
PageTop[orion.example.com_br0]: <h1>br0 -- orion.inside.example.com</h1>
Target[orion.example.com_vnet0]: \vnet0:mysnmppass@orion.example.com:
SetEnv[orion.example.com_vnet0]: MRTG_INT_IP="No Ip"
MRTG_INT_DESCR="vnet0"
MaxBytes[orion.example.com_vnet0]: 1250000
Title[orion.example.com_vnet0]: vnet0 -- orion.inside.example.com
PageTop[orion.example.com_vnet0]: <h1>vnet0 -- orion.inside.example.com</h1>
Target[orion.example.com_vnet1]: \vnet1:mysnmppass@orion.example.com:
SetEnv[orion.example.com_vnet1]: MRTG_INT_IP="No Ip"
MRTG_INT_DESCR="vnet1"
MaxBytes[orion.example.com_vnet1]: 1250000
Title[orion.example.com_vnet1]: vnet1 -- orion.inside.example.com
PageTop[orion.example.com_vnet1]: <h1>vnet1 -- orion.inside.example.com</h1>
--base: Get Device Info on mysnmppass(a)orion.example.com:
--base: Vendor Id: Unknown Vendor - 1.3.6.1.4.1.8072.3.2.10
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifIndex = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifIndex = 2
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifIndex = 3
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifIndex = 4
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifIndex = 5
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifIndex = 6
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifIndex = 7
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifIndex = 8
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifIndex = 9
--base: Walking ifType
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifType = 24
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifType = 131
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifType = 6
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifType = 6
--base: Walking ifAdminStatus
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifAdminStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifAdminStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifAdminStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifAdminStatus = 1
--base: Walking ifOperStatus
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifOperStatus = 2
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifOperStatus = 1
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifOperStatus = 1
--base: Walking ifMtu
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifMtu = 65536
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifMtu = 1332
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifMtu = 1500
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifMtu = 1500
--base: Walking ifSpeed
--snpd: mysnmppass(a)orion.example.com: -> 1 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 2 -> ifSpeed = 1000000000
--snpd: mysnmppass(a)orion.example.com: -> 3 -> ifSpeed = 1000000000
--snpd: mysnmppass(a)orion.example.com: -> 4 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 5 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 6 -> ifSpeed = 0
--snpd: mysnmppass(a)orion.example.com: -> 7 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 8 -> ifSpeed = 10000000
--snpd: mysnmppass(a)orion.example.com: -> 9 -> ifSpeed = 10000000
I haven't edited the message so others can take a shot.
We still use MRTG as a part of Nagios and Cacti in our monitoring
systems but I haven't done any manual configs in a very long time. One
common thing to keep in mind is that although NICs are generally
specified in bits-per-second, SNMP (and consequently mrtg) use bytes-
per-second. One gigabit IS 125,000,000 bytes (1,000,000,000 / 8 =
125,000,000).
The MaxBytes option simply tells mrtg that values above this are to be
ignored (ditto with AbsBytes). The primary idea is for mrtg to ignore
nonsensical data which sometimes happens.
I don't know if cfgmaker permits you to specify the "Thresh[Min|Max]*"
options. That may still be a "manual, go hack the config yourself" step
as it was back in the day (and a common reason people use Cacti (it
allows you to set thresholds relatively easily through its GUI).
----------------------------------------------------------------------
- Rick Stevens, Systems Engineer, AllDigital ricks(a)alldigital.com -
- AIM/Skype: therps2 ICQ: 226437340 Yahoo: origrps2 -
- -
- BASIC is the Computer Science version of `Scientific Creationism' -
----------------------------------------------------------------------
7:35 a.m.
Hi,
On Wed, Jun 7, 2017 at 10:11 AM, Rick Stevens <ricks(a)alldigital.com> wrote:
I haven't edited the message so others can take a shot.
We still use MRTG as a part of Nagios and Cacti in our monitoring
systems but I haven't done any manual configs in a very long time. One
common thing to keep in mind is that although NICs are generally
specified in bits-per-second, SNMP (and consequently mrtg) use bytes-
per-second. One gigabit IS 125,000,000 bytes (1,000,000,000 / 8 =
125,000,000).
The MaxBytes option simply tells mrtg that values above this are to be
ignored (ditto with AbsBytes). The primary idea is for mrtg to ignore
nonsensical data which sometimes happens.
I don't know if cfgmaker permits you to specify the "Thresh[Min|Max]*"
options. That may still be a "manual, go hack the config yourself" step
as it was back in the day (and a common reason people use Cacti (it
allows you to set thresholds relatively easily through its GUI).
Thanks very much for the info. It's also been like a decade since I've
had to configure mrtg. Most of my concern comes from the large
disparity between the download (35mbit) and the upload (5mbit), and
the upload getting lost on the graph.
Ideas for other utilization graphing programs would be appreciated.
2513
days inactive
2515
days old
2 comments
2 participants
participants (2)
-
Alex -
Rick Stevens