Re: Nut,usb and installation
On Sun, 25 Sep 2005, david walcroft wrote:
Matthew Saltzman wrote:
>
> What's in /etc/sysconfig/ups?
>
Information requested in the attachment.
david
Reproduced here.
# If the UPS is locally attached set it to "yes"
SERVER=yes
# Model of the UPS (filename to call for it, without path)
# Example - one of
# apcsmart - APC SMartUPS and similar
# fentonups - Fenton UPS
# optiups
# bestups
# genericups
# ups-trust425+625
# upsdrvctl
# You MUST change this, or set SERVER to "no"
# To support multiple drivers, set MODEL=upsdrvctl
MODEL=Powermate-3105
This parameter can't be just anything--it needs to be the name of the nut
driver that handles your UPS. I don't see Powermate listed in the README
in /usr/share/nut-*/ and I don't see it in the compatibility list at
http://www.networkupstools.org/compat/. So you need to figure out if
the protocol used by your Powermate is compatible with any of the listed
devices. If so, use that driver. If not, try MODEL=genericups and see if
that gets you anywhere.
# UPS device - needed if UPS is locally attached
DEVICE=/dev/ttyS0
# Any options to pass to $MODEL
# ex. for my TrippLite UPS, use
# OPTIONS="-t 5"
OPTIONS=
# Any options to pass to upsd
UPSD_OPTIONS=
#
# [End]
--
Matthew Saltzman
Clemson University Math Sciences
mjs AT clemson DOT edu
http://www.math.clemson.edu/~mjs