On Thu, December 14, 2006 00:36, Juan Antonio Caballero Molina wrote:
> From: "Manuel Arostegui" <manuel(a)todo-linux.com>
> Subject: Re: Card Network Problem
> To: "For users of Fedora" <fedora-list(a)redhat.com>
> Message-ID:
> <1149.87.217.45.106.1165923619.squirrel(a)webmail.todo-linux.com>
> Content-Type: text/plain;charset=iso-8859-1
>
>
> On Tue, December 12, 2006 12:40, ma1camoj(a)uco.es wrote:
>
>> I apologize if the question is a old post.
>> My question:
>> After a new FC6 installation, the network card not operate
>> Why verification I do:
>> 1) Network Configuration ==>Activate
>> system-config-network Message ==> e100 device eth0 does not seem to be
present, delaying
>> initialization 2) gedit /etc/modprobe.conf ====> alias eth0 e100 3) ifconfig
eth0up ====>
>> eth0: unknown interface: No such device
>> 4) lsmod ====> Module Size Used by ..... e100 40393 0 ...
>>
>>
>>
>> I appreciate any help.
>> Juan Antonio.
>>
>
> Have you look at lspcis output? Is your card there?
>
>
> What ifconfig -a shows?
>
>
> Kind regards.
> Manuel
>
Dear Manuel,
Many thank and sorry for the late post-reply.
I think the card is pluged, because:
lspci ====> 00:0 ... Ethernet Controller Intel Corporation 82557/8/9 [Ethernet Pro
100] (rev08)
Saludos,
Juan Antonio.
What about ifconfig?
Try also dmesg | grep -i eth
All the best.
Manuel