USB tuner and kernel.org
Hello list;
I recently bought an Autumn Wave OnAir HDTV USSB tuner.
I read the pvrusb2 driver setup information.
I am logged in as "mick" KDE.
In an xterm as root:
[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.27.21-170.2.56.fc10.x86_64 #1 SMP Mon Mar 23 23:08:10 EDT
2009 x86_64 x86_64 x86_64 GNU/Linux
Under F10 it fails with:
[root@localhost ~]# tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /root/.tvtime/tvtime.xml
xvoutput: No XVIDEO port found which supports YUY2 images.
*** tvtime requires hardware YUY2 overlay support from your video card
*** driver. If you are using an older NVIDIA card (TNT2), then
*** this capability is only available with their binary drivers.
*** For some ATI cards, this feature may be found in the experimental
*** GATOS drivers: http://gatos.souceforge.net/
*** If unsure, please check with your distribution to see if your
*** X driver supports hardware overlay surfaces.
[root@localhost ~]# xawtv
This is xawtv-3.95, running on Linux/x86_64 (2.6.27.21-170.2.56.fc10.x86_64)
xinerama 0: 1440x900+0+0
WARNING: No DGA direct video mode for this display.
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available
[root@localhost ~]# kdetv
/usr/bin/iceauth: creating new authority file /root/.ICEauthority
kbuildsycoca running...
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL
kdetv: could not connect to socket
kdetv: No such file or directory
[root@localhost ~]# v4l-conf
v4l-conf: using X11 display :0.0
dga: version 2.0
WARNING: No DGA direct video mode for this display.
mode: 1440x900, depth=24, bpp=32, bpl=5760, base=unknown
can't open /dev/video0: No such file or directory
[root@localhost ~]# ls -l /dev/video*
ls: cannot access /dev/video*: No such file or directory
[root@localhost ~]# depmod pvrusb2
WARNING: Can't read module pvrusb2: No such file or directory
But:
[root@localhost ~]# lsmod
Module Size Used by
pvrusb2 138896 0
dvb_core 84380 1 pvrusb2
cx2341x 19332 1 pvrusb2
v4l2_common 18560 2 pvrusb2,cx2341x
videodev 40704 1 pvrusb2
v4l1_compat 21380 2 pvrusb2,videodev
tveeprom 21508 1 pvrusb2
xt_limit 11140 8
iptable_mangle 11392 0
ipt_LOG 13828 8
ipt_MASQUERADE 11264 0
nf_nat 25496 1 ipt_MASQUERADE
xt_DSCP 11776 0
nf_conntrack_irc 14392 0
nf_conntrack_ftp 16696 0
fuse 60992 2
bridge 56352 0
stp 10756 1 bridge
bnep 21888 2
sco 19204 2
l2cap 28544 3 bnep
bluetooth 59940 5 bnep,sco,l2cap
sunrpc 191080 3
ip6t_REJECT 12160 2
nf_conntrack_ipv6 22984 2
ip6table_filter 11136 1
ip6_tables 26128 1 ip6table_filter
ipv6 287784 38 ip6t_REJECT,nf_conntrack_ipv6
dm_multipath 23704 0
uinput 16128 0
snd_hda_intel 480032 4
snd_seq_dummy 11396 0
arc4 10240 2
snd_seq_oss 39232 0
ecb 11264 2
snd_seq_midi_event 14848 1 snd_seq_oss
snd_seq 61968 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
crypto_blkcipher 24196 1 ecb
snd_seq_device 15380 3 snd_seq_dummy,snd_seq_oss,snd_seq
rt61pci 28288 0
snd_pcm_oss 52224 0
ata_generic 14084 0
rt2x00pci 14848 1 rt61pci
rt2x00lib 43648 2 rt61pci,rt2x00pci
snd_mixer_oss 23168 1 snd_pcm_oss
snd_pcm 85640 2 snd_hda_intel,snd_pcm_oss
rfkill 17188 1 rt2x00lib
pata_acpi 13184 0
snd_timer 30352 2 snd_seq,snd_pcm
snd_page_alloc 16656 2 snd_hda_intel,snd_pcm
mac80211 214128 2 rt2x00pci,rt2x00lib
snd_hwdep 16392 1 snd_hda_intel
snd 68984 18
snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
k8temp 13056 0
r8169 40964 0
hwmon 11064 1 k8temp
cfg80211 32656 2 rt2x00lib,mac80211
i2c_piix4 18448 0
soundcore 14992 1 snd
firewire_ohci 30468 0
pcspkr 11008 0
shpchp 38300 0
mii 13056 1 r8169
i2c_core 29216 4 pvrusb2,v4l2_common,tveeprom,i2c_piix4
firewire_core 45504 1 firewire_ohci
eeprom_93cx6 10368 1 rt61pci
pata_atiixp 13824 0
floppy 66216 0
wmi 14912 0
crc_itu_t 10240 2 rt61pci,firewire_core
[root@localhost ~]# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 002: ID 046d:c501 Logitech, Inc. Cordless Mouse Receiver
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 11ba:1101
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I then downloaded the latest kernal from kernal.org, configured and compiled it
When I boot it I get "cannot find /dev/root"
Has anyone got this thing to work?
How do you compile tyhe new kernels?
Thanks
Mick M.