--- On Tue, 7/20/10, David A. Paredes Rios davidapr@gmail.com wrote:
From: David A. Paredes Rios davidapr@gmail.com Subject: My laptop Speakers Doesn't Mute then i connect the headphones on FC13 To: "Community support for Fedora users" users@lists.fedoraproject.org Date: Tuesday, July 20, 2010, 8:15 AM
HelloIm having this weird problem, when i connect any headphones to the laptop jack, i can hear de sound from bot sources, headphones and speakers, any ideas on how to solve this? Fedora Release: Fedora release 13 (Goddard) Kernel Version: 2.6.33.6-147.fc13.i686
Installed Pulseaudio packages:pulseaudio-module-bluetooth-0.9.21-6.fc13.i686pulseaudio-utils-0.9.21-6.fc13.i686 alsa-plugins-pulseaudio-1.0.22-1.fc13.i686pulseaudio-module-jack-0.9.21-6.fc13.i686pulseaudio-gdm-hooks-0.9.21-6.fc13.i686pulseaudio-module-x11-0.9.21-6.fc13.i686wine-pulseaudio-1.1.38-1.fc13.i686 pulseaudio-libs-0.9.21-6.fc13.i686pulseaudio-libs-glib2-0.9.21-6.fc13.i686pulseaudio-0.9.21-6.fc13.i686pulseaudio-module-gconf-0.9.21-6.fc13.i686
From lspci | grep Audio command:00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) From cat /proc/asound/card0/codec#* | grep Codec command:
Codec: Analog Devices AD1984ACodec: LSI ID 1040[dparedes@dparedes ~]$
Any guide to solve this?
Thanks guys.
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
On Tue, Jul 20, 2010 at 10:24 AM, Antonio Olivares olivares14031@yahoo.comwrote:
--- On Tue, 7/20/10, David A. Paredes Rios davidapr@gmail.com wrote:
From: David A. Paredes Rios davidapr@gmail.com Subject: My laptop Speakers Doesn't Mute then i connect the headphones on FC13 To: "Community support for Fedora users" users@lists.fedoraproject.org Date: Tuesday, July 20, 2010, 8:15 AM
HelloIm having this weird problem, when i connect any headphones to the laptop jack, i can hear de sound from bot sources, headphones and speakers, any ideas on how to solve this? Fedora Release: Fedora release 13 (Goddard) Kernel Version: 2.6.33.6-147.fc13.i686
Installed Pulseaudio packages:pulseaudio-module-bluetooth-0.9.21-6.fc13.i686pulseaudio-utils-0.9.21-6.fc13.i686
alsa-plugins-pulseaudio-1.0.22-1.fc13.i686pulseaudio-module-jack-0.9.21-6.fc13.i686pulseaudio-gdm-hooks-0.9.21-6.fc13.i686pulseaudio-module-x11-0.9.21-6.fc13.i686wine-pulseaudio-1.1.38-1.fc13.i686
pulseaudio-libs-0.9.21-6.fc13.i686pulseaudio-libs-glib2-0.9.21-6.fc13.i686pulseaudio-0.9.21-6.fc13.i686pulseaudio-module-gconf-0.9.21-6.fc13.i686
From lspci | grep Audio command:00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) From cat /proc/asound/card0/codec#* | grep Codec command:
Codec: Analog Devices AD1984ACodec: LSI ID 1040[dparedes@dparedes ~]$
Any guide to solve this?
Thanks guys.
--
David A. Paredes R.
-----Inline Attachment Follows-----
Can you run $ alsamixer -c 0
and there adjust the settings, maybe there you can find more information?
Regards,
Antonio
-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pusing in the headset causes a disconnect in the loop that feeds the speakers.
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pushing in the headset causes a disconnect in the loop that feeds the speakers.
On Tue, Jul 20, 2010 at 09:59:11AM -0700, JD wrote:
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pushing in the headset causes a disconnect in the loop that feeds the speakers.
that's what I always thought, too, that it was like the old-fashioned stereo where there was a mechanical switch in the headphone jack that broke the circuit to the speakers.
but that's not the way modern laptop audio works. or if it is, then I'm totally confused. why? 'cause on my eeepc 901 I had the same problem, i.e. plug in the phones (or external speakers) and the internal speakers continue to "speak".
Not until I found the right incantation for the config file this thread speaks of did the speakers shut off when something was plugged into the headphone/line-out jack.
Now if that's not under software control, I don't know how else you would describe it.
Fred
On 07/21/2010 12:59 AM, JD wrote:
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pushing in the headset causes a disconnect in the loop that feeds the speakers.
You're living in the past :-). With many modern sound cards its a software action. Plugging in headphones sends a signal to the software, and you can select the action which occurs. This is needed so you can, for example, mute an entire 7.1 setup when headphones are plugged in.
Steve
On 07/20/2010 10:06 AM, fred smith wrote:
On Tue, Jul 20, 2010 at 09:59:11AM -0700, JD wrote:
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pushing in the headset causes a disconnect in the loop that feeds the speakers.
that's what I always thought, too, that it was like the old-fashioned stereo where there was a mechanical switch in the headphone jack that broke the circuit to the speakers.
but that's not the way modern laptop audio works. or if it is, then I'm totally confused. why? 'cause on my eeepc 901 I had the same problem, i.e. plug in the phones (or external speakers) and the internal speakers continue to "speak".
Not until I found the right incantation for the config file this thread speaks of did the speakers shut off when something was plugged into the headphone/line-out jack.
Now if that's not under software control, I don't know how else you would describe it.
Fred
I have no such incantation on my machine :) In fact I don't even have that file. So, perhaps my machine is too old (bought in 2004).
On 07/20/2010 12:58 PM, JD wrote:
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pusing in the headset causes a disconnect in the loop that feeds the speakers.
I happen to have USB headphones. While Fedora does not automatically switch, I have to go to Preferences/Sound and select the output and input devices.
On 07/20/2010 12:05 PM, Jerry Feldman wrote:
On 07/20/2010 12:58 PM, JD wrote:
On 07/20/2010 08:29 AM, David A. Paredes Rios wrote:
With the command alsamixer -c 0 i get this options: Master --- PCM --- Mic -- Mic Boos --- Beep --- Dock --- Dock Mic ---- Dock mic boost --- Internal mic --- Internal mic boost
Nothing else with alsamixer -c0
I hate to be an harbinger of bad news - but... muting the pc speakers when you plug in the headset is done by the headset jack or soundcard itself, and not by software. It is a mechanical event. Pusing in the headset causes a disconnect in the loop that feeds the speakers.
I happen to have USB headphones. While Fedora does not automatically switch, I have to go to Preferences/Sound and select the output and input devices.
Right. My laptop must be "old hat". It does it automatically without the SW solutions every one posted.