users May 2004

users@lists.fedoraproject.org

1371 participants
2284 discussions

[FC2] Anyone with successful Samba connections?
by Dexter Ang 30 May '04

30 May '04

Anyone here successful with Samba and FC2? By successful I mean the following: 1. Browse Samba shares on the network using Nautilus (smb:///). - This was possible under FC1, by opening up the following ports: Incoming tcp 139, 445 Incoming udp 137:138 Outgoing udp 137 But I can no longer get it to work. Every other computer on our network (Windows XPs and Fedora Core 1s) can browse the Windows workgroups and shares but me. 2. Have other computers (Windows or Linux or whatever) successfully access Samba shares on your computer, using SHARE level security and a publicly accessible "shared" folder. - The situation is basically this... I am running a laptop and would like others to be able to access a "shared" folder I have created, without being prompted for a username and/or password. When using a Windows machine with the same account name and password, I can access the share. But when on another machine withouy my username, it keeps prompting for a password. What is strange is that I have basically used my old FC1 configuration, which worked successfully. Anyone have a configuration that would work for what I need, a public no-password folder? Samba configuration: workgroup = WORKGROUP server string = Samba Server log file = /var/log/samba/%m.log max log size = 50 security = SHARE encrypt passwords = yes smb passwd file = /etc/samba/smbpasswd socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 wins support = yes guest ok = yes dns proxy = no [shared] comment = Shared Folder on portablepoch path = /home/shared guest ok = yes guest only = yes writeable = yes printable = no create mask = 0664 directory mask = 0775 force user = thepoch force group = thepoch Is there a specific bugzilla or solution I should be looking at? Thanks. dex

1 0

Log Errors Re-Sent
by Colin J Thomson 30 May '04

30 May '04

Hi all, <Re-Sent again, Email server problems> I must say I am very impressed with FC2, thanks to all involved.. I have two error msg's in my Logs (LogWatch) and cannot find any info in the list archives, perhaps someone here could tell me what they are and maybe how to get rid of them, they are: --------------------- Init Begin ------------------------ **Unmatched Entries** open(/dev/pts/0): No such file or directory open(/dev/pts/0): No such file or directory open(/dev/pts/0): No such file or directory SNIP ---------------------- Init End ------------------------- And the Sendmail section : **Unmatched Entries** STARTTLS=server: file /etc/mail/certs/cert.pem unsafe: No such file or directory: 10 Time(s) Perhaps someone could tell me what /dev/pts/0/ and STARTTLS=server: is so I could fix this please, the system runs fine aside from that, its just a little anoying seeing these ;) Thanks in advance, Colin -- Fedora Core 2, Custom Built Kernel 2.6.6 Registered Linux user number 342953

1 0

Any iden what this error message is sying (FC2)?
by clemens＠dwf.com 30 May '04

30 May '04

In the "Connections (secure-log)" section of Logwatch (under FC2) I see a message Ive never seen before, namely: login: pam_succeed_if: requirement "uid < 100" not met by user "reg" Any idea what this is trying to say? What it is trying to warn me about? I am user 'reg' and all user uid's are in fact > 1000, so whats the big deal? -- Reg.Clemens reg(a)dwf.com

2 1

xosview scaling error on DISK throughput
by Richard Pitt 30 May '04

30 May '04

Fedora Core 2 - full install, several hardware platforms I've noted what appears to be a scaling error on the DISK performance. It's telling me I'm getting 195M (I've seen Gig!) throughput on what should only be giving me at most 40-80Megs. I can't believe the new disk drivers are that much better ;) Works fine on RH9 and Core 1 BTW - I love the NFSD/NFS charts on the new version. Anyone else use xosview? richard -- - Richard C. Pitt Pacific Data Capture richard(a)pacdat.net 604-644-9265 http://richard.pacdat.net www.pacdat.net PGP Fingerprint: FCEF 167D 151B 64C4 3333 57F0 4F18 AF98 9F59 DD73

1 0

FC2 - more soundcard weirdness emu10k1 and via82xx
by John Courie 30 May '04

30 May '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Ok I installed the rpm of mplayer via yum. watched a flick. Went to bed. I powercycled the next afternoon. when the system rebooted I had no sound. I have ob sound (via chipset) and a soundblaster live! card. the soundblaster card dosent play anymore. Its not an alsamixer problem I cant even get alsa to asknowledge the card. I tried -c0 -c1 -c2 .... no dice I get this error message "alsamixer: function snd_ctl_open failed for hw:1: No such device" so I dropped to etc, and noticed that I have TWO modprobe.conf files the normal one and then modprobe.conf~ Some setting changed it had to be when I installed mplayer (which is unstable) because I hadn't done anything. I have sound with the via card, FC2 defaults to it and alsa sees it etc etc. But the SB card worked fine on fc2 until now. I am a little confused on modprobe.conf. here is what is in modprobe.conf now... alias eth0 8139too alias snd-card-0 snd-via82xx install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1 alias usb-controller ehci-hcd alias usb-controller1 uhci-hcd install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-via82xx here is what is in modprobe.conf~ alias eth0 8139too alias snd-card-0 snd-via82xx install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1 alias usb-controller ehci-hcd alias usb-controller1 uhci-hcd install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-via82xx { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-via82xx I swapped them renamed them tried commenting out lines. I am lost. does anyone have any insight that the would be willing to share. if so I would be most appreciative - -- ===================================================================== ASCII ribbon campaign ( ) John Courie II ~ against HTML e-mail X GnuPg Key: 0x32F6748D ~ / \ ~ jcourie(a)ontheb.us http://www.metacon.ca/ascii/ johncourie(a)member.fsf.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAuBenI8kVpDL2dI0RAprgAJ4yoUDSwhQBhdRxIB7TgMnRA+CrLwCfcZO4 PeNPuNNaxAn3L1c9CIQtH/M= =U66Q -----END PGP SIGNATURE-----

3 3

[FC2] Can't start mysql
by Coume - Lubox.com 30 May '04

30 May '04

Hello, Is something changed in the way mysql is working under FC2? I have been trying for the last 3hours to get mysql working but I can't. Before I just had to do "mysqld start" to active mysql and that was it, I was even to activate it at boot time. But now, it does not work. It always tells me, "bash: mysqld: command not found" Then I checked if I have installed the mysql packages... but all the packages available are installed. Anybody experienced that? I really hope that it a dumb and easy problem to solve, as I badly need to use mysql today :( Thanks in advance Ludo ______________________________________ http://www.mythTVtalk.com (Now Open!!!) Feel free to assist us in building a MythTV community!

7 14

Win2K and FC 2 dual boot
by Marek Pawinski 30 May '04

30 May '04

Hi Is it only Win XP that has the dual boot problem or Win 2K. The articles i have read seem to differ. -- Marek

6 10

Problems with scsi modules in FC2
by Allan Nielsen 30 May '04

30 May '04

Hi All, I upgraded from RH9 to FC2, and I have a problem with the scsi subsystem. When I try to load a module that uses the scsi subsystem it fails due to an unknown symbol in the modules: --- [root@amd /etc]# modprobe usb-storage WARNING: Error inserting scsi_mod (/lib/modules/2.6.5-1.358/kernel/drivers/scsi/scsi_mod.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting scsi_mod (/lib/modules/2.6.5-1.358/kernel/drivers/scsi/scsi_mod.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting sd_mod (/lib/modules/2.6.5-1.358/kernel/drivers/scsi/sd_mod.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting scsi_mod (/lib/modules/2.6.5-1.358/kernel/drivers/scsi/scsi_mod.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting usb_storage (/lib/modules/2.6.5-1.358/kernel/drivers/usb/storage/usb-storage.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for usb_storage [root@amd /etc]# dmesg scsi_mod: Unknown parameter `max_scsi_luns' scsi_mod: Unknown parameter `max_scsi_luns' sd_mod: Unknown symbol scsi_device_get sd_mod: Unknown symbol scsi_wait_req sd_mod: Unknown symbol scsicam_bios_param sd_mod: Unknown symbol scsi_block_when_processing_errors sd_mod: Unknown symbol scsi_register_driver sd_mod: Unknown symbol scsi_ioctl sd_mod: Unknown symbol scsi_device_put sd_mod: Unknown symbol __scsi_mode_sense sd_mod: Unknown symbol scsi_logging_level sd_mod: Unknown symbol scsi_release_request sd_mod: Unknown symbol scsi_allocate_request sd_mod: Unknown symbol scsi_io_completion sd_mod: Unknown symbol print_sense sd_mod: Unknown symbol print_req_sense sd_mod: Unknown symbol scsi_set_medium_removal scsi_mod: Unknown parameter `max_scsi_luns' usb_storage: Unknown symbol scsi_report_device_reset usb_storage: Unknown symbol scsi_remove_host usb_storage: Unknown symbol scsi_host_put usb_storage: Unknown symbol scsi_scan_host usb_storage: Unknown symbol scsi_add_host usb_storage: Unknown symbol scsi_host_alloc [root@amd /etc]# --- 'rpm -V' shows that there aren't tampered with the kernel or the modules. Any hints? Best regards, Allan -- This message is transmitted on 100% recycled electrons.

1 0

whichcd, redhat-config-**** in FC2
by Globe Trotter 30 May '04

30 May '04

Where has this gone? How does one configure packages, printers, users et al? Also, while we are at it, does whichcd exist for FC2? Thanks a million! __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/

6 10

Re: KDE menus aren't changeable
by Antti Aspinen 30 May '04

30 May '04

Oh I got it. I was stypid, stypid, stypid... I deleted .local and .config and it works now. Thanks a lot! :) -Antti-

1 0

Jump to page: