On Tue, 27 Apr 2004 22:14:02 -0600, Rodolfo J. Paiz <rpaiz(a)simpaticus.com>
wrote:
We can do both. As you are working on this, do download the latest
version of Shorewall and read the "Two-Interface Quick Guide." I'll help
you set it up, and they'll be on the Net very soon.
I have downloaded this, but not installed yet. Soon, soon.
I mentioned that I stuffed my firewall settings a couple of days ago. I
installed firestarter in the mistaken belief that it might help me
understand what is going on. What happens now is that wheb I start up, the
computer doesn't recognise the ppp0 interface. Yet, I have opened kppp and
used evolution successfully. Now I don't want to install another firewall
utility which may conflict with firestarter (even more!). So, how do I get
rid of it? Or do you know of it and can help me to set it up properly? (I
can imagine you tearing your hair out in despair!)
In order to be able to help you better, please provide more specific
information or just copy-paste data directly from the screen. For
example, please show me the output of running this command as root:
# rpm -qa | grep samba
results from this:
# rpm -qa | grep samba
samba-client-3.0.0-15
samba-common-3.0.0-15
samba-3.0.0-15
redhat-config-samba-1.1.4-1
Also, try this:
# up2date samba-swat
I tried this and it said I needed some public GPG (PGP?) keys. What does
this mean? I did not get fedora from an official package and maybe I should
not be accessing official sites for packages. What do you suggest? I notice
another thread where someone uses yum and offer a yum.conf file to drop in
the correct directory. Would that be more appropriate? or maybe I need to
change the repository to another one now before I downlaod swat?
Up2date should be able to solve any dependencies automatically for you.
Note that the default up2date servers provided by Red Hat are usually
swamped and kind of slow... have you switched your up2date to a mirror
server yet? If not, go ahead and run the command anyway... it'll work
albeit slowly, and Alexander Dalloz wrote a quick mini-HOWTO on switching
servers that will help you later.
What's the ettyket for leaving out bits? [snip]?
You're welcome to post your /etc/samba/smb.conf file (please refer to
filenames with paths... it's easier for those of us not able to see your
screen). I suggest you run this command (as root, indicated by the #
prompt):
# cat /etc/samba/smb.conf | grep -v ^#
result of /etc/samba/smb.conf | grep -v ^#
workgroup = MYGROUP
server string = Samba Server
; hosts allow = 192.168.1. 192.168.2. 127.
printcap name = /etc/printcap
load printers = yes
; printing = bsd
; guest account = pcguest
log file = /var/log/samba/%m.log
max log size = 50
; password server = <NT-Server-Name>
; password level = 8
; username level = 8
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
; username map = /etc/samba/smbusers
; include = /etc/samba/smb.conf.%m
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
; interfaces = 192.168.12.2/24 192.168.13.2/24
; remote browse sync = 192.168.3.25 192.168.5.255
; remote announce = 192.168.1.255 192.168.2.44
; local master = no
; os level = 33
; domain master = yes
; preferred master = yes
; domain logons = yes
; logon script = %m.bat
; logon script = %U.bat
; logon path = \\%L\Profiles\%U
; name resolve order = wins lmhosts bcast
; wins support = yes
; wins server = w.x.y.z
; wins proxy = yes
dns proxy = no
; preserve case = no
; short preserve case = no
; default case = lower
; case sensitive = no
[homes]
comment = Home Directories
browseable = no
writeable = yes
; [netlogon]
; comment = Network Logon Service
; path = /home/netlogon
; guest ok = yes
; writable = no
; share modes = no
;[Profiles]
; path = /home/profiles
; browseable = no
; guest ok = yes
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
printable = yes
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; read only = yes
; write list = @staff
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[home]
comment = personal directories
path = /home
writeable = yes
guest ok = yes
Which, from all the ;comments, I haven't done much to change the samba
settings at all yet. Sigh!
Also, show me this:
# ifconfig -a
results of #ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:03:CE:89:69:EA
inet addr:192.168.32.0 Bcast:192.168.32.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:88 errors:0 dropped:0 overruns:0 frame:0
TX packets:94 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8024 (7.8 Kb) TX bytes:15304 (14.9 Kb)
Interrupt:11 Base address:0x8000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2414 errors:0 dropped:0 overruns:0 frame:0
TX packets:2414 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1814739 (1.7 Mb) TX bytes:1814739 (1.7 Mb)
# chkconfig --list
results of # chkconfig --list
gpm 0:off 1:off 2:on 3:on 4:on 5:on 6:off
kudzu 0:off 1:off 2:off 3:on 4:on 5:on 6:off
syslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rawdevices 0:off 1:off 2:off 3:on 4:on 5:on 6:off
netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
random 0:off 1:off 2:on 3:on 4:on 5:on 6:off
saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
iptables 0:off 1:off 2:off 3:off 4:off 5:off 6:off
anacron 0:off 1:off 2:on 3:on 4:on 5:on 6:off
atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
irda 0:off 1:off 2:off 3:off 4:off 5:off 6:off
acpid 0:off 1:off 2:off 3:on 4:on 5:on 6:off
apmd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off
pcmcia 0:off 1:off 2:on 3:on 4:on 5:on 6:off
nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off
nfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off
microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off
smartd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
isdn 0:off 1:off 2:on 3:on 4:on 5:on 6:off
autofs 0:off 1:off 2:off 3:on 4:on 5:on 6:off
sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
identd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
portmap 0:off 1:off 2:off 3:on 4:on 5:on 6:off
spamassassin 0:off 1:off 2:on 3:on 4:on 5:on 6:off
sendmail 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rhnsd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off
yum 0:off 1:off 2:off 3:off 4:off 5:on 6:off
tux 0:off 1:off 2:off 3:off 4:off 5:off 6:off
aep1000 0:off 1:off 2:off 3:off 4:off 5:off 6:off
bcm5820 0:off 1:off 2:off 3:off 4:off 5:off 6:off
httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
squid 0:off 1:off 2:off 3:off 4:off 5:off 6:off
winbind 0:off 1:off 2:off 3:off 4:off 5:on 6:off
smb 0:off 1:off 2:off 3:off 4:off 5:on 6:off
messagebus 0:off 1:off 2:off 3:on 4:on 5:on 6:off
snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmptrapd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
hpoj 0:off 1:off 2:on 3:on 4:on 5:on 6:off
xfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off
xinetd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off
named 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
vncserver 0:off 1:off 2:off 3:off 4:off 5:off 6:off
lisa 0:off 1:off 2:off 3:off 4:off 5:on 6:off
vsftpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
canna 0:off 1:off 2:on 3:on 4:on 5:off 6:off
FreeWnn 0:off 1:off 2:on 3:on 4:on 5:off 6:off
dovecot 0:off 1:off 2:off 3:off 4:off 5:off 6:off
dhcrelay 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rwhod 0:off 1:off 2:off 3:off 4:off 5:off 6:off
kadmin 0:off 1:off 2:off 3:off 4:off 5:off 6:off
kprop 0:off 1:off 2:off 3:off 4:off 5:off 6:off
krb524 0:off 1:off 2:off 3:off 4:off 5:off 6:off
krb5kdc 0:off 1:off 2:off 3:off 4:off 5:off 6:off
dhcpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
radvd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
amd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
yppasswdd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ypserv 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ypxfrd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
innd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
mysqld 0:off 1:off 2:off 3:off 4:off 5:off 6:off
postgresql 0:off 1:off 2:off 3:off 4:off 5:off 6:off
wine 0:off 1:off 2:on 3:on 4:on 5:on 6:off
firestarter 0:off 1:off 2:on 3:on 4:on 5:on 6:off
webmin 0:off 1:off 2:on 3:on 4:off 5:on 6:off
xinetd based services:
krb5-telnet: off
rsync: off
eklogin: off
gssftp: off
klogin: off
chargen-udp: off
kshell: off
chargen: off
daytime-udp: off
daytime: off
echo-udp: off
echo: off
services: off
time: off
time-udp: off
cups-lpd: off
sgi_fam: on
ktalk: off
imap: off
imaps: off
ipop2: off
ipop3: off
pop3s: off
rexec: off
rlogin: off
rsh: off
amandaidx: off
amidxtape: off
finger: off
ntalk: off
talk: off
telnet: off
amanda: off
My note; winbind says it is working in level 5 but when I start up the
messages say that winbind fail. Is this also related to Samba? Is it a
service I need? Do I need DNS? Surely I can gat away with not having it?
All that we are doing is not that hard... you are just starting from
scratch. Do not worry... we'll get you straightened out.
I really appreciate
the effort that this takes, to help me.
Shelagh
Cheers,