F10 recent network problem
by Dennis Mattingly
Hello,
I have Fedora 10 on my Home-Desktop.
I enjoy it a lot, but this recent issue is bugging me.
My internet suddenly broke last week.
The problem looks like my router, but I swear it's not the router.
ORIGINAL SETUP
Duration: Last 5 months
Setup: Connect Computer -> Router -> CableBox
Result: INTERNET works good
But now this setup doesn't work anymore.
CURRENT PROBLEM
Duration: Started Last week
Setup: Connect Computer -> Router -> CableBox (same setup as before)
Result: INTERNET is broken
However, if I skip the router (connect computer -> cablebox) my internet
still works fine.
I bought a brand-new router. Same problem, still no internet.
I bought a brand-new cable cords. Same problem, no internet.
I think the problem is NetworkManager.
I think maybe I clicked some things in NetworkManager and my router doesn't
work anymore.
Can anybody help me?
I really want a router, but Fedora 10 does not work with it.
MORE INFORMATION
(when connected to router)
$ ping (router IP address)
Network is unavailable
$ service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0...PING 70.179.96.1 (70.179.96.1) from
70.179.101.94 eth0: 56(84) bytes of data.
--- 70.179.96.1 ping statistics ---
4 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms
pipe 3
failed. [FAILED]
$ cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet
DEVICE=eth0
HWADDR=XX:XX:XX:XX:XX:XX
BOOTPROTO=dhcp
TYPE=Ethernet
ONBOOT=yes
USERCTL=no
PEERDNS=yes
IPV6INIT=no
Thanks
15 years
Question(s) default firewall in Fedora
by Antonio Olivares
Dear fellow Fedora users,
According to some users, Fedora has a default firewall that adds basic protection. There is no service "firewall", but some users have pointed out that iptables takes care of this.
[root@localhost ~]# service iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0
3 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
5 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
[root@localhost ~]#
services running at boot using chkconfig
[root@localhost ~]# chkconfig --list
NetworkManager 0:off 1:off 2:on 3:on 4:on 5:on 6:off
acpid 0:off 1:off 2:on 3:on 4:on 5:on 6:off
akmods 0:off 1:off 2:on 3:on 4:on 5:on 6:off
anacron 0:off 1:off 2:on 3:off 4:on 5:on 6:off
atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
auditd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
avahi-daemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off
bluetooth 0:off 1:off 2:off 3:on 4:on 5:on 6:off
btseed 0:off 1:off 2:off 3:off 4:off 5:off 6:off
bttrack 0:off 1:off 2:off 3:off 4:off 5:off 6:off
capi 0:off 1:off 2:off 3:off 4:off 5:off 6:off
cpuspeed 0:off 1:on 2:on 3:on 4:on 5:on 6:off
crond 0:off 1:off 2:on 3:on 4:on 5:on 6:off
cups 0:off 1:off 2:on 3:on 4:on 5:on 6:off
dnsmasq 0:off 1:off 2:off 3:off 4:off 5:off 6:off
firstboot 0:off 1:off 2:off 3:off 4:off 5:off 6:off
gpm 0:off 1:off 2:on 3:on 4:on 5:on 6:off
haldaemon 0:off 1:off 2:off 3:on 4:on 5:on 6:off
httpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ip6tables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
iptables 0:off 1:off 2:on 3:on 4:on 5:on 6:off
irda 0:off 1:off 2:off 3:off 4:off 5:off 6:off
irqbalance 0:off 1:off 2:off 3:on 4:on 5:on 6:off
isdn 0:off 1:off 2:on 3:on 4:on 5:on 6:off
kerneloops 0:off 1:off 2:off 3:on 4:on 5:on 6:off
lm_sensors 0:off 1:off 2:off 3:off 4:off 5:off 6:off
mdmonitor 0:off 1:off 2:on 3:on 4:on 5:on 6:off
messagebus 0:off 1:off 2:on 3:on 4:on 5:on 6:off
microcode_ctl 0:off 1:off 2:on 3:on 4:on 5:on 6:off
multipathd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
mysqld 0:off 1:off 2:off 3:off 4:off 5:off 6:off
netconsole 0:off 1:off 2:off 3:off 4:off 5:off 6:off
netfs 0:off 1:off 2:off 3:on 4:on 5:on 6:off
netplugd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:off 3:off 4:off 5:off 6:off
nfs 0:off 1:off 2:off 3:off 4:off 5:off 6:off
nfslock 0:off 1:off 2:off 3:on 4:on 5:on 6:off
nscd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ntpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ntpdate 0:off 1:off 2:off 3:off 4:off 5:off 6:off
nvidia 0:off 1:off 2:on 3:on 4:on 5:on 6:off
pcscd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
portreserve 0:off 1:off 2:on 3:on 4:on 5:on 6:off
psacct 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rdisc 0:off 1:off 2:off 3:off 4:off 5:off 6:off
restorecond 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off
rpcgssd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
rpcidmapd 0:off 1:off 2:off 3:on 4:on 5:on 6:off
rpcsvcgssd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
rsyslog 0:off 1:off 2:on 3:on 4:on 5:on 6:off
saslauthd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
sendmail 0:off 1:off 2:on 3:on 4:on 5:on 6:off
setroubleshoot 0:off 1:off 2:off 3:on 4:on 5:on 6:off
slmodemd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
smartd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
smolt 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmpd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
snmptrapd 0:off 1:off 2:off 3:off 4:off 5:off 6:off
sshd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
udev-post 0:off 1:on 2:on 3:on 4:on 5:on 6:off
winbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off
wine 0:off 1:off 2:on 3:on 4:on 5:on 6:off
wpa_supplicant 0:off 1:off 2:off 3:off 4:off 5:off 6:off
ypbind 0:off 1:off 2:off 3:off 4:off 5:off 6:off
Which traffic if any is allowed to come in to our computers if and when we do get on the internet?
We can use system-config-??? to configure simple iptables to change stuff around and/or get webmin?
I know that by default Fedora provides a good basic firewall, but are there any howto's/readme's as to how to learn more about Firewalls in Fedora.
Thanks,
Antonio
15 years
Re: Q about installing F10 from Live DVD
by Jackson Byers
ect: Re: Q about installing F10 from Live DVD
jackson byers wrote:
> Well, the f10liveinstall cd didnt work for me,
> ( see f10 liveinstall cd trashed my main fc5)
Well, FC5 is long out of support, that's what you get for waiting so long
until you finally upgrade. (Hint: you're supposed to upgrade at each or
every other release, not wait 5 releases and then install in parallel,
still keeping the totally outdated version.)
Kevin Kofler
---------
jbyers;
I am fully aware that I was/am way out of date, and fully nonsupported in
fc5.
I _was_ trying to install the current f10
(which i think you would encourage)
but wanted to retain fc5 until i successfully installed f10,
surely a safe practice.
Instead I got my main fc5 clobbered by
some combination of
--my own inexperience
--a live/install cd that did not have a "custom" option.
or i couldnt see it.
David's experience also was that there was no custom option.
I purchased my cd from OSDisc.com
Fedora 10 KDE Edition - install/Live CD
is this some outdated version?
or a deficient version?
not officially supported?
How is one to know?
Jack
15 years
Re: Q about installing F10 from Live DVD
by Jackson Byers
David replied
> if it insists on that, I wasnt prepared for it,
> having only sdb6 i was willing to give to f10.
I wrote about this the other day but I don't recall ever seeing it show up.
First: A Live-CD *does not* install separate packages. A Live-CD writes
itself to your hard similar to the way you burn an ISO to a CD.
It will *erase your harddisk* and then write itself exactly as it is. You
have no choices of anything.
You boot the CD. You are looking at the OS running from memory. You decide
to install it to your harddrive so you click the install icon. It formats
your drive and writes itself to your drive. Exactly as it is on the CD. You
reboot, answer a few questions and you are basically done.
And *whatever* was on the HD before is gone. Period.
The size of the CD it limited but they have put what most people would need.
Anything else you install from the online repos.
All of that aside I would seriously doubt that you could update a Fedora
Core 5 install directly to a Fedora 10 install anyway. Too many years and
too many changes. If you do a fresh install the has been updates since the
Fedora 10 Live-CD was made. Probably another CD full of them.
David
---------------
>It formats
>your drive and writes itself to your drive.
>Exactly as it is on the CD. You
>reboot, answer a few questions and you are basically done.
yes but that doesnt answer my confusion as to how it chooses
the hard drive or harddrive partition to write on.
and whether it is forcing LVM on me
and whether it is forcing a separate /boot partition.
I have two scsi disks, sda, sdb
I was trying to point it to my sdb6
it clobbered my sda1
Are you saying liveinstallcd will try to
take over my either my entire sda or my entire sdb?
> I would seriously doubt that you could update a Fedora
>Core 5 install directly to a Fedora 10 install anyway.
??? this doesnt make sense to me.
I thot the liveinstall was a fresh install,
nothing to do with "update"
thanks for response
Jack
15 years
Patching Vanilla Kernels with Fedora Patches
by Dominic Driver
Hi All,
This is my first interaction with the list - hope this is the right place for this question!
I recently installed Fedora 10 onto a development machine, and updated the kernel to
2.6.27.19-170.2.35.fc10.i686
During development of a C++ application for this machine, I was required to update and rebuild the Intel Graphics Driver for XOrg in order to fix a problem with the version of the driver I had. As I understand it, the latest version of the Intel Graphics Driver uses libraries that have been moved into the kernel with version 2.6.28.
I therefore downloaded the source for Kernel 2.6.28.6, rebuilt the kernel and the graphics driver, and fixed the issue with graphics I was having.
Unfortunately, I now have the situation when using the Vanilla 2.6.28.6 kernel results in extremely slow burn speeds when writing to DVD-RW Drives. Where I previously had average burn speeds of 10-11x, I now have average speeds of 2.2x. Since this is core functionality for the C++ application I'm developing, it's something of a problem.
My question is:
Is it possible to apply the Fedora-specific patches for my Fedora Kernel (I have the source code for 2.6.27.19-170.2.35.fc10.i686 ) to the Vanilla 2.6.28.6 kernel in order to see if this fixes my drive speeds?
If so, how do i go about this?
Thanks for any help in advance,
--
Dominic Driver
Engineer
Paragon Electronic Design Limited
15 years
can't reconncet vpn after config my network
by nathan
Hi guys
When I configed my network, and reactived it, I found that I could not
reconnect my vpn,
I typed vpnc in command line the response is 'no response from target
daemon'
What's wrong with my performance? What else should I restart again after
I config my network? (I am using network instead of networkmanager)
thanks in advance
nathan
15 years
What packages to install Chinese language
by winglion
I just install the colinux and use the the fedora 10 image povide by colinux.It is a english install.
But I am Chinse and want to install Chinese locale and language support! What package should I install for
full Chinese support! Or how to find or pick up pakages I need .
thx!
winglion
winglion1(a)163.com
2009-04-22
15 years
Re: Effect on ssh of altering target's assigned ip address
by Cameron Simpson
On 23Apr2009 12:15, Dave Feustel <dfeustel(a)mindspring.com> wrote:
| Everything seems to be working wrt the switch now. The problem I am now
| trying to resolve is why the initial windows load via ssh of XMaple
| takes 1 minute 38 seconds. Every complete repaint of the XMaple window takes
| approximately the same amount of time. This makes using X11 to run
| Maple an agonizingly slow process - too slow to put up with.
We should probably discuss this on the other thread, but ...
| > | So does a change of IP address for an ssh target affect the way ssh works?
| > | > You might also try "arp" to see if the IP<->MAC mapping is correct.
| >
| > "arp -an" is the fast incantion to test.
| -------------------
| 2/home/daf}arp -an
| ? (192.168.6.1) at 00:22:3f:db:f3:90 [ether] on eth0
This lets you examine what MAC addresses the local host thinks other
hosts have. If you have access to the other host you can check for
correctness (eg using ifconfig).
| 2/home/daf}ssh -l daf $C4a
I presume '$C4a' is a shell var of your containing a host or IP addr?
| The authenticity of host '192.168.6.32 (192.168.6.32)' can't be
| established.
| RSA key fingerprint is af:6e:39:4a:4f:15:0d:ed:c9:01:06:e5:11:60:66:1c.
| Are you sure you want to continue connecting (yes/no)? yes
| Warning: Permanently added '192.168.6.32' (RSA) to the list of known
| hosts.
Fine.
| Password:
| Last login: Tue Apr 21 12:57:12 2009 from 192.168.3.1
| motd
Ssh aborts here?
| 2/home/daf}echo $C4a
| 192.168.6.32
| 2/home/daf}
Try an "arp -an" now. Should be an entry for 192.168.6.32.
| Note that the ssh session terminated immediately after the successful
| login. This has happened several times this afternoon and I have no
| idea why.
My first idea is that more that one machine on your network is using the
IP address 192.168.6.32, or that or your local host. This will cause
trouble. The exact behaviour varies with the OS, but it will include
aborted TCP connections (as the wrong host gets a packet and rejects it
as not being for a current connection).
| > Ssh keeps a ~/.ssh/known_hosts file that logs host keys and IP addresses
| > and host names in order to detect when things change (i.e. to check if
| > an imposter has arrived).
|
| I deleted the known_hosts file to get rid of the entries with obsolete
| ip addresses.
Ok.
| > We would need to see the output of "ssh -v .....", but you should fix
| > ping first. If ping doesn't work, ssh almost certainly won't, and for
| > reasons having nothing to do with ssh itself.
|
| Ping works fine now. Ssh works. It's just way too slow running XMaple.
I would now start using the "ethtool" command to examine the ethernet
interfaces on your local host and on the remote one. If, for example,
one end is half duplex instead of full duplex you will see horrible
performance problems much like what you describe.
Do I recall you're using a gigabit switch? Are you using cat6 cables
throughout?
Cheers,
--
Cameron Simpson <cs(a)zip.com.au> DoD#743
http://www.cskk.ezoshosting.com/cs/
These aren't the droids you're looking for.
15 years