On 02/23/2012 10:26 AM, Jeffrey Ross wrote:
This is a system that was upgraded from F15 to F16 via Yum, how can I do:
- confirm which version of grub was used to boot the system
# file - < /dev/sda
The dash is important -- tells file(1) to read from stdin. Example:
_[/root]_(root@atom)_ # file - < /dev/sda /dev/stdin: x86 boot sector; GRand Unified Bootloader, stage1 version 0x3, boot drive 0x80, 1st sector stage2 0x138800, GRUB version 0.94; partition 1: ID=0x83, active, starthead 32, startsector 2048, 1572864 sectors; partition 2: ID=0x82, starthead 8, startsector 1574912, 1048576 sectors; partition 3: ID=0x83, starthead 77, startsector 2623488, 56002560 sectors, code offset 0x48
- re-install the boot record (MBR?) for the version of grub I'm running
onto a replacement drive?
Take a look at grub2-install or grub-install, depending on what you have installed.
-Scott
Thanks... system responded:
/dev/stdin: x86 boot sector; GRand Unified Bootloader, stage1 version 0x3, boot drive 0x80, 1st sector stage2 0x3c0e298, GRUB version 0.94; partition 1: ID=0xfd, starthead 32, startsector 2048, 16580608 sectors; partition 2: ID=0xfd, starthead 254, startsector 16582656, 15360000 sectors; partition 3: ID=0xfd, starthead 254, startsector 31942656, 15360000 sectors; partition 4: ID=0x5, starthead 254, startsector 47302656, 274368512 sectors, code offset 0x48
which means it was GRUB not GRUB2, and a reinstall should simply be "grub-install /dev/sdX"
However the binaries for grub 0.94 are not installed on the system but rather the binaries for grub2 (1.99) and yum doesn't seem to want to let me install the older version of grub.
Last time I tried to upgrade I ran into problems so I'm hesitant to upgrade to grub2
I think my problem was /boot and / are on raid 1 partitions, root is on a raid partition with a superblock of 1.1, /boot is on a superblock of 0.90
I need to get grub reinstalled on /dev/sdb
Thanks, Jeff