To the end of the kernel line in grub I remove the "rhgb quiet" and add:
nomodeset rdblacklist=nouveau
Then (after adding the rpmfusion-free and non-free repos) I run:
# yum -y install akmod-nvidia kmod-nvidia
And finally reboot. After I get into X I run:
# nvidia-settings
This lets me set my resolution and second monitor options.
--
Chris Kloiber
On 05/31/2010 04:40 AM, Steven P. Ulrick wrote:
>>>> Hi there
>>>>
>>>> Did you do a clean install?
>>>>
>>> Yes. Did a clean install from the DVD, entirely wiped out my old Fedora
12
>>> install.
>>>
>>>
>>>> If this does not work then try the akmod instead of the kmod
>>>> akmod will autotrack in newest kernel mod on boot
>>>>
>>> yum list | grep -i akmod:
>>> akmod-nvidia.x86_64 1:195.36.24-1.fc13.5
>>> @rpmfusion-nonfree
>>> akmods.noarch 0.3.6-3.fc12
>>> @rpmfusion-free
>>>
>>> I used akmod on Fedora 12, and it always worked perfectly for me. In
fact,
>>> everything with the proprietary nVidia driver worked perfectly.
>>>
>>> Steven P. Ulrick
>>>
>> Wow dude... I am really not sure what is going on.
>>
>> From what I hear all people have to do is make sure rpmfusion is in
>> repo and yum update
>>
>> This is the only thread were it has failed like this
>>
>>
>>
>> I guess the only thing left to try is not do it through yum but
>> add/remove software
>>
>> It should not make a bit of difference, but you may want to remove the
>> driver go back to nouveau and try the proprietary driver through
>> add/remove software, as well as the kmod for the kernel version.
>> Then lower protection (selinix) then rdblacklist=nouveau on kernel lines
>> in grub.conf
>
> Agreed, it SHOULDN'T make a difference. But I'll give it a shot...
> 1. "Applications | System | Software Management" (kpackagekit)
> 2. Search for "kmod-nvidia"
> 3. Select "akmod-nvidia"& "kmod-nvidia"
> 4. Install the following packages:
> nvidia-settings
> xorg-x11-drv-nvidia
> nvidia-xconfig
> xorg-x11-drv-nvidia-libs
> kmod-nvidia-2.6.33.4-95.fc13.x86_64
> 5. "Apply"
>
> NOTHING was added to the end of the kernel line in grub.conf. Also, here is
the
> contents of my xorg.conf file as it stands after I installed the above
packages:
> # Xorg configuration created by livna-config-display
>
> Section "Files"
> ModulePath "/usr/lib64/xorg/modules"
> EndSection
>
> Section "ServerFlags"
> Option "AIGLX" "on"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "vesa"
> EndSection
>
> Section "Extensions"
> Option "Composite" "Enable"
> EndSection
>
> So, I'm going to delete xorg.conf, add "rdblacklist=nouveau nomodeset"
to the
> kernel line and reboot...
>
> I'll get back with you in a few minutes.
Well, here's the results: the screen still goes black (and, according to the
monitor itself) and goes into power save mode when it should be starting X.
For kicks I tried rebooting WITHOUT doing the initramfs/dracut stuff. Things did
not go any different than they do when I actually follow the correct
instructions.
One interesting observation: I am doing "rdblacklist=nouveau" and I do not
even
seem to have the "nouveau" driver running? my xorg.conf says "Driver
"vesa""
Perhaps retrying AFTER WORK, and doing "rdblacklist=vesa"?
Anyway, I NEED to get to work.
Steven P. Ulrick