Re: Apcupsd lockfile problem. (Solved)
david walcroft wrote:
I've tested as far as 'pulling the plug'and now running
"apctest" I get
lockfile errors,would anyone know to fix this. See attachment for some
data.
Thanks david
------------------------------------------------------------------------
2005-10-28 10:35:44 apctest 3.10.18 (21 July 2005) redhat
Checking configuration ...
Attached to driver: usb
sharenet.type = DISABLE
cable.type = USB_CABLE
You are using a USB cable type, so I'm entering USB test mode
mode.type = USB_UPS
Setting up the port ...
apctest FATAL ERROR in apcdevice.c at line 77
Unable to create UPS lock file.
apctest FATAL ERROR in apcdevice.c at line 77
Unable to create UPS lock file.
apctest error termination completed
[david@reddwarf ~]$ sudo apcaccess status
APC : 001,038,0929
DATE : Fri Oct 28 10:51:07 EST 2005
HOSTNAME : reddwarf
RELEASE : 3.10.18
VERSION : 3.10.18 (21 July 2005) redhat
UPSNAME : reddwarf
CABLE : USB Cable
MODEL : Back-UPS CS 650
UPSMODE : Stand Alone
STARTTIME: Fri Oct 28 10:25:28 EST 2005
STATUS : ONLINE
LINEV : 39567.6 Volts
LOADPCT : 42.0 Percent Load Capacity
BCHARGE : 097.0 Percent
TIMELEFT : 14.0 Minutes
MBATTCHG : 50 Percent
MINTIMEL : 3 Minutes
MAXTIME : 30 Seconds
OUTPUTV : 230.0 Volts
DWAKE : 000 Seconds
DSHUTD : 000 Seconds
LOTRANS : 180.0 Volts
HITRANS : 266.0 Volts
ITEMP : 29.2 C Internal
ALARMDEL : Always
BATTV : 13.5 Volts
LINEFREQ : 50.0 Hz
NUMXFERS : 0
TONBATT : 0 seconds
CUMONBATT: 0 seconds
XOFFBATT : N/A
SELFTEST : NO
STATFLAG : 0x02000008 Status Flag
SERIALNO : QB0523330112
BATTDATE : 2005-06-01
NOMBATTV : 12.0
FIRMWARE : 17.v2.I USB FW:v2
APCMODEL : Back-UPS CS 650
END APC : Fri Oct 28 10:51:30 EST 2005
Found out buy RTFM. Had apcupsd running when it should be stopped.
david