Boot stops with blank screen on fc27 and graphical boot
by Alex
Hi,
I have a fc27 system that I just upgraded from fc26. I've been having
a problem for the last five or six kernels (three months, maybe) where
booting the default kernel results in the system booting to a blank
screen and being unresponsive. No mouse activity, no ability to reach
it from a remote system.
So this has been going on with fc26 before the upgrade to fc27 as well.
I'm an experienced Linux admin, but not familiar with the new graphical boot.
If I boot into runlevel 3 then run "systemctl isolate
graphical.target" it starts wayland normally.
I'm not sure what information to provide to help troubleshoot this. I
can't tell what the last boot message printed is before the screen
goes blank. I also don't see anything in messages or boot.log because
it only shows the most recent boot.
I believe it's somehow related to the kernel because it boots properly
with an old rescue kernel.
Anticipating this being a display problem, here is the output from
lspci of my video controller and xorg packages.
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Juniper XT [Radeon HD 5770] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device e147
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f7e20000 (64-bit, non-prefetchable) [size=128K]
I/O ports at e000 [size=256]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
xorg-x11-drv-qxl-0.1.5-5.fc27.x86_64
abrt-addon-xorg-2.10.5-1.fc27.x86_64
xorg-x11-apps-7.7-18.fc27.x86_64
xorg-x11-drv-openchrome-0.6.0-3.fc27.x86_64
xorg-x11-server-common-1.19.5-1.fc27.x86_64
xorg-x11-drv-nouveau-1.0.15-3.fc27.x86_64
xorg-x11-xbitmaps-1.1.1-11.fc27.noarch
xorg-x11-drv-evdev-2.10.5-4.fc27.x86_64
xorg-x11-fonts-misc-7.5-18.fc27.noarch
xorg-x11-proto-devel-7.7-23.fc27.noarch
xorg-x11-xauth-1.0.9-9.fc27.x86_64
xorg-x11-drv-vmware-13.2.1-4.fc27.x86_64
xorg-x11-xkb-utils-7.7-21.fc27.x86_64
xorg-x11-xinit-1.3.4-16.fc27.x86_64
xorg-x11-drv-ati-7.9.0-3.fc27.x86_64
xorg-x11-drv-vesa-2.3.2-28.fc27.x86_64
xorg-x11-font-utils-7.5-35.fc27.x86_64
xorg-x11-drv-intel-2.99.917-31.20171025.fc27.x86_64
xorg-x11-server-Xorg-1.19.5-1.fc27.x86_64
xorg-x11-drv-libinput-0.26.0-1.fc27.x86_64
xorg-x11-drv-wacom-0.35.0-3.fc27.x86_64
xorg-x11-fonts-Type1-7.5-18.fc27.noarch
xorg-x11-server-Xwayland-1.19.5-1.fc27.x86_64
xorg-x11-drv-fbdev-0.4.3-28.fc27.x86_64
xorg-x11-server-utils-7.7-23.fc27.x86_64
xorg-x11-utils-7.5-25.fc27.x86_64
I've pasted here the journalctl output from the boot where the system
goes blank in hopes someone recognizes something that doesn't look
correct.
-- Logs begin at Sun 2017-07-09 16:36:51 EDT, end at Fri 2017-11-24
13:36:30 EST. --
systemd[1684]: Reached target Timers.
systemd[1684]: Starting D-Bus User Message Bus Socket.
systemd[1684]: Reached target Paths.
systemd[1684]: Listening on D-Bus User Message Bus Socket.
systemd[1684]: Reached target Sockets.
systemd[1684]: Reached target Basic System.
systemd[1684]: Reached target Default.
systemd[1684]: Startup finished in 77ms.
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.2' (uid=1000 pid=1757
comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.a11y.Bus' requested by ':1.3' (uid=1000 pid=1790
comm="/usr/libexec/gnome-session-check-accelerated ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.a11y.Bus'
org.a11y.Bus[1765]: dbus-daemon[1799]: Activating service
name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1790
comm="/usr/libexec/gnome-session-check-accelerated ")
org.a11y.Bus[1765]: dbus-daemon[1799]: Successfully activated service
'org.a11y.atspi.Registry'
org.a11y.Bus[1765]: SpiRegistry daemon is running with well-known name
- org.a11y.atspi.Registry
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.Daemon' requested by ':1.6' (uid=1000 pid=1790
comm="/usr/libexec/gnome-session-check-accelerated ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.Daemon'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.10' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.12' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.14' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.16' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.18' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.19' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
gnome-session[1757]: gnome-session-binary[1757]: WARNING: Could not
parse desktop file powerdevil.desktop or it references a not found
TryExec binary
gnome-session-binary[1757]: WARNING: Could not parse desktop file
powerdevil.desktop or it references a not found TryExec binary
gnome-keyring-daemon[1846]: couldn't access control socket:
/run/user/1000/keyring/control: No such file or directory
gnome-keyring-daemon[1847]: couldn't access control socket:
/run/user/1000/keyring/control: No such file or directory
gnome-keyring-d[1846]: couldn't access control socket:
/run/user/1000/keyring/control: No such file or directory
gnome-keyring-daemon[1848]: couldn't access control socket:
/run/user/1000/keyring/control: No such file or directory
gnome-keyring-d[1847]: couldn't access control socket:
/run/user/1000/keyring/control: No such file or directory
gnome-keyring-d[1848]: couldn't access control socket:
/run/user/1000/keyring/control: No such file or directory
gnome-keyring-ssh.desktop[1845]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.19' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
gnome-shell[1858]: JS WARNING: [resource:///org/gnome/shell/ui/main.js
315]: reference to undefined property "MetaStage"
gnome-shell[1858]: JS WARNING:
[resource:///org/gnome/shell/ui/layout.js 221]: reference to undefined
property "MetaWindowGroup"
gnome-shell[1858]: JS WARNING:
[resource:///org/gnome/shell/ui/osdMonitorLabeler.js 59]: reference to
undefined property "MetaDBusDisplayConfigSkeleton"
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.impl.portal.PermissionStore' requested by
':1.24' (uid=1000 pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.freedesktop.impl.portal.PermissionStore'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.Shell.CalendarServer' requested by ':1.24' (uid=1000
pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.evolution.dataserver.Sources5' requested by ':1.27'
(uid=1000 pid=1927 comm="/usr/libexec/gnome-shell-calendar-server ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.portal.IBus' requested by ':1.28' (uid=1000
pid=1928 comm="ibus-daemon --xim --panel disable ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.freedesktop.portal.IBus'
gnome-shell[1858]: JS WARNING:
[resource:///org/gnome/shell/ui/slider.js 38]: reference to undefined
property "CallyActor"
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.OnlineAccounts' requested by ':1.32' (uid=1000
pid=1935 comm="/usr/libexec/evolution-source-registry ")
goa-daemon[1965]: goa-daemon version 3.26.1 starting
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.Identity' requested by ':1.33' (uid=1000 pid=1965
comm="/usr/libexec/goa-daemon ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.OnlineAccounts'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='ca.desrt.dconf' requested by ':1.24' (uid=1000 pid=1858
comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.Identity'
goa-identity-se[1982]: GoaKerberosIdentityManager: Using polling for
change notification for credential cache type 'KEYRING'
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'ca.desrt.dconf'
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.evolution.dataserver.Sources5'
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.Shell.CalendarServer'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.Telepathy.AccountManager' requested by ':1.36'
(uid=1000 pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.UDisks2VolumeMonitor' requested by ':1.24' (uid=1000
pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.freedesktop.Telepathy.AccountManager'
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.UDisks2VolumeMonitor'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.MTPVolumeMonitor' requested by ':1.24' (uid=1000
pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.MTPVolumeMonitor'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.AfcVolumeMonitor' requested by ':1.24' (uid=1000
pid=1858 comm="/usr/bin/gnome-shell ")
org.gtk.vfs.AfcVolumeMonitor[1765]: Volume monitor alive
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.AfcVolumeMonitor'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.GoaVolumeMonitor' requested by ':1.24' (uid=1000
pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.GoaVolumeMonitor'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.GPhoto2VolumeMonitor' requested by ':1.24' (uid=1000
pid=1858 comm="/usr/bin/gnome-shell ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.GPhoto2VolumeMonitor'
spice-vdagent[2084]: Cannot access vdagent virtio channel
/dev/virtio-ports/com.redhat.spice.0
gnome-session[1757]: gnome-session-binary[1757]: WARNING: App
'spice-vdagent.desktop' exited with code 1
gnome-session-binary[1757]: WARNING: App 'spice-vdagent.desktop'
exited with code 1
gsd-xsettings[2109]: Failed to get current display configuration
state: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name
"org.gnome.Mutter.DisplayConfig" does not exist
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.48' (uid=1000
pid=2091 comm="/usr/libexec/gsd-sharing ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
gsd-sharing[2091]: Failed to StopUnit service:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process
org.freedesktop.systemd1 exited with status 1
gsd-sharing[2091]: Failed to StopUnit service:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process
org.freedesktop.systemd1 exited with status 1
gsd-sharing[2091]: Failed to StopUnit service:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process
org.freedesktop.systemd1 exited with status 1
gsd-sharing[2091]: Failed to StopUnit service:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process
org.freedesktop.systemd1 exited with status 1
gsd-rfkill[2089]: g_object_notify: object class 'CcRfkillGlib' has no
property named 'kernel-noinput'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.Tracker1' requested by ':1.64' (uid=1000
pid=2231 comm="gdbus call -e -d org.freedesktop.DBus -o /org/free")
vmware-user.desktop[2252]: vmware-user: could not open /proc/fs/vmblock/dev
sealertauto.desktop[2242]: SELinux Troubleshooter: Applet requires
SELinux be enabled to run.
gnome-session-binary[1757]: Entering running state
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.freedesktop.Tracker1'
tracker-store.desktop[2231]: (uint32 1,)
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.evolution.dataserver.Calendar7' requested by ':1.73'
(uid=1000 pid=2223 comm="/usr/libexec/evolution/evolution-alarm-notify
")
libcanberra-login-sound.desktop[2255]: Failed to play sound: File or
data not found
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.FileManager1' requested by ':1.66' (uid=1000
pid=2221 comm="nautilus-desktop ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.freedesktop.FileManager1'
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.evolution.dataserver.Calendar7'
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.evolution.dataserver.AddressBook9' requested by
':1.77' (uid=1000 pid=2330
comm="/usr/libexec/evolution-calendar-factory-subprocess")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.evolution.dataserver.AddressBook9'
gnome-shell[1858]: JS WARNING:
[resource:///org/gnome/shell/ui/workspaceThumbnail.js 892]: reference
to undefined property "_switchWorkspaceNotifyId"
gnome-software[2259]: plugin appstream took 0.6 seconds to do setup
gnome-software[2259]: enabled plugins: systemd-updates,
packagekit-local, packagekit-refresh, packagekit-proxy,
packagekit-offline, os-release, fwupd, desktop-categories, packagekit,
packagekit-upgrade, shell-extensions, appstream,
fedora-pkgdb-collections, epiphany, hardcoded-blacklist,
hardcoded-featured, flatpak, hardcoded-popular, steam,
rewrite-resource, generic-updates, desktop-menu-path, modalias,
packagekit-refine, icons, odrs, repos, provenance, packagekit-history,
key-colors, provenance-license, key-colors-metadata
gnome-software[2259]: disabled plugins: fedora-tagger-usage,
ubuntuone, dpkg, ostree, dummy, rpm
gnome-shell[1858]: remove_mnemonics: assertion 'label != NULL' failed
nautilus-deskto[2221]: Can not get _NET_WORKAREA
nautilus-deskto[2221]: Can not determine workarea, guessing at layout
gnome-shell[1858]: STACK_OP_ADD: window 0x2800001 already in stack
gnome-shell[1858]: STACK_OP_ADD: window 0x2800001 already in stack
gnome-software[2259]: running get-updates-historical with timeout=60
on plugin=fwupd took 736ms
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gtk.vfs.Metadata' requested by ':1.66' (uid=1000 pid=2221
comm="nautilus-desktop ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gtk.vfs.Metadata'
gnome-shell[1858]: invalid unclassed pointer in cast to 'GObject'
gnome-shell[1858]: g_object_get_qdata: assertion 'G_IS_OBJECT (object)' failed
gnome-shell[1858]: invalid unclassed pointer in cast to 'GObject'
gnome-shell[1858]: g_object_set_qdata_full: assertion 'G_IS_OBJECT
(object)' failed
gnome-shell[1858]: cogl_pango_ensure_glyph_cache_for_layout: assertion
'(((__extension__ ({ GTypeInstance *__inst = (GTypeInstance*)
((layout)); GType __t = ((pango_layout_get_type ())); gboolean __r; if
(!__inst) __r = (0); else if (__inst->g_class &&
__inst->g_class->g_type == __t) __r = (!(0)); else __r =
g_type_check_instance_is_a (__inst, __t); __r; }))))' failed
gnome-shell[1858]: pango_renderer_draw_layout: assertion
'PANGO_IS_LAYOUT (layout)' failed
gnome-shell[1858]: pango_layout_context_changed: assertion
'PANGO_IS_LAYOUT (layout)' failed
tracker-extract[2225]: Couldn't create PopplerDocument from
uri:'file:///home/dave/Documents/RFQ%20Bill%202%20MV3%20Main%20Works%20Rev%205.pdf',
PDF document is damaged
gnome-shell[1858]: GNOME Shell started at Fri Nov 24 2017 12:45:04
GMT-0500 (EST)
gnome-keyring-daemon[1848]: couldn't allocate secure memory to keep
passwords and or keys from being written to the disk
gnome-keyring-d[1848]: couldn't allocate secure memory to keep
passwords and or keys from being written to the disk
gnome-shell[1858]: JS WARNING:
[resource:///org/gnome/shell/ui/modalDialog.js 218]: reference to
undefined property "GdkX11Screen"
goa-daemon[1965]:
/org/gnome/OnlineAccounts/Accounts/account_1451070724_0: Setting
AttentionNeeded to TRUE because EnsureCredentials() failed with: Bad
Request (rest-proxy-error-quark, 400)
pulseaudio[1893]: [pulseaudio] bluez5-util.c: GetManagedObjects()
failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply.
Possible causes include: the remote application did not send a reply,
the message bus security policy blocked the reply, the reply timeout
expired, or the network connection was broken.
gnome-software[2259]: running get-distro-updates with
refine-flags=require-setup-action with timeout=60 on
plugin=fedora-pkgdb-collections took 405ms
gnome-shell[1858]: The property brightness doesn't seem to be a normal
object property of [0x55b3aa33bfc0 StWidget] or a registered special
property
gnome-shell[1858]: The property vignette_sharpness doesn't seem to be
a normal object property of [0x55b3aa33bfc0 StWidget] or a registered
special property
gnome-shell[1858]: The property brightness doesn't seem to be a normal
object property of [0x55b3aa323c80 StWidget] or a registered special
property
gnome-shell[1858]: The property vignette_sharpness doesn't seem to be
a normal object property of [0x55b3aa323c80 StWidget] or a registered
special property
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.gnome.Terminal' requested by ':1.84' (uid=1000 pid=2523
comm="gnome-terminal ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Successfully activated
service 'org.gnome.Terminal'
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
gnome-terminal-[2528]: Allocating size to GtkScrollbar 0x55c31f1e2300
without calling gtk_widget_get_preferred_width/height(). How does the
code know the size to allocate?
su[2570]: (to root) dave on pts/0
su[2570]: pam_systemd(su-l:session): Cannot create session: Already
running in a session
su[2570]: pam_unix(su-l:session): session opened for user root by (uid=1000)
su[2570]: pam_unix(su-l:session): session closed for user root
su[4290]: (to root) dave on pts/1
su[4290]: pam_systemd(su-l:session): Cannot create session: Already
running in a session
su[4290]: pam_unix(su-l:session): session opened for user root by dave(uid=1000)
su[4290]: pam_unix(su-l:session): session closed for user root
dbus-daemon[1765]: [session uid=1000 pid=1763] Activating service
name='org.freedesktop.systemd1' requested by ':1.19' (uid=1000
pid=1757 comm="/usr/libexec/gnome-session-binary ")
dbus-daemon[1765]: [session uid=1000 pid=1763] Activated service
'org.freedesktop.systemd1' failed: Process org.freedesktop.systemd1
exited with status 1
gsd-print-notif[2088]: Source ID 2 was not found when attempting to remove it
systemd[1684]: Stopped target Default.
systemd[1684]: Stopped target Basic System.
systemd[1684]: Stopped target Sockets.
systemd[1684]: Closed D-Bus User Message Bus Socket.
systemd[1684]: Stopped target Timers.
systemd[1684]: Stopped target Paths.
systemd[1684]: Reached target Shutdown.
systemd[1684]: Starting Exit the Session...
systemd[1684]: Received SIGRTMIN+24 from PID 4404 (kill).
systemd[1685]: pam_unix(systemd-user:session): session closed for user dave
3 years, 9 months
- 3
- 2
Evolution and network proxy
by martin.wagner＠mailbit.io
Hi
I'm trying to set up an IMAP account in Evolution (3.24.6-1.fc26) that would connect through a network proxy. I've also have other IMAP accounts in Evolution so I just want this one account to go through a proxy. I thought it would just be to go to Network Preferences and define a custom proxy, but it doesn't work. Evolution displays a question mark next to the account. What I did was to define a Socks Proxy at localhost:9050 and tag this one account to use it. I know that the proxy works fine, because if I tell Gnome to use it in All Settings -> Network that for example Firefox uses that proxy.
Am I missing something here?
3 years, 9 months
- 3
- 2
OpenJDK alternatives broken after update to F27
by Clemens Eisserer
Hi,
Currently I don't seem to be able to get OpenJDK working again on my
F27 system (updated from F26).
dnf reinstall *openjdk*
Reinstalliert:
java-1.8.0-openjdk.x86_64 1:1.8.0.151-1.b12.fc27
java-1.8.0-openjdk-demo.x86_64 1:1.8.0.151-1.b12.fc27
java-1.8.0-openjdk-devel.x86_64 1:1.8.0.151-1.b12.fc27
java-1.8.0-openjdk-headless.x86_64 1:1.8.0.151-1.b12.fc27
java-1.8.0-openjdk-openjfx.x86_64 1:1.8.0.151-1.b12.fc27
java-1.8.0-openjdk-openjfx-devel.x86_64 1:1.8.0.151-1.b12.fc27
[root@localhost ce]# alternatives --config java
[root@localhost ce]#
[ce@localhost ~]$ java
bash: java: Command not found
Any ideas what is going on here?
Thank you in advance, Clemens
3 years, 9 months
- 2
- 1
Fedora 26 to 27: Update problem.
by Dario Lesca
I have update my notebook since Fedora 18 to Fedora 26 always without
problem.
Today I have try to update Fedora 26 to 27, but after download packages
and run "dnf system-upgrade reboot", when the system restart the update
fail after a while after this boot message:
Starting System Upgrade using DNF...
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting Update the operating system whilst offline...
[ OK ] Started Update the operating system whilst offline.
[ 205.755691] dnf[967]: Errore: Sincronizzazione cache non riuscita per il repo 'updates'
[FAILED] Failed to start System Upgrade using DNF.
See 'systemctl status dnf-system-upgrade.service' for details.
I restart the notebook in Fedora 26 and into log I fount this error:
2017-11-16T15:37:58Z INFO --- logging initialized ---
2017-11-16T15:37:58Z DDEBUG timer: config: 4 ms
2017-11-16T15:37:58Z DEBUG Loaded plugins: builddep, config-manager, copr, debug, debuginfo-install, download, generate_completion_cache, needs-restarting, playground, repoclosure, repograph, repomanage, reposync, system-upgrade
2017-11-16T15:37:58Z DEBUG DNF version: 2.7.5
2017-11-16T15:37:58Z DDEBUG Command: dnf system-upgrade reboot
2017-11-16T15:37:58Z DDEBUG Installroot: /
2017-11-16T15:37:58Z DDEBUG Releasever: 26
2017-11-16T15:37:58Z DEBUG cachedir: /var/cache/dnf
2017-11-16T15:37:58Z DDEBUG Base command: system-upgrade
2017-11-16T15:37:58Z DDEBUG Extra commands: ['system-upgrade', 'reboot']
2017-11-16T15:37:58Z DDEBUG Cleaning up.
2017-11-16T15:39:15Z INFO --- logging initialized ---
2017-11-16T15:39:15Z DDEBUG timer: config: 1240 ms
2017-11-16T15:39:16Z DEBUG Loaded plugins: builddep, config-manager, copr, debug, debuginfo-install, download, generate_completion_cache, needs-restarting, playground, repoclosure, repograph, repomanage, reposync, system-upgrade
2017-11-16T15:39:16Z DEBUG DNF version: 2.7.5
2017-11-16T15:39:16Z DDEBUG Command: dnf --releasever=27 system-upgrade upgrade
2017-11-16T15:39:16Z DDEBUG Installroot: /
2017-11-16T15:39:16Z DDEBUG Releasever: 27
2017-11-16T15:39:16Z DEBUG cachedir: /var/cache/dnf
2017-11-16T15:39:16Z DDEBUG Base command: system-upgrade
2017-11-16T15:39:16Z DDEBUG Extra commands: ['--releasever=27', 'system-upgrade', 'upgrade']
2017-11-16T15:39:31Z DEBUG repository: uso della cache per adobe-linux-x86_64
2017-11-16T15:39:31Z DEBUG not found deltainfo for: Adobe Systems Incorporated
2017-11-16T15:39:31Z DEBUG not found updateinfo for: Adobe Systems Incorporated
2017-11-16T15:39:31Z DEBUG adobe-linux-x86_64: usando metadati di gio 26 ott 2017 06:39:15 CEST.
2017-11-16T15:39:31Z DEBUG Impossibile scaricare ' https://mirrors.fedoraproject.org/metalink?repo=updates-released-f27&arch...' : Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for https://mirrors.fedoraproject.org/metalink?repo=updates-released-f27&arch... [Could not resolve host: mirrors.fedoraproject.org].
2017-11-16T15:39:31Z DDEBUG Cleaning up.
2017-11-16T15:39:32Z SUBDEBUG
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/dnf/repo.py", line 229, in _perform
return super(_Handle, self).perform(result)
File "/usr/lib64/python3.6/site-packages/librepo/__init__.py", line 1522, in perform
_librepo.Handle.perform(self, result)
librepo.LibrepoException: (8, "Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for https://mirrors.fedoraproject.org/metalink?repo=updates-released-f27&arch... [Could not resolve host: mirrors.fedoraproject.org]", 'An Curl handle error')
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/dnf/repo.py", line 909, in load
if self._try_revive():
File "/usr/lib/python3.6/site-packages/dnf/repo.py", line 857, in _try_revive
return self._try_revive_by_metalink()
File "/usr/lib/python3.6/site-packages/dnf/repo.py", line 810, in _try_revive_by_metalink
handle._perform()
File "/usr/lib/python3.6/site-packages/dnf/repo.py", line 233, in _perform
raise _DetailedLibrepoError(exc, source)
dnf.repo._DetailedLibrepoError
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/python3.6/site-packages/dnf/cli/main.py", line 64, in main
return _main(base, args, cli_class, option_parser_class)
File "/usr/lib/python3.6/site-packages/dnf/cli/main.py", line 99, in _main
return cli_run(cli, base)
File "/usr/lib/python3.6/site-packages/dnf/cli/main.py", line 115, in cli_run
cli.run()
File "/usr/lib/python3.6/site-packages/dnf/cli/cli.py", line 1010, in run
self._process_demands()
File "/usr/lib/python3.6/site-packages/dnf/cli/cli.py", line 763, in _process_demands
load_available_repos=self.demands.available_repos)
File "/usr/lib/python3.6/site-packages/dnf/base.py", line 353, in fill_sack
self._add_repo_to_sack(r)
File "/usr/lib/python3.6/site-packages/dnf/base.py", line 118, in _add_repo_to_sack
repo.load()
File "/usr/lib/python3.6/site-packages/dnf/repo.py", line 931, in load
raise dnf.exceptions.RepoError(msg)
dnf.exceptions.RepoError: Sincronizzazione cache non riuscita per il repo 'updates'
2017-11-16T15:39:32Z CRITICAL Errore: Sincronizzazione cache non riuscita per il repo 'updates'
Why the offline update try to connect to "updates" online repo?
What's happen ? someone can help me?
Many thanks
--
Dario Lesca
(inviato dal mio Linux Fedora 26 Workstation)
3 years, 9 months
- 7
- 12
cups-browsed regression?
by David A. De Graaf
I've freshly installed Fedora 27 on two machines; neither have a
printer directly connected, but rely on cups-browsed to display the
LAN's printers that are attached to, and managed by other (F26) machines.
Not any more. cups-browsed seems to have lost its ability to detect
automatically those network printers. Is anyone else seeing this? Or
have I screwed up, somehow?
For earlier Fedoras I've edited /etc/cups/cups-browsed.conf to add:
BrowseAllow 192.168.2.0/24
to restrict browsing to my LAN, but now there's a comment
# If there are no "Browse..." lines at all, all servers are accepted.
so that edit shouldn't be necessary. I've tried with and without it,
but F27 browsing still fails.
In the system-config-printer GUI I can still click thru a bunch of steps
to search for and find those network printers. And then use them. But
that's tedious and much less useful than the previous totally automatic
availability of all printers across the LAN.
Is this a regression?
--
David A. De Graaf DATIX, Inc. Hendersonville, NC
dad(a)datix.us www.datix.us
3 years, 9 months
- 3
- 5
What the heck is a rc.local stop job?
by Tom Horsley
I just rebooted my fedora 27 partition to get new kernel
running, and I had to hit the reset button because it
stuck here forever:
A stop job is running for /etc/rc.d/rc.local Compatibility
There is no bloody rc.local script that runs on shutdown,
it exists for running stuff at boot. What has systemd
done now and how do I make it stop?
3 years, 9 months
- 6
- 7
Install Fedora 27 on HP Elitebook Folio 1040: Bootloop
by fedora
Lately, I wanted to install Fedora 27 on the above HW. It uses UEFI
instead of BIOS. Install, that means:
1. Download the Fedora Server Netinstall
Fedora-Server-netinst-x86_64-27-1.6.iso and dd it to a micro SD card.
2. Create an approp ks file on the local Web http://install.lan.
3. Boot from the micro SD card and add the ks file link to the linux
boot-line.
4. Let nature take its course
5. Reboot into runlevel 3
6. dnf -y update
7. dnf -y groupinstall “Xfce Desktop”
8 dnf -y install sddm
9. systemctl enable –force sddm
But when rebooting (setp 5) the laptop went into a boot loop. There was
a message showing up for about half a second, which said:
System BootOrder not found. Initializing default.
Creating boot file BOOT0000 with Fedora on file abcdefghik.
Reset System.
Fortunately there is a Boot-Option “Boot from EFI file”, which let me
select the grubx64.efi file as boot file. Using this, the laptop booted
correctly.
Using efibootmgr (efibootmgr -o 0,1,2)I could not set the BootOrder,
i.e. I could set it, but it was lost across the BootProcess. The only
thing, which was saved across the BootProcess was the BootNext option
(set with efibootmgr -n 3).
To automate the BootProcess I did the following:
su -
cd /boot/efi/EFI
cp fedora/grubx64.efi BOOT
efibootmgr -b 0 -l EFI/BOOT/grubx64.efi
because: apparently the laptop booted from BOOT0000. The above sequence
made it take the file grubx64.efi from BOOT0000 and boot into fedora.
That was, however, not the end of the troubles: After fedora had booted
and the sddm DisplayManager showed up, I could not enter the password,
because the keyboard was irresponsive. But this is another story, which
I solved by installing Centos 7 on the laptop.
suomi
3 years, 9 months
- 2
- 2
Upgrade Centos 6 to Centos 7 (32 Bits)
by Ger van Dijck
Hi all ,
Is there a way to upgrade Centos 6 to Centos 7 (32 Bits) in the same way
as I can upgrade Fedora 26 to Fedora 27 with the utility "dnf
system-upgrade" ?
Regards,
Ger van Dijck.
--
Gemaakt met Opera's e-mailprogramma: http://www.opera.com/mail/
3 years, 9 months
- 5
- 5
Is there a crypto policy or not?
by Tom Horsley
The /etc/ssh/sshd_config file on my fedora 27 partition says:
# To opt out, uncomment a line with redefinition of CRYPTO_POLICY=
# variable in /etc/sysconfig/sshd to overwrite the policy.
# For more information, see manual page for update-crypto-policies(8).
But there is no CRYPTO_POLICY environment variable setting
in /etc/sysconfig/sshd or in supposed system wide file
/etc/crypto-policies/back-ends/openssh-server.config I see
referenced in the sshd.service definition.
3 years, 9 months
- 3
- 2
Maven won't pick up JAVA_HOME
by cen
Perhaps I am just going crazy but maven just won't pick up JAVA_HOME on F27.
1. sudo dnf install maven
2. echo $JAVA_HOME returns
/usr/lib/jvm/java-9-openjdk-9.0.0.181-7.fc27.x86_64 (which includes bin
dir with JDK tools such as javac, keytool etc so it is JDK for sure)
3. Any mvn command results in
The JAVA_HOME environment variable is not defined correctly
This environment variable is needed to run this program
NB: JAVA_HOME should point to a JDK not a JRE
Also tried JDK8 and Oracel Java 9
export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.151-1.b12.fc27.x86_64
export JAVA_HOME=/usr/java/jdk-9.0.1
..same result. I feel like there is some hidden config messing me up
or some weird stuff happening. Anyone has an idea what it could be? Last
time I was still on F26 and it worked.
3 years, 9 months
- 5
- 18