(will update to FC3 soon)
FC1 x86
I just added an Adaptec 29160 and for now one old hard drive
a snip of dmesg gives me
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 17755614 512-byte hdwr sectors (9091 MB)
sda: unknown partition table
but no matter what I do, where I look cant find my disk
like fdisk /dev/sda give unable to open device.
/proc/scsi/scsi only has my two pseudo scsi devices in it
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATAPI Model: CD-RW 52X24X Rev: MB53
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: TOSHIBA Model: CD/DVDW SD-R5372 Rev: TU53
Type: CD-ROM ANSI SCSI revision: 02
doing echo "scsi add-single-device 1 0 0 0" > /proc/scsi/scsi
only adds an entry do /log/messges, does not change /proc/scsi/scsi
s output
also /proc/scsi seems to be a bit shy of things
Am I missing something really simple ?
TIA,
-PETE
in /proc/scsi
find /proc/scsi
/proc/scsi
/proc/scsi/sg
/proc/scsi/sg/version
/proc/scsi/sg/host_strs
/proc/scsi/sg/host_hdr
/proc/scsi/sg/hosts
/proc/scsi/sg/device_strs
/proc/scsi/sg/device_hdr
/proc/scsi/sg/devices
/proc/scsi/sg/debug
/proc/scsi/sg/def_reserved_size
/proc/scsi/sg/allow_dio
/proc/scsi/ide-scsi
/proc/scsi/ide-scsi/0
/proc/scsi/scsi
the SCSI part of dmesg ...
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ATAPI Model: CD-RW 52X24X Rev: MB53
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: CD/DVDW SD-R5372 Rev: TU53
Type: CD-ROM ANSI SCSI revision: 02
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 895C
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160N Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue f6fbde14, I/O limit 4095Mb (mask 0xffffffff)
(scsi1:A:0): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: SEAGATE Model: ST410800N Rev: 0016
Type: Direct-Access ANSI SCSI revision: 02
blk: queue f6fbdc14, I/O limit 4095Mb (mask 0xffffffff)
scsi1:A:0:0: Tagged Queuing enabled. Depth 32
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr1: Hmm, seems the drive doesn't support multisession CD's
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 17755614 512-byte hdwr sectors (9091 MB)
sda: unknown partition table
scsi : 1 host left.
The key being