On 21.01.2017 21:00, poma wrote:
OR
according to "rtl8814au? #10"
https://github.com/diederikdehaas/rtl8812AU/issues/10
$ git clone -b driver-4.3.21
https://github.com/uminokoe/rtl8812AU.git RTL8814AU-uminokoe
$ cd RTL8814AU-uminokoe/
$ git revert -n 9260f77 8d33100
// "Disabled debugging code."
$ curl -s
https://github.com/diederikdehaas/rtl8812AU/commit/3e80ebc.patch | patch -p1
// Enables CONFIG_MP_VHT_HW_TX_MODE
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile
OR
$ git clone
https://github.com/diederikdehaas/rtl8814AU.git RTL8814AU-diederikdehaas
$ cd RTL8814AU-diederikdehaas/
// Adds missing Vendor/Product ID
$ sed -i '/0xA834/ a\\t{USB_DEVICE(0x7392, 0xA833), .driver_info = RTL8814A}, /*
Edimax - Edimax */' os_dep/linux/usb_intf.c
// "Added VHT capabilities."
$ curl -s
https://github.com/uminokoe/rtl8812AU/commit/5f75242.patch | patch -p1
// Enables CONFIG_MP_VHT_HW_TX_MODE
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile
$ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile
$ make -j3
$ su
# cp 8814au.ko /lib/modules/$(uname -r)/updates/
# depmod
# modinfo 8814au
# modprobe -v 8814au
# dmesg:
...
RTL871X: module init start
RTL871X: rtl8814au v4.3.21_17997.20160531
usbcore: registered new interface driver rtl8814au
RTL871X: module init ret=0
...
# modprobe -rv 8814au
# dmesg:
...
RTL871X: module exit start
usbcore: deregistering interface driver rtl8814au
RTL871X: module exit success
...
Hello Diederik,
it seems there are only two Linux RTL8814AU users, so far.
Morris, when you catch some time, would you mind to run a couple iperf tests with
DWA-192,
to see real network throughput results.