Sound input on Fedora 15

[Michael Eager]

Sound output through my motherboard's Intel HDA ACL888 works OK.
Sound input does not work.

Alsa lists the ACL888 as well as a video capture card.
Pulseaudio (pacmd list-sources) shows the card and says that it only has
internal audio monitor, not hardware input.

Any suggestions on how to fix this?

# arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: ALC888 Analog [ALC888 Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
card 1: Bt878 [Brooktree Bt878], device 0: Bt87x Digital [Bt87x Digital]
   Subdevices: 0/1
   Subdevice #0: subdevice #0
card 1: Bt878 [Brooktree Bt878], device 1: Bt87x Analog [Bt87x Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0


# pacmd
list-sources
2 source(s) available.
     index: 0
         name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
         driver: <module-alsa-card.c>
         flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
         state: RUNNING
         suspend cause:
         priority: 1950
         volume: 0: 100% 1: 100%
                 0: 0.00 dB 1: 0.00 dB
                 balance 0.00
         base volume: 100%
                      0.00 dB
         volume steps: 65537
         muted: no
         current latency: 0.00 ms
         max rewind: 344 KiB
         sample spec: s16le 2ch 44100Hz
         channel map: front-left,front-right
                      Stereo
         used by: 1
         linked by: 1
         configured latency: 20.00 ms; range is 0.50 .. 1999.82 ms
         monitor_of: 0
         card: 0 <alsa_card.pci-0000_00_1b.0>
         module: 4
         properties:
                 device.description = "Monitor of Internal Audio Analog Stereo"
                 device.class = "monitor"
                 alsa.card = "0"
                 alsa.card_name = "HDA Intel"
                 alsa.long_card_name = "HDA Intel at 0xf9ff8000 irq 310"
                 alsa.driver_name = "snd_hda_intel"
                 device.bus_path = "pci-0000:00:1b.0"
                 sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
                 device.bus = "pci"
                 device.vendor.id = "8086"
                 device.vendor.name = "Intel Corporation"
                 device.product.id = "293e"
                 device.product.name = "82801I (ICH9 Family) HD Audio
Controller"
                 device.form_factor = "internal"
                 device.string = "0"
                 module-udev-detect.discovered = "1"
                 device.icon_name = "audio-card-pci"


-- 
Michael Eager	 eager(a)eagercon.com
1960 Park Blvd., Palo Alto, CA 94306  650-325-8077