On 02/09/16 17:02, Tom Rivers wrote:
On 2/9/2016 3:46 PM, Bob Goodwin wrote:
>
> I can work around the problem by
> having my router powered from a UPS
> and being careful not to reboot the
> router. Once the router reboots the
> various wireless devices I have,
> printer, video cameras, etc. need
> their ac power "recycled" to get them
> connected to the LAN again. Very
> inconvenient at this time of year
> since some of these devices are in
> another building ...
>
> When this happens I can not ping
> those devices, normally I should be
> able to connect to the cameras with
> the browser and reboot them when some
> glitch occurs but now when I lose the
> LAN connection I have to visit them
> and pull the plug. The printer is
> near at hand and toggling the power
> switch gets it back on.
I would make note of the MAC addresses
on each of the devices and check your
router to see if those devices are
connected via wireless link after it
reboots. Also, you may be able to
check the DHCP log of the router to
see if requests are being made for IP
addresses by any of the devices.
Sometimes is will have a table of
devices that have secured IP addresses
and list their associate MAC addresses.
If they are shown as connected via
wireless and are also in the DHCP
table, then try nmap and see what
results you get.
Tom
.
I have gone over the mac's and static
dhcp addresses carefully, notypos or
such there.
Neither journalctl or the router logs
show anything at the times when it fails
to connect or ping those addresses,
those that connect do show, but no clue
about the ones that don't.
[root@Box10 bobg]# ping -c 3 192.168.1.52
PING 192.168.1.52 (192.168.1.52) 56(84)
bytes of data.
From 192.168.1.10 icmp_seq=1
Destination Host Unreachable
From 192.168.1.10 icmp_seq=2
Destination Host Unreachable
From 192.168.1.10 icmp_seq=3
Destination Host Unreachable
--- 192.168.1.52 ping statistics ---
3 packets transmitted, 0 received, +3
errors, 100% packet loss, time 1999ms
pipe 3
All this stuff just worked for several
years until one day last week, I've lost
track of the exact date since it was
just an annoyance at the time ...
Now to add to the confusion I just tried
an F23 portable that doesn't get updated
as often and it connects to the camera
192.168.1.52 that this box10 can't as
shown above. I will try booting another
computer to Fedora 22 and see if it
still works as before ... I suspect that
perhaps something may have changed in
network manager?
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-23/64bit LINUX XFCE POP3