On 08/26/2014 06:05 PM, Tim wrote:
On Tue, 2014-08-26 at 12:10 -0600, jd1008 wrote:
> It is a slider about 2mm or 2.5mm long and almost 1mm thick.
> When in the up position (towards the corner which goes into the
> controller) it is supposed to tell the controller write lock off
> (disabled). But it is not working in my machine because some bloggers
> say that the slider needs to protrude a little farther away from the
> body of the sd card in order for the sensor to turn off (the
> on-by-default) write lock.
I can't remember if you've already made a comment about trying this; but
have you tried putting a sticker around the card?
I tried 1 layer of tape over the lock slider. More than 1 layer
of tape makes the card too hard to insert into the slot. It really
is a very tight does not seem to provide much play root.