users February 2009

users@lists.fedoraproject.org

428 participants
591 discussions

network manager - blacklist
by Genes MailLists 23 Feb '09

23 Feb '09

Is there any blacklisting capability coming in NM ? Specifically i'd like to blacklist based on MAC address - it may also be helpful to blacklist based on SSID as well which I see others have asked for. I have some rogue routers (broken configs) at work, on the right SSID but for whatever reason are unuseable - i'd like to be able to blacklist those ones by MAC address. My current solution is a pain - which is to whitelist the good ones .. which means I have a lot of entries for same ssid and different (ok) mac's. thanks.

1 0

updated iwl4965 firmware in F10
by Genes MailLists 23 Feb '09

23 Feb '09

There is a newer version of firmware available (228.57.2.23) - anyone know if there will be an update in F10 ? thanks. gene/

1 0

No .gnupg Directory On Fedora 10
by Robert L Cochran 23 Feb '09

23 Feb '09

I just noticed that I do not yet have a .gnupg directory on my Fedora 10 system. I haven't tried to create a gpg keyring on it yet. I want to migrate sensibly from a Fedora 7 system to a separate Fedora 10 system. Can I go ahead and copy the .gnupg directory from the old system to the new one? Or should I attempt to create a fresh .gnupg directory on the Fedora 10 system and selectively copy elements of the .gnupg directory from the old system? Thanks Bob Cochran Greenbelt, Maryland, USA

2 2

(no subject)
by Michael Pace 23 Feb '09

23 Feb '09

I am a newbie who is unsure as to which Linux devices I should start with.Can anyone help me with this. Is Fedora the latest on offer? Is it suitable for a beginner? Thanks for any help. Mike Pace Make Yahoo!7 your homepage and win a trip to the Quiksilver Pro. Find out more

5 4

Fedora 8 upgrade to 9 missing dependency problem
by Langdon Stevenson 23 Feb '09

23 Feb '09

I decided it was time to bite the bullet and upgrade my workstation to Fedora 9 from 8. I followed these instructions to upgrade using Yum: http://fedoraproject.org/wiki/YumUpgradeFaq However when I ran the command: yum upgrade I got a very long slew of "Missing Dependency" errors (see below). There are so many that I can't just uninstall all of the applications (might as well just do a clean install). Can anyone suggest how I can troubleshoot this and resolve the issue? I have found a few people had similar issues, but saw no solution suggested. Langdon 2:gimp-2.4.7-3.fc8.i386 from installed has depsolving problems --> Missing Dependency: libpoppler-glib.so.2 is needed by package 2:gimp-2.4.7-3.fc8.i386 (installed) wine-ldap-1.1.9-2.fc8.i386 from installed has depsolving problems --> Missing Dependency: libldap_r-2.3.so.0 is needed by package wine-ldap-1.1.9-2.fc8.i386 (installed) httpd-tools-2.2.9-1.fc8.i386 from installed has depsolving problems --> Missing Dependency: libssl.so.6 is needed by package httpd-tools-2.2.9-1.fc8.i386 (installed) <snip> Removed about 100+ lines of dependency errors ... Error: Missing Dependency: libcrypto.so.6 is needed by package php-mysql-5.2.6-2.fc8.i386 (installed) Error: Missing Dependency: libssl.so.6 is needed by package 6:kdebase-3.5.10-2.fc8.i386 (updates-newkey) Error: Missing Dependency: perl(:MODULE_COMPAT_5.8.8) is needed by package foomatic-3.0.2-67.fc8.i386 (installed) Error: Missing Dependency: libcrypto.so.6 is needed by package qt4-x11-4.4.3-1.fc8.i386 (installed) Error: Missing Dependency: libsilc-1.0.so.2 is needed by package libpurple-2.5.2-1.fc8.i386 (installed) Error: Missing Dependency: libldap-2.3.so.0 is needed by package 6:kdebase-3.5.10-2.fc8.i386 (updates-newkey)

4 6

Re: kubuntu vs fedora initrd init files
by Jackson Byers 23 Feb '09

23 Feb '09

Mikkel, one pure kubuntu on usb, no disk reordering. I believe this is kubuntu 6.06 dapper, but done via debootstrap methods, which i just followed recipe found on web in dec 2006. It was first working on scsi, but then copied to usb I had to revive it, bc my fc5copy files were in top dir on usb. I redid the kubu debootstrap on usb; first set up on usb on dec22 2006 first mv'd out the fc5copy files to /mvfc5 2nd mv'd back kubu debootstrap files into top dir of usb this booted fine, so my mv out and mv back no problems, and kubuntu is on sdc, no reordering of disks. This may well not be what you wanted bc of the special debootstrap stuff but it is a case that is "pure" kubuntu, on sdc1, no reordering (I also currently have kubuntu 6.06.1 LTS from Install/live CD, which I somehow managed to install on scsi, in sdb5, also in dec 2006 --it is an install, i am certainly not booting off of CD. It still boots from scsi sdb5. I was hoping to get this booting on usb, but so far it is failing, in part bc of some glitches in my backup tools.) here is data showing debootstrap version usb booting on sdc1 root@kubu:/# uname -a Linux kubu 2.6.15-26-386 #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006 i686 GNU/Linux root@kubu:/# I believe this kubuntu 6.06 dapper root@kubu:/mnt# df -kh Filesystem Size Used Avail Use% Mounted on /dev/sdc1 233G 14G 220G 6% / varrun 1014M 40K 1014M 1% /var/run varlock 1014M 4.0K 1014M 1% /var/lock udev 1014M 180K 1014M 1% /dev devshm 1014M 0 1014M 0% /dev/shm /dev/sda1 21G 6.5G 13G 34% /fc5hold tmpfs 1014M 0 1014M 0% /dev/shm /dev/sdb1 99M 23M 72M 24% /mnt/sdb1 root@kubu:/mnt# root@kubu:/# cat /proc/partitions major minor #blocks name 8 0 35843686 sda 8 1 21494938 sda1 8 2 3911827 sda2 8 3 10434217 sda3 8 16 35843686 sdb 8 17 104391 sdb1 8 18 2048287 sdb2 8 19 104422 sdb3 8 20 1 sdb4 8 21 8193118 sdb5 8 22 8193118 sdb6 8 23 17197551 sdb7 8 32 244198584 sdc 8 33 244196001 sdc1 253 0 21494938 dm-0 253 1 3911827 dm-1 253 2 10434217 dm-2 253 3 104391 dm-3 253 4 2048287 dm-4 253 5 104422 dm-5 253 6 8193118 dm-6 253 7 8193118 dm-7 253 8 17197551 dm-8 253 9 244196001 dm-9 cat /etc/fstab /dev/sdc1 / reiserfs defaults 0 0 /dev/sda1 /fc5hold ext3 defaults 1 2 devpts /dev/pts devpts gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs defaults 0 0 proc /proc proc defaults 0 0 sysfs /sys sysfs defaults 0 0 /dev/sda2 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0 from grub.conf : title kubuntu dapper usb debootstrap ### root (hd0,0) #### pick up kernel,initrd from sda1,works root (hd1,0) ### sdb1, only kubufiles cp from kubuinstall,works ### root (hd2,0) ### doesnt work kernel /boot/vmlinuz-2.6.15-26-386 ro root=/dev/sdc1 initrd /boot/initrd.img-2.6.15-26-386 So, is this useful as proof that kubuntu does not reorder usb to sda? or is this debootstrap business too tricky to say anything about a pure standard install? Jack

1 0

Linux users want better desktop performance (Screw data. Prioritize code)
by Valent Turkovic 23 Feb '09

23 Feb '09

http://rudd-o.com/en/linux-and-free-software/tales-from-responsivenessland-… What is you comment? -- http://kernelreloaded.blog385.com/ linux, blog, anime, spirituality, windsurf, wireless registered as user #367004 with the Linux Counter, http://counter.li.org. ICQ: 2125241, Skype: valent.turkovic

13 19

Upgraded to F10, (& Kjot disappeared)
by DB 23 Feb '09

23 Feb '09

Hi All, Well, I bit the bullet & used preupgrade to move my F9 to F10. The only "major" disappointment was that I had to start making space in various areas - which are separate partitions on my box - well into the process. IMHO, it would have been "nice" if preupgrade could have given a warning before starting that it would need big spaces in certain areas. According to the blurb, using preupgrade would mean that my system remained usable during the upgrade, but in my case - probably because I didn't make enough space available in /boot - it went through an install cycle of some 450 packages, followed by an update cycle of some 800 packages.... some 3 hours worth of very unusable system (at least I could read a book while it was worgling away ;-) . So I now seem to have a working F10 system, so far, I've not discovered anything major to moan about. However, I had just started using Kjot under F9, which seemed to be a useful gubbins..... and now in F10 it seems to have vanished. Anyone know where kjot might be hidden (or how I can get the old version back into service)?? Thanks all Dave

3 2

Domino on Fedora
by Tom Van Looy 23 Feb '09

23 Feb '09

Hi We are installing Domino on Fedora (9). The (IBM and Redhat) manuals tell you to disable sendmail and remove it from the runlevels. Great! But, ... that breaks all the housekeeping stuff right? How do we need to configure things to make sure the mail command, cron, logwatch, etc. keep working? Anyone here running Domino on Fedora? Kind regards, Tom Van Looy

5 10

Dvico Dual 4 DVB tuner - refusing to work since new year
by Da Rock 23 Feb '09

23 Feb '09

I picked up 2 of these cards because I read up on them at linuxtv.org, and found them to be supported reasonably well. Installed them and got them going before the end of the year. Around the time of the new year coming in, some updates occurred and I lost them again. ls /dev/dvb showed on the one adapter when there should have been 5 (leadtek hybrid is also installed). I tried reinstalling drivers from linuxtv mercurial sources, but after 3 attempts and several kernel updates its a no go. I can run modprobe and load the modules, lsmod shows them there and loaded, but after reboot (which is the only way to get them working once modules have been loaded- they're dual tuners running off a usb controller on the board; obviously I have no way of unplugging and replugging in as usb) they're gone again. This is (was) a fresh install of F10 when I first got them working, but since updates forget it. Any help here guys? > Linux xxxxxx.xxx.xx 2.6.27.12-170.2.5.fc10.x86_64 #1 SMP Wed Jan 21 01:33:24 EST 2009 x86_64 x86_64 x86_64 GNU/Linux > > lsmod > Module Size Used by > bridge 56224 0 > stp 10756 1 bridge > bnep 22016 2 > sco 19204 2 > l2cap 28544 3 bnep > bluetooth 60068 5 bnep,sco,l2cap > sunrpc 191208 3 > ip6t_REJECT 12160 2 > nf_conntrack_ipv6 22984 5 > ip6table_filter 11136 1 > ip6_tables 26128 1 ip6table_filter > ipv6 287272 32 ip6t_REJECT,nf_conntrack_ipv6 > cpufreq_ondemand 15504 4 > powernow_k8 24836 0 > freq_table 12928 2 cpufreq_ondemand,powernow_k8 > dm_multipath 23704 0 > uinput 16128 0 > cx22702 14212 1 > cx88_dvb 25604 0 > cx88_vp3054_i2c 10880 1 cx88_dvb > videobuf_dvb 13316 1 cx88_dvb > dvb_core 84252 2 cx88_dvb,videobuf_dvb > tuner_simple 20756 2 > tuner_types 25472 1 tuner_simple > tda9887 18564 1 > tda8290 18820 0 > tuner 31820 0 > snd_seq_dummy 11396 0 > snd_hda_intel 478752 0 > cx8802 23684 1 cx88_dvb > snd_seq_oss 39104 0 > cx8800 40548 0 > cx88_alsa 20488 0 > snd_seq_midi_event 14848 1 snd_seq_oss > cx88xx 74920 4 cx88_dvb,cx8802,cx8800,cx88_alsa > snd_seq 61968 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event > snd_seq_device 15380 3 snd_seq_dummy,snd_seq_oss,snd_seq > snd_pcm_oss 52224 0 > snd_mixer_oss 23168 1 snd_pcm_oss > snd_pcm 85512 3 snd_hda_intel,cx88_alsa,snd_pcm_oss > ir_common 45060 1 cx88xx > snd_timer 30352 2 snd_seq,snd_pcm > i2c_algo_bit 13956 2 cx88_vp3054_i2c,cx88xx > compat_ioctl32 16512 1 cx8800 > videodev 40704 4 tuner,cx8800,cx88xx,compat_ioctl32 > v4l1_compat 21380 1 videodev > v4l2_common 18560 2 tuner,cx8800 > tveeprom 21508 1 cx88xx > i2c_core 29216 10 cx22702,cx88_vp3054_i2c,tuner_simple,tda9887,tda8290,tuner,cx88xx,i2c_algo_bit,v4l2_common,tveeprom > btcx_risc 12296 4 cx8802,cx8800,cx88_alsa,cx88xx > videobuf_dma_sg 19972 5 cx88_dvb,cx8802,cx8800,cx88_alsa,cx88xx > pcspkr 11008 0 > floppy 66216 0 > videobuf_core 24836 5 videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg > firewire_ohci 30468 0 > snd_page_alloc 16656 2 snd_hda_intel,snd_pcm > serio_raw 14084 0 > firewire_core 45504 1 firewire_ohci > snd_hwdep 16392 1 snd_hda_intel > crc_itu_t 10240 1 firewire_core > snd 68984 11 snd_seq_dummy,snd_hda_intel,snd_seq_oss,cx88_alsa,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep > soundcore 14992 1 snd > forcedeth 61840 0 > pata_amd 21252 0 > joydev 19328 0 > wmi 14912 0 > usb_storage 109216 0 > ata_generic 13956 0 > pata_acpi 13056 0 > > > Some of dmesg: > > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x0007fee0 > On node 0 totalpages: 523887 > DMA zone: 1729 pages, LIFO batch:0 > DMA32 zone: 512795 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > ACPI: IRQ14 used by override. > Setting APIC routing to flat > ACPI: HPET id: 0x10de8201 base: 0xfeff0000 > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 4 CPUs, 0 hotplug CPUs > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 > PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 > Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000) > PERCPU: Allocating 65184 bytes of per cpu data > NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 > Built 1 zonelists in Node order, mobility grouping on. Total pages: 514524 > Policy zone: DMA32 > Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Extended CMOS year: 2000 > TSC: PIT calibration confirmed by PMTIMER. > TSC: using PIT calibration value > Detected 2199.934 MHz processor. > spurious 8259A interrupt: IRQ7. > Console: colour VGA+ 80x25 > console [tty0] enabled > Checking aperture... > No AGP bridge found > Node 0: aperture @ dc8000000 size 32 MB > Aperture beyond 4GB. Ignoring. > Memory: 2054096k/2096000k available (3305k kernel code, 41452k reserved, 1837k data, 1292k init) > CPA: page pool initialized 1 of 1 pages preallocated > SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.86 BogoMIPS (lpj=2199931) > Security Framework initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) > Mount-cache hash table entries: 256 > Initializing cgroup subsys ns > Initializing cgroup subsys cpuacct > Initializing cgroup subsys devices > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 0/0 -> Node 0 > tseg: 007ff00000 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > using C1E aware idle routine > ACPI: Core revision 20080609 > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 > Using local APIC timer interrupts. > APIC timer calibration result 12499617 > Detected 12.499 MHz APIC timer. > Booting processor 1/1 ip 6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4400.13 BogoMIPS (lpj=2200069) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 1/1 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > System has AMD C1E enabled > Switch to broadcast mode on CPU1 > Booting processor 2/2 ip 6000 > Initializing CPU#2 > Calibrating delay using timer specific routine.. 4400.02 BogoMIPS (lpj=2200014) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 2/2 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 2 > x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 > CPU2: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 > checking TSC synchronization [CPU#0 -> CPU#2]: passed. > Switch to broadcast mode on CPU2 > Booting processor 3/3 ip 6000 > Initializing CPU#3 > Calibrating delay using timer specific routine.. 4400.08 BogoMIPS (lpj=2200040) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 3/3 -> Node 0 > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 3 > x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 > CPU3: AMD Phenom(tm) 9550 Quad-Core Processor stepping 03 > checking TSC synchronization [CPU#0 -> CPU#3]: passed. > Brought up 4 CPUs > Total of 4 processors activated (17600.10 BogoMIPS). > Switch to broadcast mode on CPU3 > sizeof(vma)=176 bytes > sizeof(page)=56 bytes > sizeof(inode)=560 bytes > sizeof(dentry)=208 bytes > sizeof(ext3inode)=760 bytes > sizeof(buffer_head)=104 bytes > sizeof(skbuff)=232 bytes > sizeof(task_struct)=5904 bytes > CPU0 attaching sched-domain: > domain 0: span 0-3 level CPU > groups: 0 1 2 3 > domain 1: span 0-3 level NODE > groups: 0-3 > CPU1 attaching sched-domain: > domain 0: span 0-3 level CPU > groups: 1 2 3 0 > domain 1: span 0-3 level NODE > groups: 0-3 > CPU2 attaching sched-domain: > domain 0: span 0-3 level CPU > groups: 2 3 0 1 > domain 1: span 0-3 level NODE > groups: 0-3 > CPU3 attaching sched-domain: > domain 0: span 0-3 level CPU > groups: 3 0 1 2 > domain 1: span 0-3 level NODE > groups: 0-3 > Switch to broadcast mode on CPU0 > net_namespace: 1552 bytes > Booting paravirtualized kernel on bare hardware > Time: 20:54:14 Date: 02/19/09 > NET: Registered protocol family 16 > No dock devices found. > node 0 link 0: io port [a000, ffff] > TOM: 0000000080000000 aka 2048M > Fam 10h mmconf [f0000000, f00fffff] > node 0 link 0: mmio [a0000, bffff] > node 0 link 0: mmio [80000000, efffffff] > node 0 link 0: mmio [f4000000, fe02ffff] > node 0 link 0: mmio [f0000000, f05fffff] ==> [f0100000, f05fffff] > bus: [00,05] on node 0 link 0 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [a0000, bffff] > bus: 00 index 2 mmio: [80000000, efffffff] > bus: 00 index 3 mmio: [f0600000, fcffffffff] > bus: 00 index 4 mmio: [f0100000, f05fffff] > ACPI: bus type pci registered > PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 > PCI: MCFG area at f0000000 reserved in E820 > PCI: Using MMCONFIG at f0000000 - f3ffffff > PCI: Using configuration type 1 for base access > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: 0000:00:01.1 reg 10 io port: [ff00, ff3f] > PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] > PCI: 0000:00:01.1 reg 24 io port: [1c40, 1c7f] > pci 0000:00:01.1: PME# supported from D3hot D3cold > pci 0000:00:01.1: PME# disabled > PCI: 0000:00:01.3 reg 10 32bit mmio: [fdf80000, fdffffff] > PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff] > pci 0000:00:02.0: supports D1 > pci 0000:00:02.0: supports D2 > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.0: PME# disabled > PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff] > pci 0000:00:02.1: supports D1 > pci 0000:00:02.1: supports D2 > pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.1: PME# disabled > PCI: 0000:00:04.0 reg 10 32bit mmio: [fe02d000, fe02dfff] > pci 0000:00:04.0: supports D1 > pci 0000:00:04.0: supports D2 > pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:04.0: PME# disabled > PCI: 0000:00:04.1 reg 10 32bit mmio: [fe02c000, fe02c0ff] > pci 0000:00:04.1: supports D1 > pci 0000:00:04.1: supports D2 > pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:04.1: PME# disabled > PCI: 0000:00:06.0 reg 20 io port: [fc00, fc0f] > PCI: 0000:00:07.0 reg 10 32bit mmio: [fe020000, fe023fff] > pci 0000:00:07.0: PME# supported from D3hot D3cold > pci 0000:00:07.0: PME# disabled > PCI: 0000:00:09.0 reg 10 io port: [9f0, 9f7] > PCI: 0000:00:09.0 reg 14 io port: [bf0, bf3] > PCI: 0000:00:09.0 reg 18 io port: [970, 977] > PCI: 0000:00:09.0 reg 1c io port: [b70, b73] > PCI: 0000:00:09.0 reg 20 io port: [f700, f70f] > PCI: 0000:00:09.0 reg 24 32bit mmio: [fe026000, fe027fff] > PCI: 0000:00:0a.0 reg 10 32bit mmio: [fe02b000, fe02bfff] > PCI: 0000:00:0a.0 reg 14 io port: [f600, f607] > PCI: 0000:00:0a.0 reg 18 32bit mmio: [fe02a000, fe02a0ff] > PCI: 0000:00:0a.0 reg 1c 32bit mmio: [fe029000, fe02900f] > pci 0000:00:0a.0: supports D1 > pci 0000:00:0a.0: supports D2 > pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0a.0: PME# disabled > pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:10.0: PME# disabled > pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:12.0: PME# disabled > pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:13.0: PME# disabled > pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:14.0: PME# disabled > PCI: 0000:01:08.0 reg 20 io port: [ec00, ec1f] > pci 0000:01:08.0: supports D1 > pci 0000:01:08.0: supports D2 > pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:08.0: PME# disabled > PCI: 0000:01:08.1 reg 20 io port: [e800, e81f] > pci 0000:01:08.1: supports D1 > pci 0000:01:08.1: supports D2 > pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:08.1: PME# disabled > PCI: 0000:01:08.2 reg 10 32bit mmio: [fcfff000, fcfff0ff] > pci 0000:01:08.2: supports D1 > pci 0000:01:08.2: supports D2 > pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:08.2: PME# disabled > PCI: 0000:01:09.0 reg 20 io port: [e400, e41f] > pci 0000:01:09.0: supports D1 > pci 0000:01:09.0: supports D2 > pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:09.0: PME# disabled > PCI: 0000:01:09.1 reg 20 io port: [e000, e01f] > pci 0000:01:09.1: supports D1 > pci 0000:01:09.1: supports D2 > pci 0000:01:09.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:09.1: PME# disabled > PCI: 0000:01:09.2 reg 10 32bit mmio: [fcffe000, fcffe0ff] > pci 0000:01:09.2: supports D1 > pci 0000:01:09.2: supports D2 > pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:09.2: PME# disabled > PCI: 0000:01:0a.0 reg 10 32bit mmio: [fcffd000, fcffdfff] > pci 0000:01:0a.0: supports D1 > pci 0000:01:0a.0: supports D2 > pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot > pci 0000:01:0a.0: PME# disabled > PCI: 0000:01:0b.0 reg 10 32bit mmio: [fb000000, fbffffff] > PCI: 0000:01:0b.1 reg 10 32bit mmio: [fa000000, faffffff] > PCI: 0000:01:0b.2 reg 10 32bit mmio: [f9000000, f9ffffff] > pci 0000:00:08.0: transparent bridge > PCI: bridge 0000:00:08.0 io port: [e000, efff] > PCI: bridge 0000:00:08.0 32bit mmio: [f9000000, fcffffff] > PCI: bridge 0000:00:08.0 32bit mmio pref: [fde00000, fdefffff] > PCI: 0000:02:00.0 reg 10 64bit mmio: [e0000000, efffffff] > PCI: 0000:02:00.0 reg 18 64bit mmio: [fdde0000, fddeffff] > PCI: 0000:02:00.0 reg 20 io port: [dc00, dcff] > PCI: 0000:02:00.0 reg 30 32bit mmio: [fddc0000, fdddffff] > pci 0000:02:00.0: supports D1 > pci 0000:02:00.0: supports D2 > PCI: 0000:02:00.1 reg 10 64bit mmio: [fddfc000, fddfffff] > pci 0000:02:00.1: supports D1 > pci 0000:02:00.1: supports D2 > PCI: bridge 0000:00:10.0 io port: [d000, dfff] > PCI: bridge 0000:00:10.0 32bit mmio: [fdd00000, fddfffff] > PCI: bridge 0000:00:10.0 64bit mmio pref: [e0000000, efffffff] > PCI: bridge 0000:00:12.0 io port: [c000, cfff] > PCI: bridge 0000:00:12.0 32bit mmio: [fdc00000, fdcfffff] > PCI: bridge 0000:00:12.0 64bit mmio pref: [fdb00000, fdbfffff] > PCI: bridge 0000:00:13.0 io port: [b000, bfff] > PCI: bridge 0000:00:13.0 32bit mmio: [fda00000, fdafffff] > PCI: bridge 0000:00:13.0 64bit mmio pref: [fd900000, fd9fffff] > PCI: bridge 0000:00:14.0 io port: [a000, afff] > PCI: bridge 0000:00:14.0 32bit mmio: [fd800000, fd8fffff] > PCI: bridge 0000:00:14.0 64bit mmio pref: [fd700000, fd7fffff] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LE0A] (IRQs *5 7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15) > ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) > ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) > ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) > ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. > ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. > ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 > ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0 > ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0 > ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0 > ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0 > ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0 > ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled. > ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 > ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 12 devices > ACPI: ACPI bus type pnp unregistered > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 > hpet0: 3 32-bit timers, 25000000 Hz > Switched to high resolution mode on CPU 0 > Switched to high resolution mode on CPU 3 > Switched to high resolution mode on CPU 2 > Switched to high resolution mode on CPU 1 > tracer: 1286 pages allocated for 65536 entries of 80 bytes > actual entries 65586 > ACPI: RTC can wake from S4 > system 00:01: ioport range 0x1000-0x107f has been reserved > system 00:01: ioport range 0x1080-0x10ff has been reserved > system 00:01: ioport range 0x1400-0x147f has been reserved > system 00:01: ioport range 0x1480-0x14ff has been reserved > system 00:01: ioport range 0x1800-0x187f has been reserved > system 00:01: ioport range 0x1880-0x18ff has been reserved > system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved > system 00:02: ioport range 0x4d0-0x4d1 has been reserved > system 00:02: ioport range 0x800-0x87f has been reserved > system 00:02: ioport range 0x290-0x297 has been reserved > system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved > system 00:0b: iomem range 0xcfa00-0xcffff has been reserved > system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved > system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved > system 00:0b: iomem range 0xfc000-0xfffff could not be reserved > system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved > system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved > system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved > system 00:0b: iomem range 0x0-0x9ffff could not be reserved > system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved > system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved > system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved > system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved > system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved > system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved > system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved > pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:08.0: IO window: 0xe000-0xefff > pci 0000:00:08.0: MEM window: 0xf9000000-0xfcffffff > pci 0000:00:08.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff > pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:10.0: IO window: 0xd000-0xdfff > pci 0000:00:10.0: MEM window: 0xfdd00000-0xfddfffff > pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000efffffff > pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 > pci 0000:00:12.0: IO window: 0xc000-0xcfff > pci 0000:00:12.0: MEM window: 0xfdc00000-0xfdcfffff > pci 0000:00:12.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff > pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 > pci 0000:00:13.0: IO window: 0xb000-0xbfff > pci 0000:00:13.0: MEM window: 0xfda00000-0xfdafffff > pci 0000:00:13.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff > pci 0000:00:14.0: PCI bridge, secondary bus 0000:05 > pci 0000:00:14.0: IO window: 0xa000-0xafff > pci 0000:00:14.0: MEM window: 0xfd800000-0xfd8fffff > pci 0000:00:14.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff > pci 0000:00:08.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16 > pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:10.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16 > pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:12.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16 > pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:13.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16 > pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:14.0: setting latency timer to 64 > bus: 00 index 0 io port: [0, ffff] > bus: 00 index 1 mmio: [0, ffffffffffffffff] > bus: 01 index 0 io port: [e000, efff] > bus: 01 index 1 mmio: [f9000000, fcffffff] > bus: 01 index 2 mmio: [fde00000, fdefffff] > bus: 01 index 3 io port: [0, ffff] > bus: 01 index 4 mmio: [0, ffffffffffffffff] > bus: 02 index 0 io port: [d000, dfff] > bus: 02 index 1 mmio: [fdd00000, fddfffff] > bus: 02 index 2 mmio: [e0000000, efffffff] > bus: 02 index 3 mmio: [0, 0] > bus: 03 index 0 io port: [c000, cfff] > bus: 03 index 1 mmio: [fdc00000, fdcfffff] > bus: 03 index 2 mmio: [fdb00000, fdbfffff] > bus: 03 index 3 mmio: [0, 0] > bus: 04 index 0 io port: [b000, bfff] > bus: 04 index 1 mmio: [fda00000, fdafffff] > bus: 04 index 2 mmio: [fd900000, fd9fffff] > bus: 04 index 3 mmio: [0, 0] > bus: 05 index 0 io port: [a000, afff] > bus: 05 index 1 mmio: [fd800000, fd8fffff] > bus: 05 index 2 mmio: [fd700000, fd7fffff] > bus: 05 index 3 mmio: [0, 0] > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 7, 524288 bytes) > TCP established hash table entries: 262144 (order: 10, 4194304 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > checking if image is initramfs... it is > Freeing initrd memory: 3853k freed > audit: initializing netlink socket (disabled) > type=2000 audit(1235076853.832:1): initialized > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > msgmni has been set to 4019 > SELinux: Registering netfilter hooks > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:00:07.0: Enabling HT MSI Mapping > pci 0000:00:08.0: Enabling HT MSI Mapping > pci 0000:00:09.0: Enabling HT MSI Mapping > pci 0000:00:0a.0: Enabling HT MSI Mapping > pci 0000:00:10.0: Enabling HT MSI Mapping > pci 0000:00:12.0: Enabling HT MSI Mapping > pci 0000:00:13.0: Enabling HT MSI Mapping > pci 0000:00:14.0: Enabling HT MSI Mapping > pci 0000:02:00.0: Boot video device > pcieport-driver 0000:00:10.0: setting latency timer to 64 > pcieport-driver 0000:00:10.0: found MSI capability > pci_express 0000:00:10.0:pcie00: allocate port service > pcieport-driver 0000:00:12.0: setting latency timer to 64 > pcieport-driver 0000:00:12.0: found MSI capability > pci_express 0000:00:12.0:pcie00: allocate port service > pcieport-driver 0000:00:13.0: setting latency timer to 64 > pcieport-driver 0000:00:13.0: found MSI capability > pci_express 0000:00:13.0:pcie00: allocate port service > pcieport-driver 0000:00:14.0: setting latency timer to 64 > pcieport-driver 0000:00:14.0: found MSI capability > pci_express 0000:00:14.0:pcie00: allocate port service > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 > ACPI: Power Button (CM) [PWRB] > fan PNP0C0B:00: registered as cooling_device0 > ACPI: Fan [FAN] (on) > processor ACPI0007:00: registered as cooling_device1 > processor ACPI0007:01: registered as cooling_device2 > processor ACPI0007:02: registered as cooling_device3 > processor ACPI0007:03: registered as cooling_device4 > ACPI: Expecting a [Reference] package element, found type 0 > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (40 C) > hpet_resources: 0xfeff0000 is busy > Non-volatile memory driver v1.2 > Linux agpgart interface v0.103 > Serial: 8250/16550 driver4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > brd: module loaded > loop: module loaded > input: Macintosh mouse button emulation as /devices/virtual/input/input2 > Driver 'sd' needs updating - please use bus_type methods > Driver 'sr' needs updating - please use bus_type methods > ahci 0000:00:09.0: version 3.0 > ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 > ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 > ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode > ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio > ahci 0000:00:09.0: setting latency timer to 64 > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > ata1: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 23 > ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 23 > ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 23 > ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 23 > ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 23 > ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 23 > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-8: ST31500341AS, SD17, max UDMA/133 > ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (not used) > ata1.00: WARNING: device requires firmware update to be fully functional. > ata1.00: contact the vendor or visit http://ata.wiki.kernel.org. > ata1.00: configured for UDMA/133 > ata2: SATA link down (SStatus 0 SControl 300) > ata3: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > ata5: SATA link down (SStatus 0 SControl 300) > ata6: SATA link down (SStatus 0 SControl 300) > scsi 0:0:0:0: Direct-Access ATA ST31500341AS SD17 PQ: 0 ANSI: 5 > sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 > sd 0:0:0:0: [sda] Attached SCSI disk > sd 0:0:0:0: Attached scsi generic sg0 type 0 > ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22 > ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22 > ehci_hcd 0000:00:02.1: setting latency timer to 64 > ehci_hcd 0000:00:02.1: EHCI Host Controller > ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:02.1: debug port 1 > ehci_hcd 0000:00:02.1: cache line size of 64 is not supported > ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 > ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 6 ports detected > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 ehci_hcd > usb usb1: SerialNumber: 0000:00:02.1 > ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug > ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 21 > ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 21 (level, low) -> IRQ 21 > ehci_hcd 0000:00:04.1: setting latency timer to 64 > ehci_hcd 0000:00:04.1: EHCI Host Controller > ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:04.1: debug port 1 > ehci_hcd 0000:00:04.1: cache line size of 64 is not supported > ehci_hcd 0000:00:04.1: irq 21, io mem 0xfe02c000 > usb 1-5: new high speed USB device using ehci_hcd and address 2 > ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > hub 1-0:1.0: unable to enumerate USB device on port 5 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 ehci_hcd > usb usb2: SerialNumber: 0000:00:04.1 > ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 > ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:01:08.2: EHCI Host Controller > ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 3 > ehci_hcd 0000:01:08.2: irq 18, io mem 0xfcfff000 > ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 4 ports detected > usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: EHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 ehci_hcd > usb usb3: SerialNumber: 0000:01:08.2 > ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 > ehci_hcd 0000:01:09.2: PCI INT C -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 > ehci_hcd 0000:01:09.2: EHCI Host Controller > ehci_hcd 0000:01:09.2: new USB bus registered, assigned bus number 4 > ehci_hcd 0000:01:09.2: irq 19, io mem 0xfcffe000 > usb 3-1: new high speed USB device using ehci_hcd and address 2 > ehci_hcd 0000:01:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 4 ports detected > usb 3-1: configuration #1 chosen from 1 choice > usb 3-1: New USB device found, idVendor=0fe9, idProduct=db98 > usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4 > usb 3-1: Product: Bluebird > usb 3-1: Manufacturer: Dvico > usb 3-1: SerialNumber: 0000802d > usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: EHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 ehci_hcd > usb usb4: SerialNumber: 0000:01:09.2 > ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver > ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 20 > ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 20 (level, low) -> IRQ 20 > ohci_hcd 0000:00:02.0: setting latency timer to 64 > ohci_hcd 0000:00:02.0: OHCI Host Controller > ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5 > ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000 > usb 3-2: new high speed USB device using ehci_hcd and address 3 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 6 ports detected > usb 3-2: configuration #1 chosen from 1 choice > usb 3-2: New USB device found, idVendor=0fe9, idProduct=db98 > usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4 > usb 3-2: Product: Bluebird > usb 3-2: Manufacturer: Dvico > usb 3-2: SerialNumber: 0000002d > usb 4-1: new high speed USB device using ehci_hcd and address 2 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: OHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 ohci_hcd > usb usb5: SerialNumber: 0000:00:02.0 > ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 23 > ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 23 (level, low) -> IRQ 23 > ohci_hcd 0000:00:04.0: setting latency timer to 64 > ohci_hcd 0000:00:04.0: OHCI Host Controller > ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 6 > ohci_hcd 0000:00:04.0: irq 23, io mem 0xfe02d000 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 6 ports detected > usb 4-1: configuration #1 chosen from 1 choice > usb 4-1: New USB device found, idVendor=0fe9, idProduct=db98 > usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4 > usb 4-1: Product: Bluebird > usb 4-1: Manufacturer: Dvico > usb 4-1: SerialNumber: 0000003d > usb 4-2: new high speed USB device using ehci_hcd and address 3 > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: OHCI Host Controller > usb usb6: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 ohci_hcd > usb usb6: SerialNumber: 0000:00:04.0 > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > uhci_hcd 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:01:08.0: UHCI Host Controller > uhci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:01:08.0: irq 16, io base 0x0000ec00 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > usb 4-2: configuration #1 chosen from 1 choice > usb 4-2: New USB device found, idVendor=0fe9, idProduct=db98 > usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=4 > usb 4-2: Product: Bluebird > usb 4-2: Manufacturer: Dvico > usb 4-2: SerialNumber: 0000003e > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: UHCI Host Controller > usb usb7: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 uhci_hcd > usb usb7: SerialNumber: 0000:01:08.0 > ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 > uhci_hcd 0000:01:08.1: PCI INT B -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 > uhci_hcd 0000:01:08.1: UHCI Host Controller > uhci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 8 > uhci_hcd 0000:01:08.1: irq 17, io base 0x0000e800 > usb usb8: configuration #1 chosen from 1 choice > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > usb 5-5: new full speed USB device using ohci_hcd and address 2 > usb 5-5: not running at top speed; connect to a high speed hub > usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb8: Product: UHCI Host Controller > usb usb8: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 uhci_hcd > usb usb8: SerialNumber: 0000:01:08.1 > uhci_hcd 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 > uhci_hcd 0000:01:09.0: UHCI Host Controller > uhci_hcd 0000:01:09.0: new USB bus registered, assigned bus number 9 > uhci_hcd 0000:01:09.0: irq 17, io base 0x0000e400 > usb usb9: configuration #1 chosen from 1 choice > hub 9-0:1.0: USB hub found > hub 9-0:1.0: 2 ports detected > usb 5-5: configuration #1 chosen from 1 choice > usb 5-5: New USB device found, idVendor=0aec, idProduct=3260 > usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > usb 5-5: Product: USB Storage Device > usb 5-5: Manufacturer: GENERIC > usb 5-5: SerialNumber: 200512071558289LD > usb 6-2: new low speed USB device using ohci_hcd and address 2 > usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb9: Product: UHCI Host Controller > usb usb9: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 uhci_hcd > usb usb9: SerialNumber: 0000:01:09.0 > uhci_hcd 0000:01:09.1: PCI INT B -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:01:09.1: UHCI Host Controller > uhci_hcd 0000:01:09.1: new USB bus registered, assigned bus number 10 > uhci_hcd 0000:01:09.1: irq 18, io base 0x0000e000 > usb usb10: configuration #1 chosen from 1 choice > hub 10-0:1.0: USB hub found > hub 10-0:1.0: 2 ports detected > usb 6-2: configuration #1 chosen from 1 choice > usb 6-2: New USB device found, idVendor=1241, idProduct=f761 > usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 6-2: Product: Wireless Keyboard/Mouse(2.4G) > usb 6-2: Manufacturer: HOLTEK > usb usb10: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb10: Product: UHCI Host Controller > usb usb10: Manufacturer: Linux 2.6.27.12-170.2.5.fc10.x86_64 uhci_hcd > usb usb10: SerialNumber: 0000:01:09.1 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > usb 6-3: new low speed USB device using ohci_hcd and address 3 > rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k, hpet irqs > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel(a)redhat.com > cpuidle: using governor ladder > cpuidle: using governor menu > usb 6-3: configuration #1 chosen from 1 choice > usb 6-3: New USB device found, idVendor=051d, idProduct=0002 > usb 6-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2 > usb 6-3: Product: Back-UPS ES 550 FW:828.D2 .I USB FW:D2 > usb 6-3: Manufacturer: APC > usb 6-3: SerialNumber: 5B0804T22934 > usbcore: registered new interface driver hiddev > input: HOLTEK Wireless Keyboard/Mouse(2.4G) as /devices/pci0000:00/0000:00:04.0/usb6/6-2/6-2:1.0/input/input3 > input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless Keyboard/Mouse(2.4G)] on usb-0000:00:04.0-2 > input: HOLTEK Wireless Keyboard/Mouse(2.4G) as /devices/pci0000:00/0000:00:04.0/usb6/6-2/6-2:1.1/input/input4 > input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless Keyboard/Mouse(2.4G)] on usb-0000:00:04.0-2 > hiddev96hidraw2: USB HID v1.10 Device [APC Back-UPS ES 550 FW:828.D2 .I USB FW:D2 ] on usb-0000:00:04.0-3 > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use > nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or > sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > registered taskstats version 1 > Magic number: 13:415:953 > Freeing unused kernel memory: 1292k freed > Write protecting the kernel read-only data: 4748k > pata_acpi 0000:00:06.0: setting latency timer to 64 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > type=1404 audit(1235076859.996:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > SELinux: 8192 avtab hash slots, 113806 rules. > SELinux: 8192 avtab hash slots, 113806 rules. > SELinux: 8 users, 11 roles, 2669 types, 120 bools, 1 sens, 1024 cats > SELinux: 73 classes, 113806 rules > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev dm-0, type ext3), uses xattr > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts > SELinux: initialized (dev devpts, type devpts), uses transition SIDs > SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts > SELinux: initialized (dev pipefs, type pipefs), uses task SIDs > SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts > SELinux: initialized (dev sockfs, type sockfs), uses task SIDs > SELinux: initialized (dev proc, type proc), uses genfs_contexts > SELinux: initialized (dev bdev, type bdev), uses genfs_contexts > SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > type=1403 audit(1235076860.176:3): policy loaded auid=4294967295 ses=4294967295 > udevd version 127 started > Initializing USB Mass Storage driver... > scsi6 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > ACPI: WMI: Mapper loaded > pata_amd 0000:00:06.0: version 0.3.10 > pata_amd 0000:00:06.0: setting latency timer to 64 > scsi7 : pata_amd > scsi8 : pata_amd > ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 > ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 > ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33 > ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) > ata7.00: configured for UDMA/33 > ata8: port disabled. ignoring. > isa bounce pool size: 16 pages > scsi 7:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5 > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 7:0:0:0: Attached scsi CD-ROM sr0 > sr 7:0:0:0: Attached scsi generic sg1 type 5 > forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. > ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 > forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 > forcedeth 0000:00:0a.0: setting latency timer to 64 > Floppy drive(s): fd0 is 1.44M > input: PC Speaker as /devices/platform/pcspkr/input/input5 > FDC 0 is a post-1991 82077 > Linux video capture interface: v2.00 > forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:22:15:3d:f3:14 > forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 > firewire_ohci 0000:01:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 > CE: hpet increasing min_delta_ns to 15000 nsec > CE: hpet increasing min_delta_ns to 22500 nsec > CE: hpet increasing min_delta_ns to 33750 nsec > firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.0 > cx2388x alsa driver version 0.0.6 loaded > cx88_audio 0000:01:0b.1: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 > cx88[0]: subsystem: 107d:665e, board: WinFast DTV2000 H [card=51,autodetected] > cx88[0]: TV tuner type 63, Radio tuner type -1 > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > tuner' 0-0043: chip found @ 0x86 (cx88[0]) > tda9887 0-0043: creating new instance > tda9887 0-0043: tda988[5/6/7] found > tuner' 0-0061: chip found @ 0xc2 (cx88[0]) > tuner' 0-0063: chip found @ 0xc6 (cx88[0]) > firewire_core: created device fw0: GUID 001e8c00015bd693, S400 > tuner-simple 0-0061: creating new instance > tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > input: cx88 IR (WinFast DTV2000 H) as /devices/pci0000:00/0000:00:08.0/0000:01:0b.1/input/input6 > cx88[0]/1: CX88x/0: ALSA support for cx2388x boards > ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 > HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 > HDA Intel 0000:00:07.0: setting latency timer to 64 > cx8800 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 > cx88[0]/0: found at 0000:01:0b.0, rev: 5, irq: 18, latency: 32, mmio: 0xfb000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... > ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) > ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) > ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0 > ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 > cx88[0]/2: cx2388x 8802 Driver Manager > cx88-mpeg driver manager 0000:01:0b.2: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 > cx88[0]/2: found at 0000:01:0b.2, rev: 5, irq: 18, latency: 32, mmio: 0xf9000000 > ACPI: PCI Interrupt Link [AE0B] enabled at IRQ 16 > HDA Intel 0000:02:00.1: PCI INT B -> Link[AE0B] -> GSI 16 (level, low) -> IRQ 16 > HDA Intel 0000:02:00.1: setting latency timer to 64 > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > cx88[0]/2: subsystem: 107d:665e, board: WinFast DTV2000 H [card=51] > cx88[0]/2: cx2388x based DVB/ATSC card > tuner-simple 0-0061: attaching existing instance > tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > DVB: registering new adapter (cx88[0]) > DVB: registering frontend 0 (Conexant CX22702 DVB-T)... > device-mapper: multipath: version 1.0.5 loaded > EXT3 FS on dm-0, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: initialized (dev sda1, type ext3), uses xattr > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > Adding 4095992k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:4095992k > SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > powernow-k8: Found 1 AMD Phenom(tm) 9550 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) > powernow-k8: 0 : pstate 0 (2200 MHz) > powernow-k8: 1 : pstate 1 (1100 MHz) > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > usb-storage: device scan complete > scsi 6:0:0:0: Direct-Access GENERIC USB Storage-SMC I19B PQ: 0 ANSI: 0 CCS > scsi 6:0:0:1: Direct-Access GENERIC USB Storage-CFC I19B PQ: 0 ANSI: 0 CCS > scsi 6:0:0:2: Direct-Access GENERIC USB Storage-SDC I19B PQ: 0 ANSI: 0 CCS > scsi 6:0:0:3: Direct-Access GENERIC USB Storage-MSC I19B PQ: 0 ANSI: 0 CCS > sd 6:0:0:0: [sdb] Attached SCSI removable disk > sd 6:0:0:0: Attached scsi generic sg2 type 0 > sd 6:0:0:1: [sdc] Attached SCSI removable disk > sd 6:0:0:1: Attached scsi generic sg3 type 0 > sd 6:0:0:2: [sdd] Attached SCSI removable disk > sd 6:0:0:2: Attached scsi generic sg4 type 0 > sd 6:0:0:3: [sde] Attached SCSI removable disk > sd 6:0:0:3: Attached scsi generic sg5 type 0 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts > Bluetooth: Core ver 2.13 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.11 > Bluetooth: L2CAP socket layer initialized > Bluetooth: SCO (Voice Link) ver 0.6 > Bluetooth: SCO socket layer initialized > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bridge firewalling registered > eth0: no IPv6 routers present

2 2

← Newer
1
...
12
13
14
15
16
17
18
...
60
Older →

Jump to page: