users February 2006

users@lists.fedoraproject.org

585 participants
786 discussions

apache Virtual host config for cgi
by azeem ahmad 21 Feb '06

21 Feb '06

is this configuration ok to run cgi scripts. ----------------------------------------------------------------------------------------------------------------------------------------- <VirtualHost 1.2.3.4> ServerAlias domain.com ServerAdmin webmaster(a)domain.com DocumentRoot /home/mine/public_html BytesLog domlogs/mine.com-bytes_log ServerName www.domain.com User mine Group mine CustomLog /usr/local/apache/domlogs/mine.com combined AddHandler cgi-script .cgi .html ScriptAlias /cgi-bin/ /home/mine/public_html/cgi-bin/ </VirtualHost> ----------------------------------------------------------------------------------------------------------------------------------------- Regards Azeem

3 2

PC speaker does not speak
by Sam Varshavchik 21 Feb '06

21 Feb '06

Even after modprobing pcspkr (and verifying that it's loaded, via lsmod), I can't seem to make my laptop squawk. "echo -e '\\007'", neither in a terminal window, nor or any one of the ALT-VTs, seems to have any effect. I know that the laptop can squawk -- it does it when I turn it on, so I must be missing some other crucial step.

9 16

how to use an older gcc ?
by Mihamina Rakotomandimby 21 Feb '06

21 Feb '06

Hi, I have to compile qemu 0.8 RPM on a fedora core 4 box. FC4 comes with gcc4 but qemu wont compile with it. How should I do to get temporarily a gcc 3.3.6 just to compile it then get back to my gcc 4? I lost my FC4/FC3 CDs, would you know a (FTP if possibe) repository where I could find a gcc 3.3.6 rpm? -- A powerfull GroupWare, CMS, CRM, ECM: CPS (Open Source & GPL). Opengroupware, SPIP, Plone, PhpBB, JetSpeed... are good: CPS is better. http://www.cps-project.org for downloads & documentation. Free hosting of CPS groupware: http://www.objectis.org.

5 5

dhcp config
by Steven J Lamb 21 Feb '06

21 Feb '06

I am trying to configure dhcpd3 to allocate two pools of addresses based on the requesting router's ip. I have a Cisco router with two interfaces that I would like to give different ip blocks to each group depending on what interface they are connected on. I have things set up so that my log files say connecting via 192.168.0.254 or connecting via 192.168.1.254 depending on the router the dhcp request comes from. however it hands all of the ip's out of the same pool. I could do this with two different servers but I don't want to set up a new instance of dhcp. any suggestions. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: 2/17/2006

2 1

Basic authentication using .htaccess file problem
by Gilbert Sebenste 21 Feb '06

21 Feb '06

Hello all, I have a problem, and I hope someone here can point me the right way. Two different machines, running httpd and httpd.conf, both Fedora Core 4. I have some directories I want passworded on those machines. I developed .htaccess files to do this. It looks like this: AuthType Basic AuthName "The Directory Of Stuff" AuthUserFile /directory/directory/directory/passwordfile require valid-user "Passwordfile" is the actual name of the file with the passwords in it, created by htpasswd. Now, on one machine, this works fine. On the other, it won't let me log in. The "enter login and password" box comes up, but it's like the users don't exist. A look in the Apache logs shows this: [Mon Feb 20 15:58:13 2006] [error] [client 202.11.22.33] MySQL ERROR: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) [Mon Feb 20 15:58:13 2006] [error] [client 202.11.22.33] MySQL user marymary not found: /directory/directory/directory [Mon Feb 20 15:58:16 2006] [error] [client 202.11.22.23] MySQL ERROR: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2) [Mon Feb 20 15:58:16 2006] [error] [client 202.11.22.23] MySQL user marymary not found: /directory/directory/directory "Marymary" and the IP are fictitous, I replaced the real IPs and usernames with that. I created both user names and passwords on each machine (IE, I didn't copy any files over). Any idea what could be wrong? I am fully patched doing "yum update". And it works on one machine, but not the other. Very odd. ******************************************************************************* Gilbert Sebenste ******** (My opinions only!) ****** Staff Meteorologist, Northern Illinois University **** *******************************************************************************

2 1

df, lvm and 6TB arrays oh my!
by Mark Haney 21 Feb '06

21 Feb '06

I am having a problem with df reporting the wrong disk size on a couple of 7TB arrays on a Fedora box we are using. I have an lvm group on each array of 6.36TB when I run df this is what I get: /dev/mapper/Volume02-Volume02lv 2.4T 33M 2.3T 1% /mnt/arrays/array2 /dev/mapper/Volume03-Volume03lv 2.4T 950G 1.3T 43% /mnt/arrays/array1 When I run vg display this is what it reports: pvdisplay PV Name /dev/sdd pvdisplay VG Name Volume03 pvdisplay PV Size 6.36 TB / not usable 6.00 TB pvdisplay Allocatable yes (but full) pvdisplay PE Size (KByte) 4096 pvdisplay Total PE 1666397 pvdisplay Free PE 0 pvdisplay Allocated PE 1666397 pvdisplay PV UUID UlaSJI-9Srm-e3AW-LdNW-g2HG-v6ZE-4yWwPw pvdisplay pvdisplay --- Physical volume --- pvdisplay PV Name /dev/sdc pvdisplay VG Name Volume02 pvdisplay PV Size 6.36 TB / not usable 6.00 TB pvdisplay Allocatable yes (but full) pvdisplay PE Size (KByte) 4096 pvdisplay Total PE 1666397 pvdisplay Free PE 0 pvdisplay Allocated PE 1666397 pvdisplay PV UUID mK7WWj-UV0p-N6Qc-zhx6-EK3J-g0CO-g65ljs I've looked around for a lvm tool to display the correct sizes, but can't find one. Is there something I'm missing? -- Interdum feror cupidine partium magnarum Europae vincendarum Mark Haney Sr. Systems Administrator ERC Broadband (828) 350-2415

5 14

laptop friendly kernel
by akonstam＠trinity.edu 21 Feb '06

21 Feb '06

I am a little behind on laptops. I got sound to work and wireless to work. But it has become obvious that the stock kernels do not support ampd. Is there a place to get them without recompiling the kernel? -- Aaron Konstam Professor Emeritus, Computer Science Trinity University San Antonio, Texas 210-999-7484

2 1

[OT] The GPL and possible violations
by Michael A. Peters 21 Feb '06

21 Feb '06

Having a discussion on the GPL - and the broadcom driver in Linksys routers came up. I'm taking the position that since it is a kernel module, it modifies the kernel when the kernel loads it - and thus, it is no different than if they were shipping a static kernel with the module compiled in, and thus they (Linksys) are in violation of the GPL because they are shipping a modified GPL product (the kernel) without releasing the source to their modifications. Other arguments are that the driver uses the kernel and is not a modification to the kernel. But I don't see how it could be that way, I see it as adding functionality to the Linux kernel (the ability to talk to the broadcom chipset) and as such, they are shipping a modified kernel without also shipping the source. Any GPL license gurus have comment? The implications of my argument are bigger than Linksys - anyone who ships a non GPL compatible driver _with_ the Linux kernel would be in violation of the GPL - including distributions that ship with the nvidia drivers. It wouldn't make the the modules themselves non distributable, just that they are non distributable with the kernel. I'm not positive my interpretation of the GPL is correct though, so I'd like comments from people who know it better than I do.

11 23

Error in ypxfr: free() invalid pointer
by Luis F. V. Gomes 21 Feb '06

21 Feb '06

Hi all. I am trying to turn a fully patched 2.6.11-1.1369_FC4 x86_64 machine into a NIS slave server, binding to either a Solaris 7 or FC2 servers. I reinstalled (yum) ypbind and yp-tools, but I get the same error. I also tried starting ypxfrd locally. Has anybody a clue? The error messages from xfrd are shown below. >[root@Lepus ~]# /usr/lib64/yp/ypinit -s SlaveServer >We will need a few minutes to copy the data from MasterServer. >Transferring mail.byaddr... >Trying ypxfrd ... not running > >/usr/lib64/yp/ypinit: line 37: 18250 >Aborted $YPBINDIR/ypxfr -f -h $MASTER -c -d $DOMAIN $map >YPINIT: WARNING: Couldn't exec /usr/lib64/yp/ypxfr -f -h >MasterServer -c -d my_domain mail.byaddr >Transferring mail.aliases... >Trying ypxfrd ... not running > >*** glibc detected *** /usr/lib64/yp/ypxfr: free(): invalid pointer: >0x00000033d29300f8 *** >======= Backtrace: ========= >/lib64/libc.so.6[0x33d276a71e] >/lib64/libc.so.6(__libc_free+0x6e)[0x33d276ac4e] >/lib64/libc.so.6(xdr_bytes+0xa9)[0x33d27ef419] >/usr/lib64/yp/ypxfr(xdr_valdat+0x18)[0x40359d] >/usr/lib64/yp/ypxfr(xdr_ypresp_val+0x2a)[0x4035d4] >/lib64/libc.so.6(xdr_free+0x15)[0x33d27eed15] >/usr/lib64/yp/ypxfr[0x4025f6] >/usr/lib64/yp/ypxfr[0x403180] >/lib64/libc.so.6(__libc_start_main+0xef)[0x33d271c3cf] >/usr/lib64/yp/ypxfr[0x401ce9] >======= Memory map: ======== >00400000-00405000 r-xp 00000000 09:01 >946049 /usr/lib64/yp/ypxfr >00504000-00506000 rw-p 00004000 09:01 >946049 /usr/lib64/yp/ypxfr >00506000-0058a000 rw-p 00506000 00:00 >0 [heap] >33d2500000-33d251a000 r-xp 00000000 09:01 >4332624 /lib64/ld-2.3.5.so >33d2619000-33d261a000 r--p 00019000 09:01 >4332624 /lib64/ld-2.3.5.so >33d261a000-33d261b000 rw-p 0001a000 09:01 >4332624 /lib64/ld-2.3.5.so [...] Thanks ! ,,, ! (@ @) +--------------------oOO-/-(*)-\-OOo---+----------------------------------+ | Luis Fernando V. Gomes | Email: lf(a)ele.puc-rio.br | Gerente de Suporte | | Dept. Engenharia Eletrica | | PUC-Rio | Voz: +(55) (21) 3114-1220 | R. Marques de Sao Vicente 225/401L | Fax: +(55) (21) 3114-1232 | 22453-900 - Rio de Janeiro/RJ, Brasil| +--------------------------------------+----------------------------------+

2 2

RHCE?
by Jonathan Carpenter 20 Feb '06

20 Feb '06

I am wanting to take the RHCE exam. Can anyone recommend any good books or webpages to study for this exam? Also could I use fedora to study for the exam or will I need to try to purchase a version of the Red Hat Enterprise or something like that? Thanks, -- Jonathan Carpenter

3 2

← Newer
1
...
24
25
26
27
28
29
30
...
79
Older →

Jump to page: