F20 NetworkManager bridged br0 firewalld & dhcp not getting through?
by Patrick Lists
Hi,
Best wishes for 2014!
I'm using Fedora 20 with a bridged connection br0 which I assume should
forward the DHCP requests from the VMs running on this box.
Unfortunately firewalld seems to block the DHCP requests from the VMs
although in firewall-config I have enabled DHCP in the 'permanent'
configuration and reloaded firewalld.
In F19 this rule was added (by libvirtd?):
-I FORWARD -m physdev --physdev-is-bridged -j ACCEPT
but I don't see it anywhere in the output of iptables -L -n with
firewalld running. Could that be missing? If yes, how to add it?
Now my first thought is that it makes total sense this does not work
because clearly firewalld, systemctl and journalctl were forged in Mount
Doom and unleashed upon mere mortals perfectly content with SysV init,
plain iptables and plain text logfiles just to have some fun. But I
really would like this to work. So if anyone has the magic trick to make
firewalld not block the DHCP requests then I sure would appreciate it.
Thanks,
Patrick
10 years, 4 months
lyx in fedora 20
by Patrick Dupre
Hello,
when I lauch lyx, I just get:
lyx: error while loading shared libraries: libboost_regex-mt.so.1.53.0: cannot open shared object file: No such file or directory
I need it urgently!!
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
10 years, 4 months
fedora 20: mysq doesn't start automatically
by Rafnews
Hi,
according to several webpages, once installed you can set the mysqld
service enable and start automatically when fedora starts.
for that you must run:
systemctl enable mysqld.service
systemctl start mysqld.service
however in my case this only start mysqld service for the running time.
Once computer is restarted, mysqld does not start automatically.
so where is the problem ?
should i use back chkconfig ?
thx.
A.
10 years, 4 months
dnf-yum observation -
by Bob Goodwin
I did dnf update this morning with the following result:
[root@box10 bobg]# dnf update
Upgrading:
ibus-kkc
krb5-libs
krb5-libs
libbluray
libkkc
libkkc-common
net-snmp-libs
qtwebkit
setroubleshoot-plugins
Transaction Summary
=======================
Upgrade 9 Packages
After which I ran yum update and it found seven more to do:
[root@box10 bobg]# yum update
Updating:
NetworkManager
NetworkManager-glib
alsa-utils
coreutils
gupnp
policycoreutils
policycoreutils-python
Installing for dependencie
checkpolicy
Transaction Summary
==========================
Install ( 1 De
Upgrade 7 Packages
As I said this is just an observation since we were asked to try dnf.
This is Fedora-20/64, XFCE.
Bob
--
http://www.qrz.com/db/w2bod
Box10 Fedora-20/64bit Linux
10 years, 4 months
Re: [SOLVED] installing akmod-nividia on F20 - machine hang after reboot, "Started Builds ..."
by David Shwatrz
Hello,
Thanks for all those who gave an advice.
After running:
yum -y install kernel-devel
and rebooting the machine, the problem disappears.
It seems to me that the akmod-nvidia rpm should require kernel-devel,
because it is useless without it; so that yum install akmod-nvidia
will also install kernel-devel. The kernel-devel rpm is not part of
the default installation of Fedora 20, and I am sure that other people
encountered this issue.
Regards,
DavidS
On Fri, Jan 10, 2014 at 12:07 AM, bitlord <bitlord0xff(a)gmail.com> wrote:
> On Thu, 2014-01-09 at 20:25 +0200, David Shwatrz wrote:
>> Hello, fedora users,
>> I have an Nvidia graphic card. Instead of using the default nouveau
>> driver, I installed akmod-nvidia (simply by yum -y install
>> akmod-nvidia)
>>
>> Now first time after installing akmod-nvidia and restarting the
>> machine boot hanged with this message:
>> [OK] Started Builds and install kmods from akmod packages.
>>
>> I waited for more than 10 minutes and nothing happened, I cannot boot.
>> Any ideas ? what should I do so that it will boot OK ?
>>
>> regards,
>> DavidS
>
> It is possible that you are missing kernel-devel package
> use this for installing http://rpmfusion.org/Howto/nVidia
> also if you are interested why it doesn't install 'kernel-devel'
> package, look here https://bugzilla.redhat.com/show_bug.cgi?id=1047041
>
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
10 years, 4 months
F20: Cisco vpn does not launch after a couple of wake-ups from hibernate
by Ranjan Maitra
Hello,
I have been having a somewhat unusual problem after waking up from
hibernate with the Cisco VPN client. This only happens with F20 -- it
was fine till F19.
Here is what happens: I switch on the Cisco vpnui using:
/opt/cisco/anyconnect/bin/vpnui
The window to connect comes on and vanishes immediately.
Not knowing what is going on, I looked at:
tail -f /var/log/messages
and here is what I get from the time the client is asked for to the
point of vanishing:
Jan 5 18:55:59 alakananda acvpnui[9684]: Initializing vpnapi version
3.1.04072 ().
Jan 5 18:55:59 alakananda acvpnui[9684]: Function:
loadProfiles File: ../../vpn/Api/ProfileMgr.cpp Line: 100 No profile is
available.
Jan 5 18:55:59 alakananda acvpnui[9684]: Function:
getCurrentState File: ../../vpn/Api/ClientIfcBase.cpp Line: 2058 API
service not ready
Jan 5 18:55:59 alakananda acvpnui[9684]: Current
Preference Settings: ServiceDisable: false CertificateStoreOverride:
false CertificateStore: All ShowPreConnectMessage: false
AutoConnectOnStart: false MinimizeOnConnect: true LocalLanAccess: false
AutoReconnect: true AutoUpdate: true ProxySettings: Native
AllowLocalProxyConnections: true PPPExclusion: Disable
PPPExclusionServerIP: EnableScripting: false
TerminateScriptOnNextEvent: false AuthenticationTimeout: 12
IPProtocolSupport: IPv4,IPv6 AllowManualHostInput: true
BlockUntrustedServers: true PublicProxyServerAddress: Jan 5 18:55:59
alakananda acvpnui[9684]: Function: CvcGtkNotifyBalloon
File: ../../../vpn/GUI/Linux/CvcGtkNotifyBalloon.cpp Line: 87 Invoked
Function: dlopen Return Code: -33554427 (0xFE000005) Description:
libnotify.so.1: cannot open shared object file: No such file or
directory
Jan 5 18:55:59 alakananda acvpnui[9684]: Function:
connectTransport File: ../../vpn/Common/IPC/SocketTransport.cpp Line:
995 Invoked Function: ::connect Return Code: 111 (0x0000006F)
Description: unknown
Jan 5 18:55:59 alakananda acvpnui[9684]:
Function: connectIpc File: ../../vpn/Common/IPC/IPCTransport.cpp Line:
254 Invoked Function: CSocketTransport::connectTransport Return Code:
-31588340 (0xFE1E000C) Description: SOCKETTRANSPORT_ERROR_CONNECT
Jan 5 18:55:59 alakananda acvpnui[9684]: Function:
terminateIpcConnection File: ../../vpn/Common/IPC/IPCTransport.cpp
Line: 406 Invoked Function: CSocketTransport::writeSocketBlocking
Return Code: -31588319 (0xFE1E0021) Description:
SOCKETTRANSPORT_ERROR_NO_SOCKET_HANDLE:The socket transport does not
possess a valid socket handle.
Jan 5 18:55:59 alakananda acvpnui [9684]: Function: initIpc
File: ../../vpn/Api/ApiIpc.cpp Line: 423 Invoked Function:
CIpcTransport::connectIpc Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Jan 5 18:55:59 alakananda acvpnui[9684]: Function:
initiateAgentConnection File: ../../vpn/Api/ApiIpc.cpp Line: 336
Invoked Function: ApiIpc::initIpc Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Jan 5 18:55:59 alakananda acvpnui[9684]: Function: run
File: ../../vpn/Api/ApiIpc.cpp Line: 570 Invoked Function:
ApiIpc::initiateAgentConnection Return Code: -31588340 (0xFE1E000C)
Description: SOCKETTRANSPORT_ERROR_CONNECT
Jan 5 18:55:59 alakananda acvpnui[9684]: Function: attach
File: ../../vpn/Api/ClientIfcBase.cpp Line: 606 Client failed to
attach.
Jan 5 18:55:59 alakananda acvpnui [9684]: Function: detach
File: ../../vpn/Api/ClientIfcBase.cpp Line:438 Shutting down vpnapi
Jan 5 18:55:59 alakananda acvpnui[9684]:
Function: activateConnectEvent File: ../../vpn/Api/ConnectMgr.cpp Line:
1352 NULL object. Cannot establish a connection at this time.
Any suggestions as to what is going wrong. I want to mention that this
is not a problem for the first couple of times the machine is woken up
from hibernation (after reboot). Also, there was not a problem with F19
(but I did go only up to the 3.11 kernel there).
The above behavior is all with an updated F20.
Many thanks and best wishes,
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be
deleted on receipt. Please respond to the mailing list if appropriate.
For those needing to send personal or professional e-mail, please use
appropriate addresses.
____________________________________________________________
GET FREE SMILEYS FOR YOUR IM & EMAIL - Learn more at http://www.inbox.com/smileys
Works with AIM®, MSN® Messenger, Yahoo!® Messenger, ICQ®, Google Talk™ and most webmails
10 years, 4 months
qemu-system-x86 eat 400% CPU
by Franta Hanzlík
On Fedora 19/x86_64, Xeon 4cores/8threads, 8GB RAM I have in a VM
installed windows 2000 (full qemu cmdline see below). What is weird,
'top' on host show that all 4 threads load CPU at 100% each. On guest
are running only minimum processes and windows task manager show load
0-2%; virtual machine is almost idle. VM itself seems react well, its
responses are fine.
Please, how is possible debug this issue?
/usr/bin/qemu-system-x86_64 -machine accel=kvm -name w2kf19sp4N-ide -S -machine pc-i440fx-1.4,accel=kvm,usb=off -m 4096 -smp 4,sockets=1,cores=2,threads=4 -uuid 1934a452-a128-cf42-2b83-d8943cf9ad3e -no-user-config -nodefaults -chardev
socket,id=charmonitor,path=/var/lib/libvirt/qemu/w2kf19sp4N-ide.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=localtime -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive
file=/mnt/zalohy/virtualy/w2kf19sp2New-ide.img,if=none,id=drive-ide0-0-0,format=raw -device ide-hd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=24,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:54:ec:4f,bus=pci.0,addr=0x3
-chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -device usb-tablet,id=input0 -vnc 127.0.0.1:0 -vga std -device intel-hda,id=sound0,bus=pci.0,addr=0x4 -device hda-duplex,id=sound0-codec0,bus=sound0.0,cad=0 -device
virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
TIA, Franta Hanzlik
10 years, 4 months
installing akmod-nividia on F20 - machine hang after reboot, "Started Builds ..."
by David Shwatrz
Hello, fedora users,
I have an Nvidia graphic card. Instead of using the default nouveau
driver, I installed akmod-nvidia (simply by yum -y install
akmod-nvidia)
Now first time after installing akmod-nvidia and restarting the
machine boot hanged with this message:
[OK] Started Builds and install kmods from akmod packages.
I waited for more than 10 minutes and nothing happened, I cannot boot.
Any ideas ? what should I do so that it will boot OK ?
regards,
DavidS
10 years, 4 months
basic question - running modified kickstart file??
by bruce
Hi.
Assume I create the initial dvd for fed. I go through the process to
do a simple desktop install.
>From the install, I get a kickstart file (ks.cfg). if I want to make
some mods to the kickstart file, and then rerun the install, how do I
do this, and use the modified kickstart that I now have?
Or, is there a way to do an unattended install that simply uses the
modified kickstart file, since it would have all of the selected
entries?
I've been looking all over for how this could/should work.
Thanks
10 years, 4 months
