How i start Network eth0 without NetworkManager

[Müslüm Ejder]

First : It's my 1. mail to a mailing-list so if i make something wrong
please tell me.

I use FC11 x84_64 and are new on GNU/Linux systems to learn.
I removed NetworkManager because it changed my /etc/resolv.conf on every
reboot after installing the bind server (cache and forward first named
server).

now i must start my Network Interface eth0 manually after every reboot.
what can i do to start eth0 on Boot ?

This is my Configuration in /etc/sysconfig/network-scripts/ifcfg-eth0

# Networking Interface
DEVICE=eth0
BOOTPROTO=static
DNS1=192.168.2.1
GATEWAY=192.168.2.254
HWADDR=00:19:66:a9:38:2e
IPADDR=192.168.2.1
NETMASK=255.255.255.0
ONBOOT=yes
TYPE=Ethernet
PREFIX=24
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
IPV6INIT=no
USERCTL=no

Thanks in advance

[agraham]

On 07/06/2009 08:26 PM, Frank Murphy wrote:
>  On 06/07/09 20:23, Müslüm Ejder wrote:
>
>  <snip>
>     
> > now i must start my Network Interface eth0 manually after every reboot.
> > what can i do to start eth0 on Boot ?
> >
> >      
>
>  In a terminal
>
>  su
>  chkconfig --levels 345 network on
>
>  Should do it.
>
>  Regards,
>
>  Frank
>
>      
You should probably add:

chkconfig NetworkManager off

[Ed Landaveri]

[root@malchik ~]# chkconfig --list network
network         0:off   1:off   2:off   3:off   4:off   5:off   6:off
[root@malchik ~]# chkconfig network on
[root@malchik ~]# chkconfig --list network
network         0:off   1:off   2:off   3:on   4:on   5:on   6:off
[root@malchik ~]# !sync
sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync;sync

 I usually don't use Network-Manager if it's a server, anyway probably is going to
be attached on ethernet && runlevel 3.

Regards


+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+
|E|d|u|a|r|d|o| |L|a|n|d|a|v|e|r|i|
+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+-+

+-+-+-+-+-+-+-+-+-+ +-+-+-+-+ +-+-+-+-+-+-+
|G|N|U|-|L|i|n|u|x| |U|s|e|r| |4|3|3|5|1|2|
+-+-+-+-+-+-+-+-+-+ +-+-+-+-+ +-+-+-+-+-+-+


>  -----Original Message-----
>  From: bruno(a)wolff.to
>  Sent: Mon, 6 Jul 2009 16:11:03 -0500
>  To: mail(a)melinx.de
>  Subject: Re: How i start Network eth0 without NetworkManager
>  
>  On Mon, Jul 06, 2009 at 21:23:52 +0200,
>    Müslüm Ejder <mail(a)melinx.de&gt; wrote:
> > 
> > I removed NetworkManager because it changed my /etc/resolv.conf on every
> > reboot after installing the bind server (cache and forward first named
> > server).
> > 
> > now i must start my Network Interface eth0 manually after every reboot.
> > what can i do to start eth0 on Boot ?
>  
>  Make sure the network service is enabled.
>  
>  --
>  fedora-list mailing list
>  fedora-list(a)redhat.com
>  To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>  Guidelines:
>  http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Bruno Wolff III]

On Mon, Jul 06, 2009 at 21:23:52 +0200,
  Müslüm Ejder <mail(a)melinx.de&gt; wrote:
>  
>  I removed NetworkManager because it changed my /etc/resolv.conf on every
>  reboot after installing the bind server (cache and forward first named
>  server).
>  
>  now i must start my Network Interface eth0 manually after every reboot.
>  what can i do to start eth0 on Boot ? 
Make sure the network service is enabled.

[Müslüm Ejder]

fast & it works! 

Thanks.

[Frank Murphy]

On 06/07/09 20:23, Müslüm Ejder wrote:

<snip>
>  
>  now i must start my Network Interface eth0 manually after every reboot.
>  what can i do to start eth0 on Boot ?
>   
In a terminal

su
chkconfig --levels 345 network on

Should do it.

Regards,

Frank