I found /sbin/udevstart but there is no udevstop. Can I kill -1 the
running udevd, or do I kill -9 the udevd followed by a udevstart, or do I
have to reboot?
Time flies like the wind. Fruit flies like a banana. Stranger things have .0.
happened but none stranger than this. Does your driver's license say Organ ..0
Donor?Black holes are where God divided by zero. Listen to me! We are all- 000
individuals! What if this weren't a hypothetical question?
steveo at syslang.net
httpd fails at boot with no message as to why it failed.
]# service httpd start
Starting httpd: httpd: Syntax error on line 170
of /etc/httpd/conf/httpd.conf: Cannot
load /etc/httpd/modules/mod_access.so into
server: /etc/httpd/modules/mod_access.so: cannot open
shared object file: No such file or directory
I committed the line and the same thing happened on the next
Someone said that mod_access.so does not exist from FC5 on
so why is this in the conf file if that is correct?
I don't know what else to check to get httpd to start.
Any help will be appreciated,
I'm trying to upgrade a device driver from FC2 to FC5 and am running
into the problem shown below. This is on a hyperthreading P4 3GHz
running kernel 2.6.15-1.2054_FC5smp. It also happens using kernel
2.6.16-1.2096_FC5smp. There are 16 devices in the machine. For each
there is a fgBT878 process, running at the max SCHED_FIFO
priority. If I reduce the number of devices to 1 or 2, the problem
doesn't appear to happen (i.e., with 16 devices the panic happens
pretty much straight away, with 1 or 2 devices I have run for an
hour). I have no problems with a non-SMP kernel.
What sort of errors should I be looking for in my driver code?
[root@d915 ~]# ok
BUG: spinlock wrong CPU on CPU#1, fgBT878/1849 (Not tainted)
lock: d01b7ef0, .magic: dead4ead, .owner: fgBT878/1849, .owner_cpu: 0
[<c01d6501>] spin_bug+0x87/0xe9 [<c01d65ba>] _raw_spin_unlock+0x57/0x6c
[<c02f2232>] _spin_unlock_irqrestore+0x8/0xc [<d01b0ab0>] bttv_do_ioctl+0x3d7/0x74e [bt878_c]
[<c011d6a9>] activate_task+0x9d/0xaa [<c011da09>] try_to_wake_up+0x353/0x35d
[<d01aa34d>] video_usercopy+0x119/0x18d [videodev] [<c011c78f>] __wake_up_common+0x2f/0x53
[<c02f2156>] __down+0xce/0x107 [<c0136bb7>] hrtimer_cancel+0xa/0x10
[<c02f1b37>] schedule_hrtimer+0x33/0x6e [<c011da13>] default_wake_function+0x0/0xc
[<d01b06d6>] bttv_ioctl+0xe/0x11 [bt878_c] [<d01b06d9>] bttv_do_ioctl+0x0/0x74e [bt878_c]
[<c01717c3>] do_ioctl+0x47/0x5d [<c0171a23>] vfs_ioctl+0x24a/0x25c
[<c0171a7d>] sys_ioctl+0x48/0x5f [<c0103d25>] sysenter_past_esp+0x56/0x79
Kernel panic - not syncing: bad locking
[<c01234b6>] panic+0x3e/0x174 [<c01d6524>] spin_bug+0xaa/0xe9
[<c01d65ba>] _raw_spin_unlock+0x57/0x6c [<c02f2232>] _spin_unlock_irqrestore+0x8/0xc
[<d01b0ab0>] bttv_do_ioctl+0x3d7/0x74e [bt878_c] [<c011d6a9>] activate_task+0x9d/0xaa
[<c011da09>] try_to_wake_up+0x353/0x35d [<d01aa34d>] video_usercopy+0x119/0x18d [videodev]
[<c011c78f>] __wake_up_common+0x2f/0x53 [<c02f2156>] __down+0xce/0x107
[<c0136bb7>] hrtimer_cancel+0xa/0x10 [<c02f1b37>] schedule_hrtimer+0x33/0x6e
[<c011da13>] default_wake_function+0x0/0xc [<d01b06d6>] bttv_ioctl+0xe/0x11 [bt878_c]
[<d01b06d9>] bttv_do_ioctl+0x0/0x74e [bt878_c] [<c01717c3>] do_ioctl+0x47/0x5d
[<c0171a23>] vfs_ioctl+0x24a/0x25c [<c0171a7d>] sys_ioctl+0x48/0x5f
<0>BUG: spinlock lockup on CPU#0, swapper/0, d01b7ef0 (Not tainted)
[<d01b0263>] bttv_irq+0x36d/0x42e [bt878_c] [<c01456fe>] handle_IRQ_event+0x23/0x4c
[<c01457b4>] __do_IRQ+0x8d/0xdd [<c0105e8e>] do_IRQ+0x60/0x7b
[<c010474e>] common_interrupt+0x1a/0x20 [<c0102f2e>] mwait_idle+0x1f/0x33
[<c0102ef6>] cpu_idle+0x8f/0xa8 [<c03c8715>] start_kernel+0x2fe/0x304
When I ran "yum update", when it started to install the updates it
said something like cpu 0 overheating cpu 1 overheating. Then my
screen went black for a second and the next thing I new is I was at
the login screen.
Having problems like this in Linux is unacceptable. That could have
caused major damage. Things like this need to be worked out. Linux
needs to focus more on the here and now and not keep pushing for the
Don't get me wrong I think Linux is a gem. I like the GPL but I don't
like how company's can use people's software and make profit. The
people that make the software should be getting paid if anyone is
Once again, things like this are unacceptable. I am afraid to use
Fedora 6 now. I alos, have am having problems after a clean
Can somebody tell me how is created this device?
When I'm connecting my webcam, nothing happends but in messages.log:
kernel: usb 4-1.4: USB disconnect, address 3
kernel: usb 4-1.4: new full speed USB device using uhci_hcd and address 4
kernel: usb 4-1.4: not running at top speed; connect to a high speed hub
kernel: usb 4-1.4: configuration #1 chosen from 1 choice
kernel: 4:3:1: cannot set freq 0 to ep 0x86
kernel: 4:3:2: cannot set freq 0 to ep 0x86
When I load the module ("modprobe gspca"), new in messages.log:
kernel: usbcore: registered new driver gspca
kernel: /var/tmp/bach-build/BUILD/gspcav1-20060925/gspca_core.c: gspca driver
And always no /dev/video0
I create it ("mknod /dev/video0 c 81 0; chmod go+wr /dev/video0"), verify
[root@lns-bzn-59-82-252-142-2 ~]# ls -l /dev/video0
crw-rw-rw- 1 root root 81, 0 nov 16 01:45 /dev/video0
and run an application
[root@lns-bzn-59-82-252-142-2 ~]# xawtv
This is xawtv-3.95, running on Linux/i686 (2.6.18-1.2239.fc5)
WARNING: v4l-conf is compiled without DGA support.
can't open /dev/video0: No such device
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: Aucun périphérique de ce type
v4l2: open /dev/video0: Aucun périphérique de ce type
v4l: open /dev/video0: Aucun périphérique de ce type
no video grabber device available
Where is the problem?
I'm loosing my hair...
Les pages de manuel Linux en français
After logging into X (KDE) I start x0vncserver. I tried several options
(-display=:0) but none seem to resolve my issue. From a remote (or the
local system) I try to connect to the server using vncviewer hostname:0, I
get Connection refused. I can telnet hostname 5998 and get a responce. I
have googled around and found nothing. I am missing something just not sure
what? How do I connect to a VNC server?
I am finding I can not connect to any VNC session (not even :1 after
starting it) yet I can telnet to the port. Any input would be greatly
Azureus crashes with the following message:
changeLocale: *Default Language* != English (United States). Searching
changeLocale: Searching for language English in *any* country..
changeLocale: no message properties for Locale 'English (United
States)' (en_US), using 'English (default)'
# An unexpected error has been detected by HotSpot Virtual Machine:
# Internal Error (53484152454432554E54494D450E43505001A3), pid=3248,
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode, sharing)
# An error report file with more information is saved as hs_err_pid3248.log
# If you would like to submit a bug report, please visit:
/usr/bin/azureus: line 18: 3248 Aborted
jakarta-commons-cli log4j gtk2.8
-Dazureus.install.path=$APPDIR org.gudy.azureus2.ui.swt.Main "$@"
Thanks in advance,
I am seeing the message
deneb spamd: prefork: child states: II
deneb spamd: auto-whitelist: open of auto-whitelist file failed:
auto-whitelist: cannot open auto_whitelist_path
/home/reg/.spamassassin/auto-whitelist: Inappropriate ioctl for device
in the second case, the file /home/reg/.spamassassin/auto-whitelist exists,
writable by everyone (666) and owned by me user/group. [ it was 644 but I
666 might help, id didnt]