ron wrote: hello,
I s there some way to set the pci device to another setting other than ttyS14? I am experimenting with some live cds and they do not include ttyS14 in their modem setups.
My fedora core dmesg says:
ttyS14 at I/O 0xa000 (irq = 3) is a 16550
usually adding a sym link modem in /dev with:
ln -sf /dev/ttyS14 /dev/modem
works.
Mikkel wrote: I think you are stuck making the symlink. The problem is that the driver for the PCI I/O card is setting the port to ttyS14, so it is the driver that would need to be changed. If you were not using live CDs, you could create a udev rule, but this is not really an option for live CDs. (You could also use setserial to change the device.)
Mikkel,
Thanks,
# setserial <space> /dev/ttyS4 <space> port <space> 0xa000 <space> irq <space> 3 <space> uart <space> 16550A <space> spd_vhi
worked for me. Your correct the driver is setting the device.
Kernel 2.6.11-11_FC3AS/SMP
Model Marquis-1814T
I can recommend this company:
ASL Labs:
Marquis K814T
http://www.aslab.com/products/workstations/marquisk814_spec.html
http://www.aslab.com/products/workstations/marquisk814.html
jpeg
http://www.aslab.com/images/products/ATX_side_view.jpg
http://www.aslab.com/images/products/front_view_hotswap.jpg
http://www.aslab.com/images/products/side_view.jpg
Marquis K814T Specifications.
Motherboard: ASUS A8N-E ATX motherboard
CPU: AMD(r) Athlon(r) 64 or Athlon 64 FX processor, .13 or .09 micron, 512K or 1M L2 cache, 800mhz or 1Ghz HyperTransport Link, Socket 939 64-bit integer registers, 128-bit SSE/SSE2 registeres 48-bit virtual addresses, 40-bit physical addresses AMD 64-bit x86 instruction set extensions
Chipset: Nvidia(r) nForce 4 Ultra
Memory Subsystem: Four DIMM banks supporting up to 4GB1 PC-3200 ECC unbuffered SDRAM memory, single or dual channel (128-bit) memory access Note: 128-bit memory access requires even number of memory modules.
-ron-