Search of archives working???
by Brian K Bonner
I've looked on the fedora-list-test, and fedora-list for information about
booting with the CD. I'm finding it difficult to find much with the
search facility at:
http://www.redhat.com/archives/fedora-list/
I'll search on dosutils and it returns zero results. Yet, searching on
cdrom and boot yields several hits where one of them includes:
<snip>
If you are making a boot disk under windows and you have the ISO images
mounted to your CDROM DISC
then you can go into dosutils folder on the first disc <<<<<<<<<<<<<
Note this line
and use the rawritewin application to make a BOOT DISK on a 1.44MB floppy
disk. The bootdisk.img file is also located on the first CDROM
installation
disk.
</snip>
Any suggestions on effective ways to use this search?
- Brian
20 years
- 1
- 0
Re: POP to mbox converter?
by Erik P. Olsen
** Reply to message from Greg Wildman <rhlist(a)itns.co.za> on Mon, 31 May 2004
18:30:14 +0200
> Erik P. Olsen said the following on 30/05/2004 21:41:
> > I am in the process of converting from OS/2 to Linux and I have thousands of
> > e-mails saved in separate pop files. Does anybody know of a program that can
> > convert all these pop files into mbox files? Or if I would have to it myself
> > what is the precise structure of those mboxes?
>
> What is a POP file? Sound like a Maildir format to me unless you saved
> each individual mail to file.
Yes, the individual messages are saved to individual files, not by me though -
by the mail program.
>
> Anyways, try maildir2mbox
> http://www.die.net/doc/linux/man/man1/maildir2mbox.1.html
No, it's not maildir.
--
Regards,
Erik P. Olsen
20 years
- 1
- 0
FC2 on Intel 440GX (was FC1 on Intel 440GX)
by MW Mike Weiner (5028)
I was just wondering if the kind individuals that put together the 440GX
boot disk for FC/1 would consider doing one for FC/2 - or provide the
build instructions so that one can recreate a new one for FC/2. Any
word?
I used yum to upgrade the 440GX box FROM FC/1 TO FC/2 but I will run
into the installation problem again, soon. My hope was that the 440GX
Boot Disk would be updated in the near term.
Michael Weiner
20 years
- 4
- 4
DVD again
by Frío Polar
Hi all:
I'm using FC2 and everytime I put a DVD-RW on the DVD tray I have the
next log in /var/log/messages
May 31 18:22:11 iglu kernel: hdc: packet command error: status=0x51 {
DriveReady SeekComplete Error }
May 31 18:22:11 iglu kernel: hdc: packet command error: error=0x30
May 31 18:22:11 iglu kernel: ATAPI device hdc:
May 31 18:22:11 iglu kernel: Error: Medium error -- (Sense key=0x03)
May 31 18:22:11 iglu kernel: (reserved error code) -- (asc=0x57,
ascq=0x00)
May 31 18:22:11 iglu kernel: The failed "Read Cd/Dvd Capacity" packet
command was:
May 31 18:22:11 iglu kernel: "25 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 "
It's quite strange because on FC 1 all works fine and I'm still using
the same brand of DVD. I was googling and and try to disable autofs and
magicdev but all seems the same... What can I do in order to be able to
burn DVD on mi machine?
--
___________
Frío Polar
http://www.saladelfrio.com
20 years
- 1
- 0
Re: ATI Radeon 7000 and DRI
by ed
On Thu, 2004-05-27 at 07:53, Alan wrote:
>
> > I have a Radeon 7000 card on an Athlon system with a SiS motherboard.
> >
> > I installed Fedora Core 2 on it. X worked all through the install.
> >
> > When I rebooted the system, the screen goes black and the system hangs.
> > (Or at least X goes into a state I cannot get out of without a hard
> > reboot.)
>
> Can't you get to a text console with Ctrl-Alt-F1 ?
>
> I'm interested because I have an ATI Rage Mobility P/M card
> in my Sony C1VFK which will only work at DefaultDepth 8.
> Otherwise I get a black screen gradually shrinking to a white screen -
> but I can always get to a text console.
>
> > If I comment out the dri line in /etc/X11/xorg.conf, it works fine, but
> > I do not get hardware acceleration.
>
> I tried this, but it had no effect in my case.
>
> It seems to me the Xorg "ati" driver is less than perfect.
>
>
>
I have a Dell Latitude with an ATI Mobility Radeon that has the same
problem. My workaround, is to get to a command prompt, logon as a user
and then issue the startx command. Then I get the GUI without problems.
I am not sure why this works, but it's a workaround.
I did try commenting out the dri line but still had the same issue.
This laptop had no problems with FC1
20 years
- 2
- 1
kickstart...
by MG
Hi!
How can I use the kickstart in Fedora?
I have to configure the system in kickstart program.
Does it create a boot disc? Or how does it work?
Bye!
Gábor
20 years
- 1
- 0
Re: FC-2 Add/Remove Applications rant ...
by Erik Hemdal
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 31 May 2004 09:23:37 -0500
> From: Charles Howse <chowse(a)charter.net>
> Subject: Re: FC-2 Add/Remove Applications rant ...
> To: fedora-list(a)redhat.com
> Message-ID: <200405310923.41941.chowse(a)charter.net>
> Content-Type: Text/Plain; charset="iso-8859-1"
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On Sunday 30 May 2004 04:27 pm, William Hooper wrote:
> > Shaun T. Erickson said:
> > > <rant>
> > > Why is it that it insists on only looking for the rpms on the
> > > installation CDs? Why can't I tell it to brose to the
> local directory,
> > > where I have all of them stored?
> >
> > less /usr/share/doc/system-config-packages-1.2.12/README
> >
> > "You can instead use a Red Hat Linux installation tree with
> the option
> > '-tree=/path/to/tree' or use a directory with Red Hat Linux
> ISO images
> > with the option '--isodir=/path/to/dir'."
>
> This is excellent information, however, I tried it and get
> the following
> error:
>
> [charles@moe charles]$ l /home
> total 24
> drwx------ 35 charles charles 4096 May 31 08:39 charles
> drwxrwxr-x 2 root root 4096 May 31 08:35 fc2_iso
> drwx------ 2 root root 16384 May 20 04:20 lost+found
>
> [charles@moe charles]$ l /home/fc2_iso
> total 2247632
> - -rw-rw-r-- 1 root root 681377792 May 31 08:48 fc2.disc1.iso
> - -rw-rw-r-- 1 root root 665755648 May 31 08:58 fc2.disc2.iso
> - -rw-rw-r-- 1 root root 668950528 May 31 09:03 fc2.disc3.iso
> - -rw-rw-r-- 1 root root 203706368 May 31 09:07 fc2.disc4.iso
> - -rw-rw-r-- 1 root root 79511552 May 31 09:09 fc2.rescue.iso
>
>
. . . . Python traceback removed
> Same thing happens when I do it from a root shell.
> Any ideas?
>
> - --
> Charles Howse
> Jackson, TN
> Registered Linux User # 347576 (http://counter.li.org)
> GnuPG ID - 1F5130A8
It looks like you're trying to read a directory full of ISO CD-ROM
images instead of a directory of RPM packages. Either mount these
images via a loopback device, so you can see the actual contents of the
ISO's, or burn them to CD and copy the resulting RPM's back to disk.
Erik
20 years
- 3
- 2
fedora core 2 xmms + mpg123 rpms available (fwd)
by Tony Perrie
I compiled the xmms 1.2.10 rpm for fc2 with mpg123 and vorbis support if
interested.
http://k-lug.org/~hoyhoy/rpms/fc2/
Tony
20 years
- 2
- 1
problem with scsi cd writer
by Louis-Marius_Pineau＠teluq.uquebec.ca
I recently upgraded my system to FC2 from RH9 (I actually reinstalled
everything from scratch) and I am having trouble making my scsi cd
writer to work. I am using xcdroast. when I try to add /dev/scd0 to the "add device manually" option, after a while, the system hang.
I repeated the process many time and I managed to get the content of dmesg before the system got completely locked up. Since I thought that
my symbios scsi adapter was a bit old (sym 53c875), I switched it with
an adaptec (aha2940uw) and end up with the same results but this time
the adaptec adapter wa a bit more verbose.
I know that the cd writer works fine because it worked prefectly on RH9.
I even put it on another system on which I had White Box Linux 3.0
installed and it do work perfectly.
What can I do to make my cd writer work?
here is what I get from the symbios logic controller:
sym0:4:0:phase change 2-1 10@3f772360 resid=8.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:8:0: ABORT operation started.
sym0:8:0: ABORT operation timed-out.
sym0:4:0: ABORT operation started.
sym0:4:0: ABORT operation timed-out.
sym0:8:0: ABORT operation started.
sym0:8:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: DEVICE RESET operation started.
sym0:1:0: DEVICE RESET operation timed-out.
sym0:4:0: DEVICE RESET operation started.
sym0:4:0: DEVICE RESET operation timed-out.
sym0:8:0: DEVICE RESET operation started.
sym0:8:0: DEVICE RESET operation timed-out.
sym0:1:0: BUS RESET operation started.
sym0: SCSI BUS reset detected.
sym0: SCSI BUS has been reset.
sym0:1:0: BUS RESET operation complete.
sym0:4:0:phase change 2-1 10@20724360 resid=8.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
sym0:1:0: ABORT operation timed-out.
sym0:1:0: ABORT operation started.
here is what I get from the adaptec controller:
settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: WDC WD1200JB-00EVA0, ATA DISK drive
hdd: WDC WD1200JB-00DUA3, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 1024KiB
hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdc: hdc1
hdd: max request size: 1024KiB
hdd: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hdd: hdd1
hda: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 515k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:1): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:1:0: Tagged Queuing enabled. Depth 4
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: PLEXTOR Model: CD-R PX-W4012S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:8): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: SEAGATE Model: ST336607LW Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:8:0: Tagged Queuing enabled. Depth 4
SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 8, lun 0
sym0: <875> rev 0x3 at pci 0000:02:05.0 irq 11
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCSI BUS has been reset.
scsi1 : sym-2.1.18j
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda8
Starting XFS recovery on filesystem: sda8 (dev: sda8)
Ending XFS recovery on filesystem: sda8 (dev: sda8)
Freeing unused kernel memory: 144k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ACPI: Power Button (FF) [PWRF]
ehci_hcd 0000:02:07.2: EHCI Host Controller
ehci_hcd 0000:02:07.2: irq 10, pci mem 4284f000
ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:02:07.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 10, io base 0000b000
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 11, io base 0000b800
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:02:07.0: UHCI Host Controller
uhci_hcd 0000:02:07.0: irq 11, io base 0000a400
uhci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:02:07.1: UHCI Host Controller
uhci_hcd 0000:02:07.1: irq 11, io base 0000a800
uhci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm(a)uk.sistina.com
Adding 2097128k swap on /dev/sda5. Priority:-1 extents:1
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
XFS mounting filesystem sdb1
Starting XFS recovery on filesystem: sdb1 (dev: sdb1)
Ending XFS recovery on filesystem: sdb1 (dev: sdb1)
XFS mounting filesystem hdc1
Starting XFS recovery on filesystem: hdc1 (dev: hdc1)
Ending XFS recovery on filesystem: hdc1 (dev: hdc1)
XFS mounting filesystem hdd1
Ending clean XFS mount for filesystem: hdd1
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
XFS mounting filesystem sda7
Starting XFS recovery on filesystem: sda7 (dev: sda7)
Ending XFS recovery on filesystem: sda7 (dev: sda7)
XFS mounting filesystem sda9
Starting XFS recovery on filesystem: sda9 (dev: sda9)
Ending XFS recovery on filesystem: sda9 (dev: sda9)
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (dev: sda3)
Ending XFS recovery on filesystem: sda3 (dev: sda3)
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
IA-32 Microcode Update Driver: v1.13 <tigran(a)veritas.com>
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
(scsi0:A:4:0): No or incomplete CDB sent to device.
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
(scsi0:A:4:0): No or incomplete CDB sent to device.
(scsi0:A:4:0): Protocol violation in Message-in phase. Attempting to abort.
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x5b 0x53 0x78 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 4 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 0
Card NEXTQSCB = 10
QINFIFO entries: 10 7 2 5 1 11 6 4
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
10 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x63 0x51 0xcb 0x0 0x0 0x2 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]#
_root@zebryon:~\[root@zebryon root]# dmesg
sda7)
Ending XFS recovery on filesystem: sda7 (dev: sda7)
XFS mounting filesystem sda9
Starting XFS recovery on filesystem: sda9 (dev: sda9)
Ending XFS recovery on filesystem: sda9 (dev: sda9)
XFS mounting filesystem sda2
Ending clean XFS mount for filesystem: sda2
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (dev: sda3)
Ending XFS recovery on filesystem: sda3 (dev: sda3)
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022db720(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
IA-32 Microcode Update Driver: v1.13 <tigran(a)veritas.com>
microcode: No suitable data for cpu 0
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
inserting floppy driver for 2.6.5-1.358
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:02.0: 3Com PCI 3c905B Cyclone 100baseTx at 0x9400. Vers LK1.1.19
divert: allocating divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 970C
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
(scsi0:A:4:0): No or incomplete CDB sent to device.
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
(scsi0:A:4:0): No or incomplete CDB sent to device.
(scsi0:A:4:0): Protocol violation in Message-in phase. Attempting to abort.
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x5b 0x53 0x78 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 4 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 0
Card NEXTQSCB = 10
QINFIFO entries: 10 7 2 5 1 11 6 4
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
4 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
10 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x0 0x63 0x51 0xcb 0x0 0x0 0x2 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 7 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
7 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:1:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 0
Card NEXTQSCB = 10
QINFIFO entries: 10 2 5 1 11 6 7
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
7 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
10 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 1 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:1:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
scsi0:0:4:0: Attempting to queue an ABORT message
CDB: 0x25 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
scsi0:0:4:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi0:0:4:0: Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0:0:4:0: Command found on device queue
aic7xxx_abort returns 0x2002
scsi0:0:8:0: Attempting to queue an ABORT message
CDB: 0x2a 0x0 0x1 0xa0 0x0 0x38 0x0 0x0 0x8 0x0
scsi0: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State in Message-in phase, at SEQADDR 0x16f
Card was paused
ACCUM = 0x0, SINDEX = 0x21, DINDEX = 0x65, ARG_2 = 0x0
HCNT = 0x0 SCBPTR = 0x6
SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0xf] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x2] SCSIRATE[0xf] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0xd]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0xa8]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0x37 0x60 0x0 0x199
SCB count = 12
Kernel NEXTQSCB = 10
Card NEXTQSCB = 0
QINFIFO entries: 0 2 5 1 11 6
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 3 0 1 5 4 7 2 8 9 10 11 12 13 14 15
Sequencer SCB Info:
0 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
1 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
2 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
3 SCB_CONTROL[0xe8] SCB_SCSIID[0x17] SCB_LUN[0x0] SCB_TAG[0xff]
4 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
5 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
6 SCB_CONTROL[0xc8] SCB_SCSIID[0x47] SCB_LUN[0x0] SCB_TAG[0x3]
7 SCB_CONTROL[0xe8] SCB_SCSIID[0x87] SCB_LUN[0x0] SCB_TAG[0xff]
8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
Pending list:
6 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
11 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
1 SCB_CONTROL[0x70] SCB_SCSIID[0x17] SCB_LUN[0x0]
5 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
2 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
0 SCB_CONTROL[0x70] SCB_SCSIID[0x87] SCB_LUN[0x0]
3 SCB_CONTROL[0x48] SCB_SCSIID[0x47] SCB_LUN[0x0]
Kernel Free SCB list: 7 4 9 8
Untagged Q(4): 3
DevQ(0:1:0): 0 waiting
DevQ(0:4:0): 0 waiting
DevQ(0:8:0): 0 waiting
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:8:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 0x2002
--
Louis-Marius Pineau | Email: Louis-Marius_Pineau(a)teluq.uquebec.ca
Télé-Université | Tel: (418) 657-2747 ext. 5295
455 rue de l'Église, CP 4800 | Fax: (418) 657-2094
Québec, Québec, Canada, G1K 9H5
-------------------------------------------------------------------------------
20 years
- 1
- 0
Re: How to install FC2 from harddisk
by Mac
Aubrey.Lee,您好！
I've just tried out some excellent ways to install FC2 from ISO files from FAT-Formatted partitions. Now I share them to all who's interested in.
The main idea is to use the Linux Kernel-vmlinuz! The directory of FC2disk1/images/pxeboot is very useful(See README in the some directory)! OK, you can just follow my instructions below:
1, create a new directory named "install" (any you like).
2, copy the two files, "vmlinuz" and "initrd.img" in the "pxeboot"(just mentioned above), into the dir made in step 1.
3, copy a LOADLIN.EXE (for dos edtion, available in other distributions of linux) into the some dir.
4, in the some dir, create a Batch File named "install.bat" that contains this line:
loadlin vmlinuz initrd=initrd.img ramdisk_size=9216 %1 %2 %3 %4 %5 %6 %7 %8 %9
Now boot your system into DOS mode, enter the "install" directory, type "install" to run "install.bat" which could launch the installing process. Just follow the screen, and enjoy yourself!
Mac
Harbin, China
======= 2004-06-01 17:18:19 您在来信中写道：=======
>hi,
>
>I have downloaded the ISO of FC2. and I wanna install it from my harddisk,
>but when I extracted the first ISO, No dosutilts subdir fount. So I don't
>know how to install FC2 from harddisk. Any suggestiones are all welcome.
>
>thank you!
>
>
>Aubrey.Lee
>
>
>--
>fedora-list mailing list
>fedora-list(a)redhat.com
>To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
>
= = = = = = = = = = = = = = = = = = = =
macshy(a)tom.com
2004-06-01
20 years
- 1
- 0