Re: Re: DNS Woes
by stucklenp＠charter.net
Mark:
route -n yields
Destination Gateway Genmask Flags Metric Ref Use IFace
24.159.200.0 0.0.0.0 255.255.252.0 U 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 lo
0.0.0.0 24.159.200.1 0.0.0.0 UG 0 0 eth0
"route print" on Windoze yields:
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 24.159.200.1 24.159.201.xxx 20
24.159.200.0 255.255.252.0 24.159.201.xxx 24.159.201.xxx 20
24.159.201.xxx 255.255.255.255 127.0.0.1 127.0.0.1 20
24.255.255.255 255.255.255.255 24.159.201.xxx 24.159.201.xxx 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
224.0.0.0 240.0.0.0 24.159.201.xxx 24.159.201.xxx 20
255.255.255.255 255.255.255.255 24.159.201.xxx 24.159.201.xxx 1
Default Gateway: 24.159.200.1
where "24.159.201.xxx" is the leased IP.
Thanks for any assistance.
Paul
>
> From: Mark Neidorff <mark(a)neidorff.com>
> Date: 2004/03/27 Sat PM 05:54:13 GMT
> To: For users of Fedora Core releases <fedora-list(a)redhat.com>
> Subject: Re: DNS Woes
>
> There is a lot of information missing here.
>
> I assuming you are using fedora.
> Are you using webmin?
> What happens when you run (as root) route -n ? Is your gateway listed? Is
> it correct?
>
> Lets start there.
>
> Mark
>
> On Sat, 27 Mar 2004 stucklenp(a)charter.net wrote:
>
> > I have a challenge: since running "yum update" and blindly accepting all the packages and then rebooting, I have not been able to get my Fedora box on the Web. Since that system is my firewall box it is really important that I get it running again. Note that I get the same symptoms with or without the firewall running.
> >
> > The NIC is configured to "Automatically obtain IP address settings with DHCP" and "Automatically obtain DNS information from provider" (I have tried manually setting DNS addresses as well.)
> >
> > When the network service is started, the NIC does get a valid IP from the ISP, as verified by the ISP. As well, I see the lease information in the messages log.
> > "...dhclient: bound to <myIP> -- renual in 13961 seconds...
> > ifup: done...
> > network: Bringing up interface etho: succeeded"
> >
> >
> > Other Symptoms:
> > ping <external IP> results in "Destination port Unreachable."
> > ping <leased IP> Works fine.
> >
> > Redhat Network Configuration show the NIC active and "ok"
> > resolve.conf contains the correct IPs for the ISP's DNS servers.
> >
> > To add insult to injury, when I plug my Windoze box into the cable modem and set its IP to use DHCP, I have no problem attaching to the Web.
> >
> > Any ideas as to how I can resolve this?
> >
> > Thanks
> >
> >
> >
>
> --
> Sign over a gynecologist's office: "Dr. Jones, at your cervix."
>
>
> --
> fedora-list mailing list
> fedora-list(a)redhat.com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
20 years, 3 months
KDE 3.2
by Steve Waggitt
I've been trying to get apt configured so that I can upgrade to KDE 3.2. I've
tried following the instructions on the KDE Red Hat pages but keep getting a
failed message when updating the package lists with apt. Any help would be
appreciated.
20 years, 3 months
Re: Fedora core 1 sendmail problems
by Homer Sapions
Alexander has come to the conclusion, as I had, that the problem is not
sendmail itself. He has been giving me substantial amounts of advice in
email and has looked over some of my configs and thinks they are ok. During
part of my debugging today, I decided to try procmail as well, and it
suffers from the same problem. I can send mail, but not receive. I had
tcpdump running all day, and could see Alexander trying to get to me. He
would not get an immediate disconnect, but it seemed to timeout. During this
time, my server was sending SYN,ACK pairs, but they apparently never got
back to him.
The weird thing here, is that all web traffic works fine. Surely if there
was a netmask problem of any sort, I would have the same problem - users
would connect to one of my 4 or 5 virtual web servers running under apache,
and not get anything back? All http traffic works fine, as do CGI script,
Squirrelmail etc.
I'll try a few more ideas and post my findings when I get it working. It
will be when, and not if!
Alexander deserves a public thanks for spending a LOT of time in emails with
me trying to help resolve the problem, he gave me a lot of help, but as he
said, remotely, it's very hard to diagnose a problem like this.
Unfortnately, the weekend is almost over, and I have to go to work tomorro,
so I'll try this again over the next few days.
>From: Ron Herardian <rherardi(a)gssnet.com>
>Reply-To: For users of Fedora Core releases <fedora-list(a)redhat.com>
>To: For users of Fedora Core releases <fedora-list(a)redhat.com>
>Subject: Re: Fedora core 1 sendmail problems
>Date: Sun, 28 Mar 2004 19:03:17 -0800
>
>
>In reviewing this thread it seems to me there could be an underlying
>network issue not related to the sendmail configuration, despite port
>forwarding for port 25 apparently working as before. Although the MTA is
>accepting connections from hosts on the local IP network (you can telnet to
>port 25 as Alexander reminded me) it may not be able to send a response to
>a host over the Internet.
>
>As others have suggested, it's best to rule out network configuration
>problems, e.g., a wrong netmask or router setting that would not affect
>local traffic but that would break IP connections from remote networks.
>What you're observing might be produced, for example, if the route to the
>remote network were incorrect, i.e., your server gets the TCP connect via
>port redirection through your NetGear box and sends an ACK but the remote
>never gets it because the ACK never leaves the local network (routing
>problem, e.g., bad netmask).
>
>What happens when you try to telnet from a remote host (not on your local
>network)? If the connection is dropped right away it would suggest that the
>originating host cannot get a connection on port 25. If the connection
>times out, e.g., after a few seconds, it would suggest a firewall or
>routing issue, i.e., packets are lost or discarded/dropped. I suspect
>you'll find the latter.
_________________________________________________________________
Get rid of annoying pop-up ads with the new MSN Toolbar FREE!
http://toolbar.msn.com/go/onm00200414ave/direct/01/
20 years, 3 months
Samba problem
by Steven J. Brown (NY)
I have desktop computers running Windows 2000 at 2 locations (one in New
York, the other in New Jersey). Both are on the same network. I have a
notebook computer running Fedora Core. I can ping the other computers
from the notebook. I can also remotely control them using various VNC
clients. However, my problem is with mounting the shared drives of the
desktop computers on my notebook. Only the computer at the location
where I connect my notebook can be mounted. The distant computer gives
me an 'SMB connection failed' error message.
lines from /etc/fstab (passwords fake):
//sbrown/C$ /home/sbrown/ny smbfs
username=sbrown,password=abcdefg,rw
//sbrownvldc/D$ /home/sbrown/nj smbfs
username=sbrown,password=abcdefg,rw
Using the mount command at the command line also fails.
Any help would be appreciated.
--------------------------------------------------
This transmission contains information intended to be confidential and solely for the use of Value Line, Inc., and those persons or entities to whom it is directed. It is not to be reproduced, retransmitted, or in any other manner distributed. If you receive this message in error, please immediately delete it and all copies of it from your system, destroy any hard copies of it and notify the sender.
20 years, 3 months
Modifying Sendmail rc script
by Al Sparks
I'm rolling my own sendmail, and I'm trying to modify a sendmail init
script set up for RH.
I want to add
daemon sendmail �Ac �q5m
to the already inserted
daemon /usr/sbin/sendmail -L sm-mta -bd -q1h
So I modified the sendmail startup with:
start() {
# Start daemons.
daemon /usr/sbin/sendmail -L sm-mta -bd -q1h
echo -n $"Starting $prog: "
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/sendmail
# return $RETVAL
daemon /usr/sbin/sendmail -Ac -q5m
echo -n $"Starting $prog: "
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/sendmail
return $RETVAL
}
But of course, when I use the same script to stop the process, it only
stops the
/usr/sbin/sendmail -L sm-mta -bd -q1h
process.
I figure the cleanest way to make this work is to get both processes
in
/var/run/sendmail.pid
The comments inside the /etc/rc.d/init.d/functions seem to imply that
you can have 2 processes inside sendmail.pid for killproc to act on.
Suggestions?
=== Al
20 years, 3 months
Re: Print server
by Brian Johnson
We have thin clients running LTSP that work great as print servers.
I have them booting off floppies and then getting the kernel image from the
server
Once the server is configured, setting up additional thin clients and remote x
terminals is easy (gui configuration is a bit harder)
Jon Shorie (jshorie(a)medinaco.org) wrote:
>
> On Monday 29 March 2004 11:55, fedora-list-request(a)redhat.com wrote:
> > Jon Shorie wrote:
> > >On Sunday 28 March 2004 13:34, fedora-list-request(a)redhat.com wrote:
> > >
> > >
> > >>Anyone got any ideas about the best way to turn an old 486 into a print
> > >>server for a Canon BJC3000 ink printer (AFAIK not aWinPrinter) on my
> > >>network?
> > >>
> > >>Thank
> > >>
> > >
> > >We have several printers running here with various dot matrix/laser/ink
> > > jet printers hooked up. If the printer in question, is not usb, then I
> > > would suggest just using Redhat 6.2 for your print server. This is what
> > > we have done. If it is a usb printer, then make sure that your 486 has a
> > > usb port (yes some do) and then install redhat 7.3.
> > >
> > >We have as little as a 486dx2/50 supporting two dot matrix printers. Our
> > >uptime for this box is 207 days. The only time that it needs rebooted is
> > >when there is a significant power outage.
> > >
> > >
> > >
> >
> > Hi Jon,
> >
> > Is it not better to use CUPS with an ink printer or does it not make any
> > real difference?
> >
> > Thanks..
>
> I use cups for printing on our linux desktop pc's, but the print servers are
> running lpr or lprng. They get along well as long as you remember on the
> client pc to click on the strict RFC 1197 option in the printer settings.
>
> We currently have 4 print servers running Redhat 6.2 and LPR and 2 print
> servers running 7.3 and LPRNG. The big advantage is that lprng will stay up
> even if one of the print queues goes down where on LPR it is possible to
> crash all print queues by just messing up one of them.
>
>
>
20 years, 3 months
Re: Print server
by Jon Shorie
On Monday 29 March 2004 11:55, fedora-list-request(a)redhat.com wrote:
> Jon Shorie wrote:
> >On Sunday 28 March 2004 13:34, fedora-list-request(a)redhat.com wrote:
> >
> >
> >>Anyone got any ideas about the best way to turn an old 486 into a print
> >>server for a Canon BJC3000 ink printer (AFAIK not aWinPrinter) on my
> >>network?
> >>
> >>Thank
> >>
> >
> >We have several printers running here with various dot matrix/laser/ink
> > jet printers hooked up. If the printer in question, is not usb, then I
> > would suggest just using Redhat 6.2 for your print server. This is what
> > we have done. If it is a usb printer, then make sure that your 486 has a
> > usb port (yes some do) and then install redhat 7.3.
> >
> >We have as little as a 486dx2/50 supporting two dot matrix printers. Our
> >uptime for this box is 207 days. The only time that it needs rebooted is
> >when there is a significant power outage.
> >
> >
> >
>
> Hi Jon,
>
> Is it not better to use CUPS with an ink printer or does it not make any
> real difference?
>
> Thanks..
I use cups for printing on our linux desktop pc's, but the print servers are
running lpr or lprng. They get along well as long as you remember on the
client pc to click on the strict RFC 1197 option in the printer settings.
We currently have 4 print servers running Redhat 6.2 and LPR and 2 print
servers running 7.3 and LPRNG. The big advantage is that lprng will stay up
even if one of the print queues goes down where on LPR it is possible to
crash all print queues by just messing up one of them.
20 years, 3 months
nvidia and XFree86-Mesa-libGL --- any changes?
by Clint Harshaw
I searched the archive and the artoo faq regarding the old issue with
nvidia and XFree86-Mesa-libGL, but didn't find a definitive answer to
the following (long-winded) question:
I am using the instructions found at the artoo site to install the
livna.org rpm:
yum install kernel-module-nvidia-`(rpm -q
--queryformat="%{version}-%{release}\n" kernel | tail -n 1)`
Before doing this installation, I used to use the alternate instructions
found at the artoo site
(http://fedora.artoo.net/faq/custom_nvidia.html). I would also have to
carry out:
rpm -e XFree86-Mesa-libGL
The faq there says that "The need to do this should soon be eliminated
-- watch this FAQ or the fedora-list."
I checked the archive for XFree86-Mesa-libGL but have not found anything
posted relative to this since Nov '03.
Has the need to do "rpm -e XFree86-Mesa-libGL" been eliminated with the
livna.org rpms?
Thanks,
Clint
20 years, 3 months
