anyway, is there a doc that gives one advice about a sane partitioning? it's not really a "small" SSD -- you can pack a lot into 128G. i'm just looking to be as intelligent about this as possible.
Do not know about sane partitioning but I have the same system that I bought with a 160GB ssd and the 750GB spinning rust. I have been running with this partitioning for about seven months. The first disk set-up was let Fedora pick.
[agagne@dw-agagne ~]$ df -h Filesystem Size Used Avail Use% Mounted on rootfs 50G 7.7G 40G 17% / devtmpfs 7.9G 0 7.9G 0% /dev tmpfs 7.9G 2.1M 7.9G 1% /dev/shm tmpfs 7.9G 884K 7.9G 1% /run /dev/mapper/vg_dwagagne01-lv_root 50G 7.7G 40G 17% / tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup tmpfs 7.9G 0 7.9G 0% /media /dev/sda2 497M 114M 358M 25% /boot /dev/mapper/vg_dwagagne01-lv_home 81G 11G 67G 14% /home /dev/mapper/vg_dwagagne02-lv_opt 50G 2.0G 46G 5% /opt /dev/mapper/vg_dwagagne02-lv_vmachines 250G 127G 111G 54% /vmachines /dev/mapper/vg_dwagagne02-lv_scratch 200G 30G 160G 16% /scratch
Alan
On Fri, 13 Jul 2012, Alan J. Gagne wrote:
anyway, is there a doc that gives one advice about a sane partitioning? it's not really a "small" SSD -- you can pack a lot into 128G. i'm just looking to be as intelligent about this as possible.
Do not know about sane partitioning but I have the same system that I bought with a 160GB ssd and the 750GB spinning rust. I have been running with this partitioning for about seven months. The first disk set-up was let Fedora pick.
[agagne@dw-agagne ~]$ df -h Filesystem Size Used Avail Use% Mounted on rootfs 50G 7.7G 40G 17% / devtmpfs 7.9G 0 7.9G 0% /dev tmpfs 7.9G 2.1M 7.9G 1% /dev/shm tmpfs 7.9G 884K 7.9G 1% /run /dev/mapper/vg_dwagagne01-lv_root 50G 7.7G 40G 17% / tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup tmpfs 7.9G 0 7.9G 0% /media /dev/sda2 497M 114M 358M 25% /boot /dev/mapper/vg_dwagagne01-lv_home 81G 11G 67G 14% /home /dev/mapper/vg_dwagagne02-lv_opt 50G 2.0G 46G 5% /opt /dev/mapper/vg_dwagagne02-lv_vmachines 250G 127G 111G 54% /vmachines /dev/mapper/vg_dwagagne02-lv_scratch 200G 30G 160G 16% /scratch
sorry, i'm not sure what's going on up there. first, are you saying that when you installed, you picked both drives as installable devices and you just went with with what the installer chose for the first (SSD) drive?
and i'm assuming that you used your entire 2nd drive for the "02" volume group, is that it?
rday