Re: [FC4] Audio no longer works after upgrade from FC 1

[Gilbert Sebenste]

Hello Aaron,

> > I know this was handled *somewhere*, but I can't find it. I
> am trying to
> > use the Alsa mixer to pipe audio from a weather radio into my computer to
> > broadcast out on a web server. After the FC 4 upgrade, there's no
> > sound...the input appears to be at zero. I have been going through the
> > Alsa mixer over the last half hour, trying to get it working, to no avail.
> > can someone help me out here? Thanks!
> >
>  Which channel are you using for the radio input? 
I am using the line-out from the radio to the line-in to my computer. It 
worked 4 hours ago, before I upgraded FC 1 to FC 4.

> At the bottom of that
>  channel and the output channel you are using do you fins MM or 00? It
>  should be 00, and hit M to change it if it is MM. What level do you
>  have in these channels, and have you properly adjusted the channels
>  with the arrow keys? These things normally are the difference between
>  sound and silence. 
I used aumix (which shows all is well), and Alsa. I can hear system 
sounds, bells and dings and the like, but no weather radio coming form 
line in on the PC. I verified that my current install of icecast and 
darkice are working.

*******************************************************************************
Gilbert Sebenste                                                     ********
(My opinions only!)                                                  ******
Staff Meteorologist, Northern Illinois University                      ****
E-mail: sebenste(a)weather.admin.niu.edu                                  ***
web: http://weather.admin.niu.edu                                      **
Work phone: [phone]                                                *
*******************************************************************************