Gene Heskett kirjoitti viestissään (lähetysaika torstai, 23. helmikuuta 2006 03:13):
On Wednesday 22 February 2006 19:04, Markku Kolkka wrote:
Blue connector goes to motherboard, the black connector at cable end is for the master and the grey connector in the middle is for the slave.
Hummm, I've been told the black end is the mobo end. Lemme look at mine.
The color coding is specified in the ATA standard: http://t13.org/project/d1410r3b-ATA-ATAPI-6.pdf Annex A.1.2 80-conductor cable assembly using the 40-pin connector: "The System Board connector shall have a blue base and a black or blue retainer. The Device 0 Connector shall have a black base and a black retainer. The Device 1 Connector shall have a gray base and a black or gray retainer."