On Wed, 2005-11-30 at 15:42 +0000, Joao Paulo Pires wrote:
taken from
http://wiki.amule.org:
/sbin/iptables -I RH-Firewall-1-INPUT -p tcp --dport 4662 -j ACCEPT
/sbin/iptables -I RH-Firewall-1-INPUT -p udp --dport 4665 -j ACCEPT
/sbin/iptables -I RH-Firewall-1-INPUT -p udp --dport 4672 -j ACCEPT
At this stage you've told your computer to allow connections to it, but if
you've got a router (as you've said), you also need to do something similar with
it.
You've got to configure it to allow connections to those ports (if it isn't
already), *and* configure it to forward those connections through to the PC you want to
run that program on.
2005-11-29 22:16:55: Connecting to Razorback 2.0 (195.245.244.243 -
195.245.244.243:4661)
2005-11-29 22:16:55: Connected to Razorback 2.0 (195.245.244.243:4661)
2005-11-29 22:16:55: Warning: Razorback 2.0 (195.245.244.243:4661) - NG :
Your 4662 port is not reachable. Please review your network config.
This indicates that port 4662, at least, is blocked before your computer even gets to see
it. That could be at your router, it could be at your ISP.
Post what router your have, and someone may guide you on reconfiguring it.
-------------
Hi Tim and everybody,
This wk I set up directly on Conceptronic Router (C54RU...). I followed instructions at
site
http://www.portforward.com/ . First I got IP, then on router I enabled port
forwarding and set up the three ports and put IP. But when I restarted I got another IP,
then I got again LowID. Any help? Best regards, Joao.